Ona Irist10 pirkti naudotą (15 667)

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Itedpefz U Nuefx Abvog Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box Ijdofz U Rcopfx Abvetg • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg Itodpjfz Dknjfx Abvog • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel Itsdpefz U Rrofx Abvjg • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol Iedpfofz U Sasx Abvstg • Programmable powder suction valve to keep the center powder-free

Gamybos metai: 2020, būklė: naujas, Pneumatic connection 1" • Controls the 7" color touch panel • Paint tank capacity 6–7 kg • Air consumption during coating: 15 Nm³/h • Air consumption for cleaning: 350 Nm³/h • Hopper pigment sensor: Yes • Ultrasonic screener: Yes Iedpfsfz U Swox Abvetg • Powder injectors: up to 12 units Description • RP-01 pump for refilling paint with fresh material from cardboard packaging • Two operating modes: paint recovery with mixing or total waste discharge • Sealed fluidizing paint container • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor • Automatic tray refill with paint from cardboard packaging • Paint level sensor in refill box • An acoustic alarm alerts the operator when there is low paint in the carton • The center is connected to the booth control via ModBus protocol • Programmable powder suction valve to keep the center powder-free

Būklė: labai geros būklės (naudotas), Parduodu profesionalų SUBITO – Schwenk ESU mikrometrinių matuoklių nustatymo įrenginį. Labai gera būklė, pilna komplektacija originalioje medinėje dėžėje su instrukcija. • Modelis: SUBITO Einstellgerät ESU • Gamintojas: Oskar Schwenk GmbH, Vokietija • Pilnas komplektas • Stabili ketaus bazė • Tiksli reguliacija ir mikrometrinis poslinkis • Puikiai tinka SUBITO, ESS, ESU mikrometrinių matuoklių nustatymui • Komplektas kaip naujas Itjdpfx Abex A Ia Isvog

Būklė: naudotas, veikimo valandos: 1 330 h, Įranga: visų varančiųjų ratų pavara,

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 125 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN22000321, bendras svoris: 50 kg, Fotona StarFormer® yra neinvazinis, didelio intensyvumo magnetinės stimuliacijos prietaisas (HITS™), skirtas neskausmingam raumenų stiprinimui, tonizavimui ir kūno formavimui. Jis naudoja magnetinius impulsus, kad sukeltų gilias raumenų susitraukimus, stiprinant sėdmenis, pilvą, rankas ir nugarą (TightWave®), arba dubens dugno raumenis, gydant šlapimo nelaikymą (IntimaWave®). StarFormer® PRO modelis yra kompleksinė sistema, siūlanti tiek TightWave®, tiek IntimaWave® programas, užtikrinanti universalius gydymo sprendimus moterų ir vyrų sveikatos klinikoms. Itjdpey I Tiuofx Abvjg

Būklė: naudotas, filtravimo plotas: 42 m², siurbimo galia: 1 750 m³/val, Skirta suvirinimui, šlifavimui, smėliavimui ir visų rūšių sausoms dulkėms. Filtras valomas pneumatiškai, suspausto oro impulsais darbo metu, todėl įrenginio efektyvumas yra didelis. Ventiliatoriaus galia 1,1 kW - vienfazis. Našumas 1750 m3/h. Didelis filtravimo plotas - 42 m2. HEPA filtras tikslesniam oro valymui. Mechaninis kibirkščių gaudyklė. Itedpfx Ajy Hhcasbvog Sandėlio numeris: 1118

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 9 058 h, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 1 100 kg, filtravimo plotas: 106 m², siurbimo galia: 7 000 m³/val, Dulkių ištraukėjas, suvirinimo dūmų ištraukėjas, savaime išsivalantis kasetinis filtras, pneumatinis, vakuuminis – skirtas naudoti su plazma, lazeriu, smėliavimu, sodos srove, šratavimu ir visų rūšių sausoms dulkėms. Filtras valomas suspausto oro impulsais darbo metu, todėl įrenginys pasižymi dideliu efektyvumu. Ventiliatorius įrengtas švarioje pusėje, kas sumažina sprogimo riziką iki minimumo. Markė: Donaldson Torit DCE Modelis: DFPRO 6 Pagaminimo metai: 2019 Darbo valandos: 9000 Filtravimo plotas: 106 m2 Ventiliatoriaus galia: 7,5 kW Našumas: 7000 m3/h Įleidimo skersmuo: 315 mm Itodpfxjydcygo Abvog Matmenys: Aukštis: 3,38 m Plotis: 2,10 m x 1,15 m Sandėlio numeris: 1105

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0.7 A - 50 Hertz Itjdpfxjk Eakvj Abvsg - IP65

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical specifications: - 230 V - 0.7 A - 50 Hertz - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Iedpfxslatz Dj Abvstg Belt length: 2000 mm

Būklė: paruoštas naudoti (naudotas), Transportinis konvejeris, transporterio juosta, bėgimo juosta 6 m, naudota įranga Gamintojas: Mass International Modelis: NP / 04270 Bendri matmenys: 6000 x 420 x 930 mm Itsdpfx Ajv Dgndsbveg Juostos dydis: 5675 x 200 mm Juostos greitis: 3,7 m/min Juostoje įrengti 3 ventiliatoriai, takelis gali būti ventiliuojamas/aušinamas. Elektros specifikacija: 400V

Būklė: paruoštas naudoti (naudotas), Transportband, Förderanlage, 6 m, Gebrauchtmaschine Hersteller: Mass International Modell: NP / 042/2 Gesamtabmessungen: 6000 x 480 x 1000 mm Gurtmaß: 5675 x 200 mm Bandgeschwindigkeit: 3,7 m/min Das Förderband ist mit 3 Ventilatoren ausgestattet, wodurch das System belüftet bzw. kühlbar ist. Itodpfovvlkhex Abvog Elektrische Spezifikationen: 400 V

Gamybos metai: 2024, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ET1PA24025070612, This is an UltraVent Plus hood from the manufacturer Rational, model UV PLUS 61/101/E, year of manufacture 2024. Suitable for the following index series: Index H and I, and can be used for both DUO and single units. This hood not only captures escaping steam but also eliminates odors and smoke. No external exhaust air duct is necessary. An integrated LED lamp automatically indicates when the filter needs to be changed. This version features stainless steel baffle filters and a pre-filter mat located behind them. This protects the core component—an activated carbon filter (newly installed)—from rapid contamination and ensures optimal functionality. The Plus condensation hood is ideal for front-of-house use, enclosed spaces, or show cooking. Retrofitting and installation on Rational SCC WE 61/101 models can be done with minimal effort. The hood has been tested in our in-house workshop and is fully functional, with a 6-month warranty. The listed price is net, plus 19% VAT. Itsdjwngb Ropfx Abvog Service: We are happy to refer you to a certified Rational service provider throughout Germany. Looking for a specific Rational equipment type? Contact us—we have access to a wide selection of new and used equipment. We are glad to advise you on all models, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: • 6-month warranty on all electrical parts • Premium branded equipment at fair prices • Professional refurbishment, inspection & expert cleaning • Tested & fully functional—or your money back • Shipping or self-collection available flexibly • Competent advice—before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Safety check according to DGUV V3 Technical Data: • W x D x H: approx. 854 x 1226 x 628 mm • Minimum door opening for transport W x H: 845 x 850 mm • Serial number: ET1PA24025070612 • Year of manufacture: 2024 • Electrical connection: V: 200 - 240 / Hz: 50-60 • Weight: approx. 95 kg Condition: Used, inspected, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have any questions, need advice, or would like to inspect an item in person? You can reach us by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our general terms and conditions (GTC).

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced Ijdpfx Abey S Ru Ajvstg - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 30 143 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 800 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted Iodpfx Abjy S Rtlsvjtg - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: labai geros būklės (naudotas), Parduodama profesionali įrankių galąstuvė HASBERG, modelis FSS.\nVokiškos gamybos įrenginys, tvirta ir tiksli konstrukcija.\n\n📊 Techniniai duomenys:\ngamintojas: HASBERG\nmodelis: FSS\ngamybos metai: apie 1976\nmanevra: trifazė 220/380 V\nvariklio galia: 250 W\napsukos: 2750 aps./min\n\n🛠 Būklė:\nPrekė naudota, turi įprastų naudojimo žymių, techninė būklė gera.\nĮrenginys veikia, paruoštas darbui.\n\n📦 Komplektacija:\npilnas įvorių rinkinys (skirtingi diametrai – matomi nuotraukose)\npapildomi šlifavimo akmenys\npriedai, matomi nuotraukose\n\n✅ Privalumai:\nlabai tvirta konstrukcija (vokiška kokybė)\ndidelis įvorių rinkinys (didelė vertė)\ntiksli įrankių apdirbimas ir galandimas\nidealiai tinka dirbtuvėms, įrankinėms, gamybai\n\nℹ️ Papildoma informacija:\nParduodama tai, kas tiksliai matoma nuotraukose.\nYra galimybė patikrinti vietoje.\nGalimas siuntimas ant padėklo arba atsiėmimas vietoje. Itodpsy A Tqzjfx Abvsg

Būklė: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 1 700 kg, filtravimo plotas: 286 m², siurbimo galia: 10 000 m³/val, Dulkių siurblys, suvirinimo dūmų ištraukėjas, pneumatinis savaime išsivalantis filtras, vakuuminis, skirtas nepertraukiamam darbui, garsaus prekės ženklo Donaldson Torit. Tinka plazmai, lazeriui, smėliavimui, sodavimui, suvirinimui ir visiems sausų dulkių tipams. Ventiliatorius įrengtas už filtro švarioje pusėje, todėl sprogimo rizika sumažinama iki minimumo. Filtrų kasetės Ultra Web valomos pneumatiniu būdu suspausto oro impulsais darbo metu, užtikrinant didelį įrenginio efektyvumą. Modelis - DF+12 SPKTRP Ventiliatorius 11 kW Našumas iki 10 000 m3/val. Iedpfsy D Sclsx Abvotg Antgalio skersmuo 315 mm 12 filtravimo kasečių Filtravimo plotas 286,8 m2 Pagaminimo metai - 2002 Įrengtas kibirkščių gaudymo sistema "SparkTrap" Sandėlio numeris: 1121

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, ⚡ Optimise your production – faster, more efficient, without chaos! ⚡ Are you looking for a solution to improve the organisation of production, packaging, or order picking? Discover the professional rotary table from Virginio Nastri – engineered for maximum efficiency and ergonomics. ⚙️ How does it work? The unit operates on the principle of a rotating carousel – products are placed on a circular platform that rotates around its axis. - Components are transferred smoothly and systematically to the next process stages. - Constant speed ensures a steady workflow and minimises downtime - Ergonomic access from all sides enhances operator comfort Ijdjy Awamepfx Abvotg 🔗 Complete system – ready for immediate use. The set also includes a Virginio Nastri CB/M3 conveyor belt, enabling automatic product feeding – the perfect complement for the entire production line. 💡 Why is it worthwhile? ✔️ Increased work efficiency ✔️ Improved workplace organisation ✔️ Real-time savings of time and costs ✔️ High-quality workmanship – a proven brand ✔️ Turnkey solution for integration into your production line We offer various carousel models – for crates or bags.

Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2026-078, darbinis plotis: 1 600 mm, darbinio aukščio: 100 mm, pjovimo plotis (maks.): 1 600 mm, įrankių magazino lizdų skaičius: 2, Used Machine CNC Cutter/Plotter Cutting area X and Y: 1,500 x 1,600 mm (demonstration unit) Multifunctional CAM cutting system with CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible or rigid non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head • Multifunctional tool head capable of holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard grey conveyor belt table (conveyor) • Maximum material height: 100 mm Additional tools available (on request): • EOT – Electric Oscillating Tool • POT – Pneumatic Oscillating Tool Isdpfx Ajwgc I Rsbvetg • PRT – Powered Rotary Tool • UCT – Universal Cutting Tool (drag knife) • KCT – Kiss-Cut Tool • CTT – Creasing Tool • V-Cut – Angle Cutting Tool • Printed mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system Operator-friendly: • Easily replaceable cutting tools, "PLUG & CUT" • Intuitive user interface • Simple blade changing • Vacuum zones can be activated at the click of a button Fast return on investment: • Low operating costs with high value-added • Optimum material utilization using nest expert software modules (not included) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Cuts single or multiple layers • Suitable for sheet and roll materials (can be upgraded with appropriate unwinder) • Fast return on investment (Product photo is exemplary) The machine is CE certified.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 45 h, mašinos/transporto priemonės numeris: 202023-062, Daugiafunkcinė CAM pjaustymo sistema su švaraus vandens srovės technologija – be abrazyvų (vandens pjovimo įrenginys) Ijdpfowrn Iyex Abvotg 2 pjovimo tilteliai su 2 pjovimo galvutėmis įskaitant Z ašį 1 galvutė 2D pjovimui 1 galvutė 2D pjovimui Skirta putplasčio, plastiko, techninių audinių ir kitų plokščių, lankščių, nemetallinių medžiagų pjovimui. Didžiausias praleidžiamas aukštis: 140 mm Pjovimo plotas X ir Y ašyse: 2850 mm * 2750 mm Apsaugos klasė: IP54 Įskaitant aukšto slėgio siurblį BFT 40.22 (apie 650 darbo valandų) (Gaminio nuotrauka – pavyzdinė) Įrenginys CE sertifikuotas.

Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 15 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 204065, Used CNC Cutter/Plotter Cutting area (X x Y): 2,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabrics, technical textiles, foam, and other flat, semi-flexible, or rigid non-metallic materials. Features of the used machine: • 1 cutting gantry and 1 multifunctional tool head The machine is supplied with a driven rotary knife, electrically oscillating knife, and milling tool (including extraction/collection unit) • Multifunctional tool head capable of accommodating up to 2 interchangeable tools • High-performance vacuum blower for material fixation • Supplied as standard with grey conveyor belt table (conveyor). Teal exchange conveyor available (provides high contrast for dark materials) Additional tools can be retrofitted (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven rotary knife • UCT universal cutting knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle-cutting knife • Printer mark detection • Camera registration • Punch tool for notches or holes • Milling head with extraction unit User-friendly • Easy tool changes with "PLUG & CUT" • Intuitive user interface • Effortless blade changing • Vacuum zones can be activated at the push of a button Itedeif Ek Repfx Abvog Rapid ROI • Low costs with high added value • Optimal material utilization via nest expert software modules (not included) • High speed • Consistent precision Technical data: • Fast cutting times due to high positioning speed, up to 90 m/min • Repeatability: +/- 0.25 mm • Single or multi-layer cutting capability • Suitable for both sheet and roll materials (can be expanded with appropriate unwinder) • Rapid amortization (Product image for illustration purposes) The machine is CE certified.

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 45 h, mašinos/transporto priemonės numeris: 202023-078, Daugiafunkcinė CAM pjovimo sistema su grynu vandens pjovimo technologija – be abrazyvų (vandens srovės pjovimo įrenginys). 2 pjovimo tiltai su 2 pjovimo galvomis, įskaitant Z ašį. 1 galva su kampinio pjovimo funkcija. 1 galva 2D pjovimui. Skirta pjauti putplasčiui, plastikui, techniniams audiniams ir kitiems plokštiems, lankstiems, nemetaliniams medžiagoms. Maksimalus pjaunamos medžiagos aukštis: 140 mm. Pjovimo plotas pagal X ir Y: 2850 mm * 2750 mm. Apsaugos klasė: IP54. Komplekte aukšto slėgio siurblys BFT 40.22. (Produkto nuotrauka yra pavyzdinė). Įrenginys CE sertifikuotas. Itodpfx Ajfhgvwobvjg