Sahinler Mk13 1215 pirkti naudotą (162)

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2,550 mm Max. bending capacity - mild steel: 25 mm Max. sheet thickness without pre-bending at D = 5x top roll: 25 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 16 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,500 mm Width: 2,000 mm Height: 1,900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment for bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Nodpfoynm Euox An Isct Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Njdpsynm Enofx An Ijct Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Nedeynm Ehopfx An Ijct Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Nedoynm Ebopfx An Ijct Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Ncedpfjynm D Rjx An Iet Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Nodpfoynmzpjx An Isct Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Nodsynmylopfx An Iect Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Nedpfoynmyfjx An Iect Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Njdpfxsynmx Io An Ijct Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €34,200 Leasing rate: €653.22 Shaft diameter: 100 mm Roller diameter: 315 mm Driven rollers: 3 Motor power: 7.5 kW Speed: 7 m/min Flat bar upright (section / min. diameter): 100x20 mm / 800 mm; 30x10 mm Flat bar flat (section / min. diameter): 200x30 mm / 1,200 mm; 160 mm Square steel (section / min. diameter): 60x60 mm / 750 mm; 15x15 mm Round steel (section / min. diameter): Ø 75 mm / 800 mm; Ø 15 mm Tube (section / min. diameter): Ø 125x2.5 mm / 1,400 mm Rectangular tube upright (section / min. diameter): 100x40x4 mm / 1,300 mm; 20x20 mm Rectangular tube square (section / min. diameter): 80x80x5 mm / 1,500 mm; 25x25 mm Angle iron, leg outside (section / min. diameter): 100x100x12 mm / 1,000 mm Angle iron, leg inside (section / min. diameter): 100x100x10 mm / 1,000 mm UPN, leg outside (section / min. diameter): UPN 180 / 900 mm; UPN 30 UPN, leg inside (section / min. diameter): UPN 180 / 1,000 mm; UPN 30 IPN flat (section / min. diameter): IPN 180 / 1,000 mm; IPN 80 Length: 1,465 mm Width: 2,000 mm Height: 1,700 mm Ncjdpfx Aneynmrzs Ijt Weight: 4,000 kg 3 hydraulically driven rollers Robust welded steel construction Hydraulic adjustment of the two lower rollers Digital display of the lower roller positions on a separate control panel Side straightening rolls adjustable in 3 axes Usable horizontally and vertically Forward and reverse drive Machine and equipment in accordance with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of Origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roll diameter: 390 mm Driven rolls: 3 Motor power: 15 kW Njdpfx Anoynmrue Ijct Speed: 2/7.5 m/min Flat bar on edge (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x... Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100... Square steel (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20... Round steel (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm... Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube vertical (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3... Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30... Angle steel – outside leg (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; ... Angle steel – inside leg (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; ... UPN – outside leg (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN – inside leg (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg 3 driven rolls (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rolls Hardened universal rolls Side guide rolls adjustable hydraulically in 3 axes 2 speeds Usable horizontal and vertical Mobile control panel Digital display (3 axes) Machine and equipment comply with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, We are offering a new showroom machine from the manufacturer Sahinler for sale. Motorized circular shear with hydraulic clamping Technical specifications: - Max. diameter: 1200 mm - Minimum diameter: 220 mm Nedpfx Aova Acven Ijct - Max. sheet thickness (ST 42): 3.5 mm - Max. sheet thickness (stainless steel): 3.0 mm - Cutting speed: 6.1 m/min - Motor power: 2.2 kW - Weight: 750 kg - Dimensions (LxWxH): 2000x600x1400 mm - Throat depth in sheet holder: 750 mm - Throat depth in shear: 250 mm - Blades made of special steel K 2379 - Hydraulic inner cutting system - Motorized centering system - Centralized lubrication

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 150 t, bendras svoris: 1 400 kg, Įranga: CE žymėjimas, Siūlome šią geros būklės Sahinler 1020-150 hidraulinę dirbtuvių presą, 150 t, pagaminimo metai 2012. - Uždarymo eigos reguliavimas su preciziniu nustatymu, - Reguliuojamas stalo aukštis - Automatinis slėgio išjungimas pasiekus nustatytą slėgį - Su atskiru dviem rankomis valdomu pultu, - Stalo plokštė su grioveliais tvirtinimo akmenims, Nsdpfeyzl Amox An Ijct - Presavimo plokštė su grioveliais, - 2 presavimo plokštės viršuje kreipiančiosios kolonos, Puikiai veikia. Mašiną galima pademonstruoti vietoje. Beveik nenaudota, naudota tik prototipų gamybai. Pirmas savininkas. Matmenys žiūrėkite duomenų lape. Mašiną galima pakrauti vietoje. Svoris apie 1,4 t. Naujos kaina apie 21 000 € be PVM. Jokia garantija ar atsakomybė neteikiama. Jei turite klausimų ar reikia daugiau informacijos, rašykite mums arba skambinkite.

Būklė: naujas, Gamybos metai: 2026, Condition: New Year of manufacture: 2026 Stock number: 090180 Delivery time: immediate, subject to prior sale Country of origin: Turkey Njdpfxewiqm Te An Ijct Price: €8,300 Leasing rate: €160.19 In stock: 1 Shaft diameter: 50 mm Top roller diameter: 152 mm Bottom roller diameter: 162 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 4.5 m/min Flat bar, upright (section / min. diameter): 60x10 mm / 600 mm; 20x10 Flat bar, flat (section / min. diameter): 100x15 mm / 600 mm; 50x Square steel (section / min. diameter): 35x35 mm / 600 mm; 15x15 Round steel (section / min. diameter): 35 mm / 600 mm; Ø 20 mm Pipe (section / min. diameter): 70x2 mm / 1200 mm; Ø 25 mm Rectangular tube, upright (section / min. diameter): 70x30x3 mm / 1500 mm; 30x Square tube (section / min. diameter): 50x50x3 mm / 1600 mm; 20x Angle iron, leg outside (section / min. diameter): 50x50x6 mm / 600 mm; 30x3 Angle iron, leg inside (section / min. diameter): 50x50x6 mm / 900 mm; 30x3 Length: 810 mm Width: 950 mm Height: 1500 mm Weight: 500 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of top roller Hardened universal rollers Lateral guide rollers adjustable on one axis manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment in compliance with CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Nedpfsd Eqqqex An Ijct Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Techniniai duomenys Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR

Būklė: naujas, Slėgis: 150 t Eigos ilgis: 300 mm Atstumas tarp stovų: 1570 mm Darbo greitis: 5 mm/s Grįžimo greitis: 10 mm/s Njdpfx Anjd Ab Ndj Ijct Dirbtuvių presas: Suvirinta plieninė konstrukcija Bet kokia sustojimo padėtis Slėgio indikatorius Apsauginis vožtuvas nuo perkrovos 2 V formos prizmės Reguliuojamas darbo stalo aukštis Stalo pakėlimo/nuleidimo mechanizmas Valdymas svertimi Įranga pagal CE reikalavimus Naudojimo instrukcija VOKIEČIŲ kalba (Simbolinė nuotrauka) Presavimo jėga: 150 t Variklio galia: 11 kW Eigos ilgis: 300 mm Laisvas atstumas tarp stovų: 1.570 mm Stūmoklio Ø: 280 x 200 mm Padavimo greitis: 9 mm/s Darbo greitis: 5 mm/s Grįžimo greitis: 10 mm/s Ilgis: 2.500 mm Plotis: 1.000 mm Aukštis: 2.270 mm Svoris: 2.100 kg

Būklė: naujas, Techniniai duomenys: Presavimo jėga: 60 t Variklio galia: 4 kW Eiga: 250 mm Atvirų rėmų plotis: 1.040 mm Stūmoklio Ø: 180 x 120 mm Pristūmimo greitis: 8 mm/s Darbinis greitis: 4 mm/s Atitraukimo greitis: 10 mm/s Ilgis: 1.710 mm Plotis: 700 mm Aukštis: 2.100 mm Svoris: 800 kg Įranga: Ncjdpfxsd Ab Iqo An Ijt Plieninė suvirinta konstrukcija Bet kurioje padėtyje galima sustabdyti Slėgio indikatorius Apsauginis vožtuvas nuo perkrovos 2 V formos prizmės Aukščio reguliuojamas stalas Stalo pakėlimo-nuleidimo įtaisas Valdymas rankena Rankiniu būdu valdomas cilindro judėjimas į dešinę ir į kairę Įranga pagal CE reikalavimus Eksploatavimo instrukcija vokiečių ir anglų kalbomis

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 25498, apatinio volelio skersmuo: 320 mm, viršutinio volo skersmuo: 320 mm, šoninio volelio skersmuo: 260 mm, darbinis plotis: 2 070 mm, maks. lakšto storis: 25 mm, TECHNINĖS DETALĖS Lakšto plotis: 2.070 mm Lakšto storis: 25 mm Lenkimo aukštis: 18 mm Viršutinio volo skersmuo: 320 mm Šoninių volų skersmuo: 260 mm Apatinio volo skersmuo: 320 mm STAKLIŲ DETALĖS Bendras galios poreikis: 26 kW Matmenys ir svoris Užimama erdvė: apie 4.700 x 2.000 x 2.200 mm Nodpfx Ansygw Ikj Ijct Staklių svoris: apie 8.100 kg ĮRANGA hidraulinis šoninių volų pritraukimas kūginio lenkimo įrenginys 2 varomieji volai grūdinti volai hidraulinis atverčiamas guolis judanti valdymo pultas kojinis jungiklis saugos įranga CE ženklas

Būklė: naujas, Gamybos metai: 2025, Condition: new Year of manufacture: 2025 Stock number: 090131 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €4,700 Leasing rate: €109.71 In stock: 1 unit Shaft diameter: 50 mm Roller diameter: 155 mm Driven rollers: 2 Motor power: 1.5 kW Speed: 4.5 m/min Flat bar vertical (section / min. diameter): 60x10 mm / 500 mm; 40x10 mm Flat bar horizontal (section / min. diameter): 100x15 mm / 450 mm; 60x... Square bar (section / min. diameter): 35x35 mm / 900 mm; 20x20 mm Ncsdowiq S Ajpfx An Iot Round bar (section / min. diameter): Ø 35 mm / 600 mm; Ø 30 mm Tube (section / min. diameter): Ø 70x2 mm / 1,000 mm; Ø 30 mm Rectangular tube vertical (section / min. diameter): 70x30x2 mm / 1,200 mm; 50x... Rectangular tube square (section / min. diameter): 50x50x3 mm / 1,700 mm; 40x... Angle iron leg outside (section / min. diameter): 50x50x5 mm / 800 mm; 40x4 mm Angle iron leg inside (section / min. diameter): 50x50x6 mm / 1,000 mm; 30x... Length: 1050 mm Width: 750 mm Height: 1450 mm Weight: 390 kg 2 mechanically driven rollers Robust cast steel construction Shafts made of hardened and ground special steel Manual adjustment of the top roller Hardened universal rollers Side guide rollers adjustable on one axis manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment conform to CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €20,400 Leasing rate: €391.68 Shaft diameter: 80 mm Roller diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min Flat bar upright (section / min. diameter): 100x20 mm / 2000 mm; 80x20 mm Flat bar flat (section / min. diameter): 125x25 mm / 600 mm; 60x5 mm Square steel (section / min. diameter): 45x45 mm / 500 mm; 15x15 mm Round steel (section / min. diameter): Ø 50 mm / 500 mm; Ø 15 mm Pipe (section / min. diameter): Ø 100x2.5 mm / 1,200 mm Rectangular tube upright (section / min. diameter): 80x25x3 mm / 800 mm; 25x1 mm Square tube (section / min. diameter): 70x70x3 mm / 1,300 mm; 25x25x2 mm Angle iron, leg outward (section / min. diameter): 80x80x8 mm / 800 mm; 30x3 mm Angle iron, leg inward (section / min. diameter): 70x70x7 mm / 700 mm; 30x3 mm UPN, leg outward (section / min. diameter): UPN 140 / 1,600 mm; UPN 120 UPN, leg inward (section / min. diameter): UPN 140 / 1,600 mm; UPN 120 Nedpfewirvvox An Iect IPN lying flat (section / min. diameter): IPN 120 / 600 mm; IPN 80 Length: 1,450 mm Width: 1,000 mm Height: 1,400 mm Weight: 1,700 kg 3 motor-driven rollers Robust steel welded construction Hydraulic adjustment of both lower rollers Digital display of lower roller positions on a separate control console Side straightening rollers adjustable along 3 axes Can be used horizontally and vertically Forward and reverse operation Machine and equipment compliant with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Pressure: 100 t Stroke: 300 mm Ram area: 600 x 900 mm Table area: 700 x 1100 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 8.5 mm/s Return speed: 165 mm/s Motor: 11 kW Ncedpfx Anod Ab Ihj Ist Includes light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating quadruple ram guides Clamping plate with T-slots Manufactured according to CE regulations Press force: 100 tons Pressure: 240 bar Table: 1100 x 700 mm Ram dimensions: 900 x 600 mm Table bore: 120 mm Stroke: 300 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 8.5 mm/s Return speed: 165 mm/s Motor: 11 kW Length: 2,180 mm Width: 1,600 mm Height: 3,150 mm Weight: 6,500 kg

Būklė: naujas, Pipe diameter: 10–114 mm Nodpfxsd Ab U Ds An Ioct Belt dimensions: (2x) 50 x 940 mm Belt speed: 3–22 m/s Details: Technical Data: - Working capacity Ø: 10–114 mm - Number of grinding heads: 2 - Grinding belt speed: 3–22 m/s - Belt dimensions: (2x) 50 x 940 mm - Motor power: 5 kW - Weight: 265 kg - Perfect choice for grinding and polishing - Ideal for round and oval tubes - Foot-pedal band release facilitates easy insertion and removal of the tube - Equipped with 2 continuously rotating triangular grinders - Machine and equipment conform to CE standards - Operating manual available in GERMAN and ENGLISH

Būklė: naujas, Drawing cushion stroke: 200 mm Installation height: 600 mm Pressure: 60 bar Stroke: 350 mm Light barriers Manual and automatic operation Manual stroke adjustment via cam switch Maintenance-free, self-lubricating quadruple ram guides Clamping plate with T-slots Design compliant with CE regulations (Stock photo) Pressing force: 60 tons Nsdpfx Aed Ab Iijn Isct Pressure: 170 bar Table: 1,000 x 600 mm Ram dimensions: 850 x 550 mm Table bore: 100 mm Stroke: 350 mm Installation height: 600 mm Rapid traverse: 100 mm/s Working speed: 10 mm/s Return speed: 165 mm/s Motor: 11 kW Drawing cushion: Pressing force 24 tons; stroke 150 mm; pressure 156 bar; return speed 65 mm/s Dimensions: 300 x 300 mm Length: 1,670 mm Width: 1,520 mm Height: 3,000 mm Weight: 7,000 kg

Būklė: naujas, Shaft diameter: 315 Working speed: 7 Motor power: 7.5 Length: 2000 Width: 1450 Height: 1700 Approx. weight: 3650 Technical specifications: - Welded steel frame construction - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working positions - Standard hardened rollers - Mobile control panel Nedpfx Aneh Alics Ijct - Lateral guide rollers with angle adjustment - Equipped with brake motor for precision bending - Digital readouts (2 units) Options: - STANDARD digital display - NC unit 7 Screen EURO 9,000,--

Būklė: naujas, Pressure: 22 Stroke: 200 Table size: 625 x 1,100 mm Total power requirement: 2.2 kW Weight approx.: 0.635 t Dimensions (LxWxH): 1,100 x 0,630 x 0,925 m Feed rate: 1,750 mm/min Working speed: 450 mm/min Return speed: 2,000 mm/min Distance between locating pins min/max: 110 / 310 mm Pin diameter fixed/movable: 55 mm Locating pin height: 120 mm Oil tank: 45 l • Cylinder located underneath • Stroke adjustment possible under pressure • Two-hand operation and foot pedal • Centralized lubrication system Tools available on request See catalogue at the following link: Ncodpfxsd Ab Ibe An Iet