Scm Tw 45 C pirkti naudotą (61 696)

Būklė: naujas, Gamybos metai: 2023, Apskrito medžio žievės nuėmiklis CAMBIO 45 AIR TEN. CAMBIO 35. VK-450. Žievės nuėmiklis bus parduodamas po kapitalinio remonto. Žievės nuėmiklis bus aprūpintas naujos kartos peiliais. Įrenginį galima parduoti kaip žievės nuėmimo linijos dalį, kurią sudaro: 1. Stalas nežievintiems rąstams 2. Hidraulinis rąstų skaldytuvas 3. Padvaisinis konvejeris Fodpfeiqi S Nox Af Aepg 4. Grandiklis žievės konvejeriui 5. Išeinantis konvejeris su rąstų dėže kairėje pusėje 6. Kišenė žievintiems rąstams Visa įranga yra nauja

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Fedpfx Afsvb Hanj Ajpg Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A Fpjdpfx Aovb E Uqef Aog - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser The KKM 110/45 is part of the TKM/KKM modular series from RS Simulators – a modular climatic chamber that is assembled on-site. This modular system offers: - Modularity: Individual segments are pre-assembled and set up at the customer's site. This design allows for retrofitting (increased depth or additional modules) and easy relocation at a later stage. Technical specifications Climatic chamber: Manufacturer: RS Simulators Prüf- und Messtechnik GmbH Type: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H) including technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) on side wall: 1880 x 900 mm (H x W) Cable ports: 8 x Ø120 mm (4 left & 4 right) Windows: - 1x (460 x 550 mm) in front chamber door, heated - 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K according to DIN 50011 when test area is empty Humidity range: 10% to 95% Humidity tolerance: ± 5.0% Refrigerant: 2x R404A 52 kg, 2x R23 17 kg Temperature change rate: - Heating: 1.0 K/min - Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information: The following work is carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Fpsdpfxjwwg Uvj Af Ajg Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Here we offer a temperature test chamber. Fpedpfx Afjygunho Aog Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) We are happy to answer any further questions by phone.

Būklė: geras (naudotas), Flat gear motor, geared motor, electric motor, electric geared motor, flat geared motor, flat gear motor Fpsdpfjt Hy Thsx Af Aeg -Manufacturer: KEB, flat geared motor -Type: F 4.2 C DK 100 LX 4 W TW i= 11.38 -Speed: 50 rpm -Motor: Type SK 100 L/40 -Power: 3.0 kW / 1410 rpm -Hollow shaft: Ø 40 x 150 mm -Protection class: IP56 -Dimensions: 445/230/H360 mm -Weight: 60 kg

Būklė: naujas, Gamybos metai: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, cast-iron milling unit mounted directly to the table Under-table extraction hood for improved dust extraction Solid and precise cast iron table Fast and straightforward speed change Powerful 5.0 kW motor Standard curved milling guard Quality made in Italy Equipment Details Cast iron milling unit Directly mounted onto the milling table Milling spindle mounted with high-precision ball bearings in the upper position for minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful Motors Equipped with a high-performance three-phase motor Milling Guard The standard milling guard is supplied as standard for maximum safety, featuring a height-adjustable fence and protective cover. Milling Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw The integrated extraction port ensures an unobstructed view Milling Table Opening A large table opening allows the use of larger panel cutters, tenoning, and slotting tools above and below the table Curved Milling Guard Included as standard Reversible Fence Jaws Versatile, integrated fence to bridge the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and Weight Weight (net) approx. 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation Information Required length: 1,945 mm Machine body width/depth: 575 mm Required width/depth: 920 mm Working area length: 1,600 mm Explanation required space: The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Explanation working area: Please add the specified dimensions to the required space to calculate the recommended free setup area for the machine. Electrical Data Supply voltage: 400 V Drive motor power: 5.0 kW Mains frequency: 50 Hz Milling Spindle Usable spindle length: 100 mm Spindle speeds: 3,500/7,000/10,000 rpm Max. spindle protrusion above table: 130 mm Spindle shaft diameter: 30 mm Fedpfx Afohp Rcrj Ajpg Max. milling tool diameter Max. sinkable tool diameter: 180 mm SCOPE OF DELIVERY Curved milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Būklė: naudotas, Ferwood Code: RU0001071 - Condition: Used - Compatible Machine: CNC SCM - If interested, we offer refurbishment services; please contact us. Fpsdsu U D Ahepfx Af Aeg

Būklė: reikia remonto (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: AA2/002546, įrankių magazino lizdų skaičius: 24, bendras svoris: 6 600 kg, stalo ilgis: 5 200 mm, stalo plotis: 1 300 mm, TECHNINĖ INFORMACIJA Stalo ilgis: 5 200 mm Stalo plotis: 1 300 mm Frezuočių velenų kiekis: 1 Frezuojamojo stalo tipas: Sijos stalas Įrankių keitiklio pozicijos: 24 ĮRANGOS DUOMENYS Įtampa: 400 V Srovės suvartojimas: 64 A Matmenys ir svoris Matmenys (I x P x A): 10 300 x 2 450 x 2 800 mm Tuščias svoris: 6 600 kg Transportavimo pakuotės: 1 KOMPLEKTACIJA Gręžimo įrankis Vakuuminis siurblys Įrankiai Becker Vtlf 250 vakuuminis siurblys: - Gamybos metai: 2008 - Pagrindinio variklio galia: 5,5 kW - Jungties diametras: 70 mm - Be alyvos: Taip Fpjdpfx Ajy Nybtjf Ajg Pastaba: Įrenginiui reikalingas remontas. Yra problema su CAN-Bus sistema.

Būklė: naudotas, Gamybos metai: 2001, Tipas: Record 121 Darbo ašių skaičius: 3+ Naudinga darbo sritis X-Y-Z ašyse: 2600-1080-250 mm Stalo matmenys: 2600 x 1080 mm Veleno apsukų diapazonas: 900 - 18 000 aps./min. Frezuojančių velenų skaičius: 1 Įrankių keitimo pozicijų skaičius: 12 Įrankių tvirtinimo sistema: HSK63F Darbinis stalas: matricinis stalas Pagrindinis variklis: 7,5 kW Vakuuminio siurblio našumas: 250/300 m³/h Vakuuminio variklio galia: 6,5 kW Ištraukimo jungties skersmuo: 150 mm Suslėgto oro slėgis: 7 bar Įtampa: 380V/50HZ Transporto matmenys: 3700 x 3200 x 2600 mm Svoris: 3500 kg Fodpfx Asv Dtibef Aopg Kaina: 15 500 Eur

Būklė: labai geros būklės (naudotas), Katalogo numeris 7790 TECHNINIAI DUOMENYS - Maksimali apdirbamos detalės plotis: 1100 mm - Maksimali apdirbamos detalės aukštis: 170 mm - 2 agregatai: - Guminis spaudimo volas 1) Metalo grioveliuotas kalibravimo volas Fpodpfxey Rrzno Af Ajg - Guminis spaudimo volas 2) Guminis grioveliuotas volas + batelis + metalo volas - Guminis spaudimo volas - Pirmojo ir antrojo agregato variklio galia: 11 kW Iš apačios: - 3 metaliniai slydimo volai - Padavimo juosta - 2 metaliniai slydimo volai - Pneumatinė juostos osciliacija - Elektrinis + rankinis stalo pakėlimas (tiksliam reguliavimui) - 2 padavimo greičiai - Su pneumatiniais stabdžiais - Darbinis slėgis: 8 bar - Ištraukimo antgalio diametras: 2x160 mm, 4x100 mm - Bendri matmenys (ilgis/plotis/aukštis): 2000x1600x2100 mm - Svoris: 1170 kg PRIVALUMAI – Nedažyta – Pagaminta Italijoje – 2 agregatai – DTR techninė dokumentacija – Naudotas šlifuoklis, labai geros būklės Grynasis kaina: 36 900 PLN Grynasis kaina: 8 790 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Būklė: labai geros būklės (naudotas), Catalog number: 6368 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) Lower horizontal 230 mm, 5.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW Fpjdpfey N Agxsx Af Aog 4) Upper horizontal 230 mm, 7.5 kW 5) Upper horizontal 230 mm, 11 kW 6) Lower horizontal 230 mm, 18.5 kW 7) Universal 230 mm, adjustable 360 degrees, 5.5 kW - All spindles adjustable up/down and left/right - All spindles equipped with electric brake - Spindle diameter: 40 mm - Spindles 4 and 5 adjustable electrically up/down - Top: 8 driven metal feed rollers, swiveling, including 2 double rollers - Top: 4 driven rubber outfeed rollers - Top: 2 pressure units - Bottom: pawls - Bottom side: 3 pressure units - Bottom: 2 smooth metal driven rollers - Bottom: 2 double driven rubber rollers - Feed rollers pneumatically pressed - Feed on Cardan shafts - Stepless feed speed adjustment: 5–36 m/min - Feed motor: 4 kW - Electric thickness adjustment: 0.75 kW - Infeed table length: 1980 mm - Fully enclosed machine compartment - Central table lubrication - Extraction port diameters: 5x120 mm, 2x150 mm - Dimensions (LxWxH): 5500x1840x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian manufacture – Equipped with 7 heads – Suitable for wet and dry wood – Last spindle universal – Not repainted – Used planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR (based on 4.2 EUR exchange rate) (Prices may vary depending on exchange rate fluctuations)

Būklė: geras (naudotas), Foellmer 45 ME bigavimo įrenginys Įrenginys yra labai geros techninės ir vizualinės būklės. Nuo naujo vienas savininkas. Tai naujausias modelis, šiuo metu vis dar gaminamas. Darbinis plotis – 450 mm. Fjdpfx Ajy Nzlaof Aspg Maitinimas – 380V. Įrangoje yra bigavimo strypas, priekinis ir šoninis užtvarai. Šis bigavimo įrenginys rekomenduojamas didesniems tiražams. Dėl krumplinio variklio veikimo yra tylus ir galingas. Valdymas pėdos pedalu.

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, šlifavimo plotis: 950 mm, šlifavimo aukštis: 170 mm, aukščio reguliavimo tipas: elektrinis, įvesties srovės tipas: trifazis, - Italų gamyba - Gamybos metai: 2007 - Kombinuota šlifavimo trinkelė TECHNINIAI PARAMETRAI: - Šlifavimo plotis: 950 mm - Šlifavimo aukštis: 4-170 mm - Variklio galia: 11 kW - 1 agregatas: plieninis velenas su pneumatiniu prispaudimu - Veleno skersmuo: 110 mm - 2 agregatas: kombinuota šlifavimo trinkelė - Pneumatinis gumos veleno prispaudimas: 78 Shor'ų - Trinkelė su pneumatiniu prispaudimu - Pneumatinė osciliacija - Oro pūtimas ant juostų - Elektrinis aukščio reguliavimas - Dvi juostos greičiai: 8,3 m/s ir 16 m/s - Elektroninis šlifavimo aukščio nustatymas - Nuolatos reguliuojamas padavimo greitis: nuo 4 iki 20 m/min - Minimalus medžiagos ilgis: 500 mm - Movų skersmuo: 2 x 140 mm - Staklių matmenys (ilgis/plotis/aukštis): 150 x 180 x 210 cm - Svoris: ~ 1010 kg Fpsdpoxdxfqofx Af Aog

Būklė: naujas, Parduodamas naujas, nenaudotas pramoninis siurblys KSB Etachrom B – pilnas komplektas, originalioje pakuotėje, su gamintojo dokumentacija. Siurblys skirtas pramoniniam ir procesiniam naudojimui – aukšta vokiška kokybė, pagaminta Vokietijoje. Techniniai duomenys (pagal vardinę lentelę): Gamintojas: KSB Fpodsyhhqxjpfx Af Aeg Serija / tipas: Etachrom B Našumas (Q): 18,0 m³/h Pakėlimo aukštis (H): 45,0 m Sparnuotės diametras: Ø 181 mm Sūkių dažnis: 2904 aps./min Darbinis slėgis: PN10 Terpės klampumas: 1,0 mm²/s Gamybos metai: 2023 Pagaminta: Vokietija Žymėjimai: CE, EAC, UKCA Būklė Naujas – sandėliuotas Niekada nebuvo paleistas Originali dėžė Instrukcijos/ sumontavimo vadovas pridedamas Būklė kaip nuotraukose Pritaikymas pramoniniai įrenginiai procesų sistemos aušinimas, technologinis vanduo techninės ir gamybinės instaliacijos

Būklė: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 360 mm, pjovimo plotis (maks.): 580 mm, Įranga: CE žymėjimas, dokumentacija / vadovas, – CE sertifikatas – Naudojimo instrukcija – Pagaminta Italijoje Fjdpfx Afjy El U Dj Aspg – Gamybos metai: 2006 TECHNINIAI PARAMETRAI: – Vedančiųjų ratų skersmuo: Ø 600 mm – Pjovimo aukštis: maks. 360 mm – Pjovimo plotis: maks. 580 mm – Stalo matmenys (ilg. / plot.): 800 x 585 mm – Pjūklo stalo nuolydis: 0° - 20° – Minimalus juostos/pjūklo ilgis: 4480 mm – Minimalus juostos/pjūklo plotis: 10 mm – Maksimalus juostos/pjūklo ilgis: 4580 mm – Maksimalus juostos/pjūklo plotis: 35 mm – Smagračio greitis: 715 aps./min – Variklio galia: 2,2 KW / 400 V / 50 Hz – Ištraukimo antgalio skersmuo: 100 mm – Įrenginio matmenys (ilg./plot./aukšt.): 1120 / 800 / 2200 mm – Svoris: ~300 kg

Būklė: naudotas, mašinos/transporto priemonės numeris: 008288, Pozicija 1: Pakrovėjas SCM-MAHROS - STEFANI - CELASCHI Pozicija 2: Dvipusė briaunų klijavimo staklės SCM-MAHROS - STEFANI - CELASCHI Pozicija 3: Plokščių verstuvas SCM-MAHROS - STEFANI - CELASCHI Pozicija 4: Dvipusė briaunų klijavimo staklės SCM-MAHROS - STEFANI - CELASCHI Pozicija 5: Plokščių verstuvas SCM-MAHROS - STEFANI - CELASCHI Fsdpfsx Nv S Uex Af Aspg Pozicija 6: Vidurio pjūvio pjūklas SCM-MAHROS - STEFANI - CELASCHI Pozicija 7: Iškroviklis SCM-MAHROS - STEFANI - CELASCHI

Būklė: labai geros būklės (naudotas), Catalog number: 7713 TECHNICAL DATA - Maximum workpiece width: 240 mm - Maximum workpiece height: 130 mm - 6 spindles: 1) Lower horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 240 mm, 7.5 kW 5) Upper horizontal 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Lower horizontal 240 mm, 5.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 8 steel feed-in rollers, toothed, including 3 double rollers - 4 smooth rubber feed-out rollers, including 2 double rollers From below: - 3 smooth feed rollers - 3 lateral pressure rollers - Variable feed speed control via inverter - Pneumatic roller pressure - Feed motor: 7.5 kW - Feed via Cardan shafts - Electric thickness adjustment - Body raising motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic opening/closing of safety hood - Pneumatic table air blower - Central table lubrication - Extraction port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5300 x 1700 x 1800 mm - Weight: 5000 kg ADVANTAGES Fpedpfsy Aaiwjx Af Aeg – Italian-made – 6-head construction – Suitable for wet and dry wood – Pneumatic hood opening – Pneumatic table air blower – 4th and 5th spindle electrically adjustable – Used planer, very good condition Net price: 126,900 PLN Net price: 30,200 EUR (based on 4.2 EUR/PLN) (Prices may vary subject to exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), CATALOG NO. 7967 Fsdpfxjy Ddp Dj Af Ajpg TECHNICAL DATA - Max. working width: 1100 mm - Max. working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top configuration: - Rubber feed roller, sliding - Unit (two units driven by one 15 kW motor) - Rubber feed roller, sliding - Rubber outfeed roller - Belt air cleaning – Bottom configuration: - 2 sliding metal rollers - Feed belt - 2 sliding rubber rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electrically adjustable table lift + manual fine adjustment - Pneumatic brake - 2 feed speeds - Working pressure: 6-8 bar - Extraction port diameter: 2x140 mm - Overall dimensions (LxWxH): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian-made – 2 sanding units – Original paint (not repainted) – Used sander, in excellent condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may change in case of significant fluctuations)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 45 mm, bendras aukštis: 1 650 mm, bendras ilgis: 2 800 mm, bendras plotis: 1 220 mm, bendras svoris: 660 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Kantavimo staklės, naudotos po techninės apžiūros. - Pagaminta Italijoje - Nedažyta - Labai gera būklė - Naudotos kantavimo staklės Techniniai parametrai Įranga: - Lėkštė - Klijų bakelis (granuliuotas) - Giljotina – išankstinis briaunos pjovimas - Galutinis briaunos pjovimas pjūklu - 2 frezavimo agregatai briaunos viršui/apačiai - 2 ciklinės – klijų pertekliui pašalinti - 2 poliravimo agregatai - Didžiausias ruošinio storis – 45 mm - Mažiausias ruošinio plotis – 50 mm - Mažiausias ruošinio ilgis – 150 mm - Nusiurbimo angos skersmuo – 60 mm - Suspausto oro slėgis – 6 barai Bendri matmenys: - Ilgis 2800 mm - Plotis 1220 mm - Aukštis 1650 mm Fpsdpfx Afey Iv R Uj Asg - Svoris 660 kg Kur galite apžiūrėti mūsų įrenginius? JBS MEDIENOS APDIRBIMO TECHNIKA WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKOJE APSKRITIS

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Bottom, right, left, top, universal Fodpfjy N Rb Rox Af Aepg Motor power: 4 kW, 5.5 kW, 4 kW, universal 4 kW Spindle speed: 6000 rpm Table lubrication Electric height adjustment (up/down) Two feed speeds Year: 1999 Weight: 2320 kg 400 V

Būklė: naujas, Worktable dimensions: 2500 x 780 mm Spindle diameter: 30 mm Spindle swivel range: +/- 45.50° Spindle clamping length: 140 mm Max. tool diameter under table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Motor power (electro spindle): 7.50 kW Electro spindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with “Easy Touch 7” electronic control “Flex” milling fence with automatic setting via electronic control Right- / left-hand spindle rotation Extendable front table support INCLUDES OPTIONS: - “Fast” table insert with automatic adjustment via “Easy” control - “LL” version with 2 cast iron table extensions up to 2500 mm Notice for used machines: • Technical details are subject to error and prior sale. • Prices quoted are ex works – loading included! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claim. Fedpfxod Etkhj Af Aepg Buyers are free to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will be answered only with your address and telephone number!)

Būklė: naujas, Adjustment of the infeed worktable via parallelogram system Chip removal indication using degree scale Fpsdpjd Akyzjfx Af Asg Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device Quick-change system for switching between surfacing and thicknessing operations (CE version) featuring a special support for opening the surfacing tables and an automatic pneumatic positioning system for the extraction hood, hydraulically assisted "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic and automatic modes with 99 storable working programs – Additional features: calculator and operating hours counter Automatic star-delta start for main motor Machine table height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Replaceable feed rollers Segmented pressure shoes at infeed Planer cutterblock and setting gauge for planer knives Micro safety switches for correct positioning of the surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE declaration of conformity Technical Data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutterblock diameter [mm]: 120 Motor power [kW]: 9.0, 50 Hz, 400 V Cutterblock speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminum surfacing fence [mm]: 1200 x 190 Surfacing fence tilting range: from 90° to -45° Min./max. Planing height [mm]: 3 / 250 Thicknessing feed speed [m/min]: 5-8-12-18 Extraction hood diameter for surfacing [mm]: 120 Extraction hood diameter for thicknessing [mm]: 120 Including options: - "TERSA" cutterblock with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Būklė: naujas, Robust steel and grey cast iron construction High-precision format sliding table made of anodized aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade tiltable to 45° Large squaring frame (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Strongly ribbed cast iron surfacing tables, stress-relieved and annealed for decades of stability and flatness Helically toothed steel infeed roller for uniform material feed Three manually adjustable spindle speeds Spindle moulder with reversing (right/left rotation) Three independent industrial motors Fpedpfx Aoiiynnjf Aeg With lockable main switch, motor protection switch, emergency stop switch Surfacing table width: 410 mm Surfacing table length: 1810 mm Maximum planing depth: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum material removal: 4 mm Extraction port diameter: 4 x 120 mm Cutterblock type: TERSA (3 pcs) Cutterblock diameter: 72 mm Speed: 5200 rpm Panel saw crosscutting length: 2250 mm Cutting width with parallel fence: 900 mm Max. crosscut width left of saw blade: 2310 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 90 mm Max. cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and worktable Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter, retractable/non-retractable: 180/210 mm Main drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg INCLUDES OPTIONS - Handwheel with gravity numerical display for thickness table positioning - Sliding table length 2600 mm - Professional fences/stops - 'TERSA' cutterblock - Spindle moulder with reversing (right/left rotation)

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Fpodpfx Aexqggcsf Aog Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)