Gunther Pi 26 pirkti naudotą (7 856)

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS260 band saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are essential. The model features a swiveling arm adjustable from 0-60°. The design of the saw bow ensures accurate and quiet operation. It comes with a removable chip tray for easy cleaning! Machine Features This horizontal metal band saw with a swiveling arm allows for cutting perpendicular or at any angle between 0 and 60° to the material axis. The workpiece can be fed manually or with any mechanical device, while the saw blade feed operates automatically. The blade guides are fitted with special carbide inserts and bearings, which greatly improve blade tracking, longevity, straightness, and the quality of the cut. Carbide blade guides significantly reduce wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed-cycle cooling system. The saw’s arm is cast from a single piece of cast iron, and, combined with a 27 mm wide band saw blade, it is fully suitable for serial cutting of both profiles and solid materials. The vice is mounted on an adjustable bed with a quick-release clamp. Blade guides are equipped with carbide inserts and rolling bearing systems. It is the CARBIDE BLADE GUIDES that ensure cutting precision and straightness. The upper part of the base is shaped to form a tray for collecting coolant and chips generated during the cutting process. To the base, a sturdy cast iron work table with a swiveling arm is mounted, along with a control panel on a separate arm. During cutting, the main cutting motion is performed by the moving saw blade, while arm feed is via gravity. The speed of arm descent (cutting speed) is adjusted using a hydraulic cylinder. Feed rate is controlled from the saw’s control panel. There are two blade speeds to choose from: 35 and 70 m/min. In the lower end position of the arm (after cutting the material), the drive to the blade is automatically switched off. Safety is ensured by saw blade guards and microswitches that stop the motor after the cutting cycle or when any guard is opened. Additional protection consists of the automatic saw shut-off in the event of blade breakage. Band saw blade size [mm]: 2520 x 27 x 0.9 Gijdsudi Uzspfx Ah Hsw Blade tension: mechanical (manual) Blade speeds [m/min]: 35, 70 Arm descent adjustment: stepless – hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase 400V Main motor power [kW]: 1.1/1.5 Coolant pump motor power [kW]: 0.05 Dimensions with base [cm]: 150x80x140 Weight [kg]: gross/net - 210 / 180 kg Additionally: - 2 pcs M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Gamybos metai: 2023, būklė: naudotas, Funkcionalumas: ribota funkcionalumas, GÜNTHER - SPLITTER TWIN WAVE Günther SPLITTER Twin Wave yra sijojimo/skirstymo mašina, skirta sunkiai sijojamoms medžiagoms, ypač stambioms, drėgnoms, lipnioms ar užterštoms medžiagoms. Ji naudojama medžiagoms atskirti pagal grūdėtumą ir pašalinti trukdančias dalis, tokias kaip akmenys, molis, mišrios atliekos arba nesusmulkinta medžiaga. Mašina ypač tinka statybinių medžiagų perdirbimui ir ruošimui, ypač statybinių mišrių atliekų, žemės kasimo atliekų bei akmenų ir dirvožemio atvejais. „Twin-Wave” konstrukcija ilgiau išlaiko medžiagą ant sijojimo denio, todėl geriau atsiskiria prilipusios ar molinės dalys. Gijdpfx Aoy N Rlvoh Hew

Būklė: naudotas, tuščias svoris: 6 400 kg, didžiausias leistinas svoris: 31 600 kg, bendras svoris: 38 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 03/2023, krovinio erdvės tūris: 26 m³, pakaba: oras, padangos dydis: 385/65 R22,5, spalva: sidabras, Gamybos metai: 2023, rida: 847 820 km, Įranga: ABS,

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06742-H101-000-000, konvejerio juostos plotis: 1 420 mm, konvejerio juostos greitis: 1 700 mm/s, bendras plotis: 1 420 mm, galia: 4 kW (5,44 AG), ašių atstumas: 2 450 mm, statybos plotis: 1 420 mm, Axle distance: 2,450 mm Belt width: 1,200 mm Overall width: 1,420 mm Side frame height: 310 mm Conveying speed: 1.7 m/s Giedpfxeu S Adrs Ah How Belt specification: EP 400/3 3:1.5 mm, standard quality Profile type: steep conveyor belt, PB 900 mm / PH 32 mm Drive: drum motor, manufacturer Van der Graaf Power: 4.0 kW Motor protection class/efficiency: IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Drum lagging: metallic surface Return drum: Ø 190 mm, crowned Bearing: maintenance-free tension bearings, Ø 50 mm Carrying rollers: Ø 63.5 mm equipped with buffer rings Carrying roller pitch: 500 mm Carrying roller bearings: maintenance-free Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Tensioning station: threaded spindle M16

Būklė: naudotas, tuščias svoris: 6 420 kg, bendras svoris: 38 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 04/2016, krovimo vietos ilgis: 7 660 mm, krovinių skyriaus plotis: 2 354 mm, krovos erdvės aukštis: 1 460 mm, krovinio erdvės tūris: 26 m³, pakaba: oras, padangos dydis: 385/65 R22,5, spalva: pilkas, Gamybos metai: 2016, Įranga: ABS,

Gamybos metai: 2014, būklė: naudotas, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of manufacture 2014 Approx. 3,000 operating hours Incl. mobile deck 0/120 Screening of difficult-to-screen materials, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, biowaste, landfill remediation in 2 fractions - Drive: Type generator 50 kVA / Voltage 400/230 V / Frequency 50 Hz / Speed 1,500 rpm / Fuel tank capacity 250 liters / Diesel fuel - Feed hopper: Length 2,700 mm / Width 2,100 mm / Loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6,000 mm / Width 2,500 mm / Drive 3 x 4.0 kW with frequency converter / 180 mm pitch / Separation cut 0-80/120 mm - Feed conveyor FH: Length 3,000 mm / Width 1,200 mm / Drive 1 x 4.0 kW with frequency inverter / Angled design, incl. hopper for accepting discharge belt from pre-shredder / Belt type Chevron - Undersize collecting conveyor longitudinal FC: Length 5,600 mm / Width 1,200 mm / Drive 1 x 3.0 kW / Permanent magnet separation / Belt type Chevron 16 mm - Undersize collecting conveyor cross FC: Length 1,600 mm / Width 1,000 mm / Drive 1 x 3.0 kW / Belt type Chevron 16 mm - Mobile undersize discharge conveyor: Length 4,460 mm / Width 1,000 mm / Drive 1 x 4.0 kW / Can be extended for FE fraction / Belt type Chevron 16 mm - Oversize collecting conveyor FC: Length 5,300 mm / Width 1,200 mm / Drive 1 x 3.0 kW / Belt type Chevron 16 mm Godpfx Ajwhza Ush Hsiw - Mobile oversize discharge conveyor: Length 7,350 mm / Width 1,700 mm / Drive 1 x 5.5 kW / Can be extended for FE fraction / Discharge height 5,000 mm - Control cabinet: complete electric control via one PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 color touch panel / Radio remote control with color display for all travel and working functions - Mobility: Electric crawler undercarriage with rubber pads / Electro-hydraulic control of the movable parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13,600 x 3,000 x 3,100 mm (LxWxH) Weight approx. 21,000 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport, or assembly Errors in description and price excepted Dismantling, transport, and loading by us available as an option To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale is as is / where is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner; no guarantee Interim sale reserved No warranty is provided for used machines; sale is on an "as inspected" basis Photos and videos are examples only and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, įėjimo srovė: 16 A, Steaker, visiškai veikiantis ir funkcionuojantis su padavimo juosta. Kalbame angliškai, vokiškai ir buvusios Jugoslavijos kalbomis. Galimas kontaktas ir per WhatsApp. Gjdpfx Ahsyzw Ibo Heiw

Būklė: nepatikrintas (naudotas), Diedesheim HPI 12262 Drebomat Precision Turning Machine -KOM 1027- Offered here is a precision automatic lathe from Diedesheim. Technical data: Manufacturer: Diedesheim Model: HPI 12262 Weight: 2,800 kg Operating voltage/frequency: 380V 50Hz Control voltage: 220V Magnet voltage: 24V DC Rated current of the machine: 16A Line fuse: 50A Giedpfx Ajhg S U Ssh Hsw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Sandėlio numeris: 503657 Mašinos / įrenginio tipas: Karšto kanalo valdymo įrenginys Gamintojas: Günther Modelis: DPT 5 Gamybos metai: 2017 Jungties duomenys: Maitinimo įtampa: kiekvienai fazei 200–250 V AC, 50–60 Hz, tipiška žvaigždės jungtis Žvaigždės jungtis: Trifazis tinklas su nulinio laido naudojimu, 200–250 V tarp L ir N Trikampio jungtis: Trifazis tinklas be nulinio laido, 200–250 V tarp dviejų fazių Krovos jungtis: IOA kiekvienam kanalui (saugiklis 10A itin greitas – FF 10A) ir po 1 kanalą kiekvienai fazei su 16A (žiūrėti maksimalų fazės apkrovimą!). Fazės apkrovimas (5 kanalai kiekvienai fazei): maksimaliai 25A Apsaugos klasė: IP 20 Matmenys: (P x A x G) 468 mm x 142 mm x 345 mm Svoris: 13,0 kg Giodpfsxx Tmrox Ah Hsw Korpuso spalva: pilka / mėlyna (RAL 9018 / RAL 5015)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Hot Runner Control Unit Günther DPT 6 Stock no.: 503655 Machine/Device type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of manufacture: 2019 CONNECTION VOLTAGE Per phase 200-250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200-250 V between L and N Delta connection: 3-phase network without neutral conductor, 200-250 V between two phases LOAD CONNECTION 16A per channel (Fusing: 16 A super fast "FF 16A") Phase load: maximum 32 A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6 7.3 KW (1 x 32 A) LOAD TYPE Only resistive loads permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free NO contact (max. 230V/1 A, not fused) REDUCTION INPUT Connection for a potential-free NO contact MAINS CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION Load connection: 2 x 24-pin HAN-E socket connectors Thermo connection: 2 x 24-pin HAN-E pin connectors FUSES Load output fuse: FF 16A, 6.3 x 32mm, type Schurter SA Control fuse, slow-blow 2A 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, among others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 - 700°C / 0 - 999°F REDUCTION Adjustable from 0 - 200°C / 0 - 360°F BOOST Adjustable from 0 - 100°C / 0 - 180°F SAFETY SHUTDOWN Adjustable from 0 - 700°C / 0 - 999°F DATA RETENTION Power failure-proof, data retention minimum 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180mm x x mm Godjxx Ti Tepfx Ah Hsiw Approx. 16.0 kg ENCLOSURE COLOR Aluminium / blue / grey (RAL 9006 / RAL 5002)

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06742-H106-000-000, konvejerio juostos plotis: 800 mm, konvejerio juostos greitis: 1 400 mm/s, bendras plotis: 1 066 mm, galia: 3 kW (4,08 AG), ašių atstumas: 5 300 mm, statybos plotis: 1 066 mm, Ašių atstumas: 5 300 mm Diržo plotis: 800 mm Statybinis plotis: 1 066 mm Šoninių sienelių aukštis: 270 mm Transportavimo greitis: 1,4 m/s Diržo kokybė: EP 400/3 3:1,5 mm standartinė kokybė Profilis: stačios transportavimo juostos, PB 550 mm / PH 17 mm Pavaros tipas: būgninis variklis, Van der Graaf gamintojas Galia: 3,0 kW Variklio apsaugos klasė/efektyvumo klasė: IP 66 / ISO F Pagrindinis pavara: Ø 215 mm (būgninis variklis) Guminė danga: metalinis paviršius Grįžtamoji būgninė: Ø 190 mm, kupolo formos Guoliai: techninės priežiūros nereikalaujantis įtempimo guolis Ø50 mm Laikančiosios ritinėliai: Ø 63,5 mm su smūgius sugeriančiais žiedais Laikančiųjų ritinėlių tarpai: 600 mm Gjdpfx Aeyh Aqkoh Hsiw Laikančiųjų ritinėlių guoliai: nereikalaujantys priežiūros Grįžtamieji ritinėliai: 2 vnt. Ø 89 mm Šoninio vedimo ritinėliai: 2 vnt. Ø 50 mm, ilgis = 120 mm Įtempimo stotelė: M16 srieginis strypas Speciali konstrukcija: perdavimo piltuvas laisvam iškrovimui

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06742-H103-000-000, konvejerio juostos plotis: 1 600 mm, konvejerio juostos greitis: 1 700 mm/s, bendras plotis: 1 854 mm, galia: 2,2 kW (2,99 AG), ašių atstumas: 4 450 mm, statybos plotis: 1 854 mm, Axle distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Siderail height: 240 mm Conveying speed: 1.0 m/s Belt specification: EP 400/3 4:2.0 mm standard grade Profile: steep conveyor belt, PB 1290 mm / PH 17 mm Drive: drum motor, Van der Graaf brand Power: 2.2 kW Motor protection class/efficiency class: IP66 / ISO F Drive drum: Ø 160 mm (drum motor) Lagging: metallic surface Return drum: Ø 175 mm, crowned Bearing: maintenance-free tension bearing Ø50 mm Giedpsu T Ewwsfx Ah Hew Carrying rollers: Ø 63.5 mm Carrying roller spacing: 500 mm Carrying roller bearing: maintenance-free Return rollers: Ø 63.5 mm Side guide rollers: 2 units Ø 120 mm with deep groove ball bearings Tensioning station: threaded spindle M16

Būklė: naudotas, Hot runner control unit Günther DPT 10, 10-fold, 230 Volt Price: €1,850 Contact: Mr. Rainer Eckerle Gisdpfxsh Uucfj Ah Hjw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, sukimosi skersmuo virš skersinio stumduko: 520 mm, tekėjimo ilgis: 1 500 mm, tekėjimo skersmuo: 500 mm, veleno skylė: 110 mm, veleno greitis (maks.): 2 000 aps./min, greitas poslinkis X ašimi: 10 m/min, greitasis eiga Z ašyje: 10 m/min, strypo praėjimas: 110 mm, Įranga: dokumentacija / vadovas, CNC Lathe COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Torino (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial no. 8051), in good condition and fully operational. One-piece cast iron base with induction-hardened and hand-scraped prismatic guideways. High-quality Italian construction. Available for inspection and testing by appointment in Turin. Main technical data: - Max swing over bed: 520 mm - Max turning diameter: 260 mm - Max swing over cross slide: 285 mm - Distance between centers: 1,500 mm - Spindle bore: Ø 110 mm - Spindle nose: Cam Lock 8" (A2-8") Giodpfxjy A Typs Ah Hjw - Spindle speed: 0 – 2,000 rpm (infinitely variable) - Motor power: 12.5 kW (16.8 kW peak) - Rapid traverse X / Z: 10 / 10 m/min - Ground ball screws ISO 5 – backlash-free, preloaded - RAPID Original quick-change turret – 4 positions - CNC control: Z32 Delectron / COMEV - 15" color touch-screen display - ISO / conversational / teach-in programming - USB – network – remote diagnostics connectivity - 2 controlled axes: X – Z - CE compliant | Year: 2018 Machine available for viewing and testing by appointment.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Carnietch / Marel kaulų šalinimo įrenginys (Pinbone Remover) Gsdex H Td Ajpfx Ah Hsiw Modelis: 2612 2012 m. Vienos eilės, Labai gera būklė

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, stalčių skaičius: 26, garantijos trukmė: 12 mėnesiai, EXTENDABLE RACK FOR GLASS SHEET STORAGE M80-26 YEAR OF MANUFACTURE 2026 / BRAND NEW We are a manufacturer of extendable racks for the storage of glass sheets (crates with glass) or other panel materials (sheet metal, quartz sinter, polycarbonate, furniture panels). Our racks are developed and produced entirely in-house at our company in Poland. The materials we use for manufacturing our racks are sourced with certified durability and are subject to continuous quality control. Gsdpfxof S Hh Te Ah Hsiw The rack consists of extendable, slightly inclined drawers. The rack enables up to 75% storage space savings as all compartments are constructed parallel to each other, with only 10 millimeters gap between them. We offer rack versions in various sizes and load capacities. Upon consultation, we can also produce racks with custom specifications tailored to your individual requirements. The compartment inclination depends on the installation and can be to the left or right. We particularly recommend the rack for glassworks, stonemasonry, furniture workshops, and advertising studios wishing to utilize their space efficiently. The racks are delivered as kits for self-assembly. Assembly is very straightforward: with years of experience, we have developed a well-thought-out product. Assembly with the included manual poses no problem. Our technical department is always available for support. If you prefer, our technician can supervise installation on-site for a fee. TECHNICAL DATA: RACK M80-26 Application: for individual glass sheets 255 cm x 160 cm Maximum glass sheet size: 275 cm x 170 cm Number of compartments: 26 Width of glass support bar: 8 cm Length of glass support bar: 308 cm Material for supporting glass: Wooden panel 308 cm x 8 cm x 2.5 cm Construction height (A): 218 cm Construction width (B): 384 cm Construction depth (C): 317 cm Space required for proper operation: 23 m² Floor requirements: level/flat Number of bearings per compartment: 8 Front wheel: Ø160 / reinforced polyamide Rear wheel: steel wheel with bearing / rolled on profile Color: RAL 7040 (grey) Corrosion protection: steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Permissible total load: 23,400 kg Inclination of compartments: left or right, depending on installation Assembly time: 7 hours Personnel needed for assembly: 2 persons DOCUMENTS INCLUDED WITH RACK M80-26 - Operating instructions - Assembly instructions - Data plate - Warranty: 12 months The product is supplied fully ready for use. Our company delivers glass sheet storage racks within the EU and beyond.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, keliamoji galia: 2 800 kg, Dvigubų padėklų šakė Naudingosios apkrovos svorio centras: 600 ISO klasė: ISO klasė 3 = 2 500–4 999 kg Būklė: paruošta naudoti, visiškai veikianti Giedezi H Nnjpfx Ah Hew Techninė būklė: gera Aprašymas: Pagaminimo metai: 2018 ISO 3A (51 cm) Keltuvės talpa: 2800 kg Atidarimo diapazonas: 560–1960 mm Plotis: 1180 mm Šakių ilgis: 1150 mm ID OS1999

Būklė: labai geros būklės (naudotas), Professional granulator by the German brand Dreher – model S 26/26 GFS-SPEZIAL. The machine is designed for shredding plastics from injection molding or extrusion processes. Features a robust build, proven VEM 7.5 kW motor, and 400 V three-phase power supply. The granulator is equipped with a large feed hopper, easy service access, and a control cabinet with emergency stop. The installed low-speed three-phase motor provides high shredding power with stable operation. • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Output performance suitable for medium and large injection molding machines • German build quality Gisdpfxsvyumyo Ah How • Heavy-duty frame and knife assembly Condition: Very good, mechanics checked and ready for operation.

Būklė: naudotas, Staklė, obliavimo staklė „Krummen & Katz“ modelis 4/26. Gisdpfxjzkrulj Ah Hew

Būklė: naudotas, didžiausias leistinas svoris: 1 995 kg, bendras svoris: 2 600 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 03/2026, krovimo vietos ilgis: 2 760 mm, krovinių skyriaus plotis: 1 510 mm, krovos erdvės aukštis: 300 mm, bendras plotis: 1 569 mm, bendras aukštis: 642 mm,

Būklė: naudotas, didžiausias leistinas svoris: 2 217 kg, bendras svoris: 2 600 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 05/2025, krovimo vietos ilgis: 3 660 mm, krovinių skyriaus plotis: 1 750 mm, krovos erdvės aukštis: 350 mm, bendras plotis: 1 810 mm, bendras aukštis: 930 mm,

Būklė: naudotas, „Maggi BS 35 2/26“ – daugiagalandė gręžtuvo staklė. Giodpfx Ahjzkh Rco Hjw

Būklė: naudotas, Medienos juostinis pjūklas 1/26 Giedpfx Aozkh N Soh How

Būklė: naudotas, Medienos pjovimo staklės 2/26 Gedezkh N Espfx Ah Hsiw

Būklė: naudotas, Smulkintuvas, medienos smulkintuvas 1/26 Gijdozkh Inspfx Ah Hjw