Jet Centro Tekinimo Staklės pirkti naudotą (51 974)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Gbsdpfx Aeu Aftgjn Hju Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws Gbsdpjvtp Edsfx An Hsu >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm Gbjdjvivmyopfx An Hsu >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Būklė: naudotas, mašinos/transporto priemonės numeris: 1717, Used WEILER PRAKTIKANT lead and feed screw lathe Gbedsuqb Emspfx An Heu Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 inserts, Lever-operated collet chucking device with 15 collets. The machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine is possible by prior arrangement.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Gjdpfxsvrcqdj An Hebu Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, veleno skylė: 105 mm, tekėjimo skersmuo: 710 mm, centro aukštis: 355 mm, tekėjimo ilgis: 1 500 mm, Tekinimo diametras tarpe: 960 mm, SN 710S x 1500 Pagaminimo metai: 2015 Acu Rite skaitmeninis ekranas Mašinos lempa Gjdjvq Ibxopfx An Hebu Aušinimo skysčio bakas Išilginis ribotuvas Nugarinis drožlių apsaugas Griebtuvo apsauga

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 660 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekėjimo ilgis: 2 000 mm, veleno greitis (maks.): 710 aps./min, bendras svoris: 7 000 kg, Poreba TPK 90A1/2M Futterdurchmesser: 800 mm Spitzenweite: 2.000 mm Umlaufdurchmesser über Bett: 900 mm Gbodpswbd Dvefx An Hou Umlaufdurchmesser über Support: 660 mm Spindeldrehzahl: 710 min⁻¹ Gewicht: ca. 7.000 kg

Būklė: naudotas, Gamybos metai: 2011, Apdirbamos detalės skersmuo ant lovio – 350 mm Apdirbamos detalės skersmuo prie priekinio atraminio taško – 216 mm Apdirbamos detalės ilgis – 1000 mm Apdirbamos detalės skersmuo įgaubtyje – 550 mm Sukimosi greitis – 40–1800 aps./min. Centrų aukštis – 170 mm Veleno kiaurymė – 40 mm Bendras energijos poreikis – 4,0 kW Apytikslis mašinos svoris – 0,7 t Reikalingas plotas – apytiksliai 2,0 x 0,85 x 1,6 m Vadovaujančio ir traukiančio sraigto tekinimo staklės - Skaitmeninis ekranas - 3 žandikačių įtvaras 160 - Atsarginiai žandikačiai - Aušinimo skysčio sistema - „Multifix“ plieninis laikiklis - 4 vnt. „Multifix“ laikikliai - Atraminė įvorė - Besisukantis žymėjimo įrankis - Drožlių surinkimo padėklas Gjdpezlkvqjfx An Hsbu - Įtvaro apsauga

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Gjdpfjxp Rvlsx An Hjbu

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Gedpfxsxp Ru Uj An Hobu

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 3 000 mm, The PORĘBA TPK-80/3M universal lathe has been extensively rebuilt and modernized by us. It features technical parameters that correspond to the specifications and operational documentation of a new machine, meets the technical acceptance standards of WOT and Polish norms, and also complies with EU requirements. Gbjdsfknw Ropfx An Heu The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, available for inspection at any time Technical Specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 5,000 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 6,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 - 1700 rpm Longitudinal Feed Range: (42) 0.055 - 3.065 mm/rev Cross Feed Range: (42) 0.025 - 1.386 mm/rev Metric Threads: (41) 0.1 - 14 mm Inch Threads: (60) 2 - 112 TPI Tailstock Quill Diameter: 60 mm Tailstock Quill Travel: 130 mm Tailstock Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features • Modern main spindle bearings with precision angular contact ball bearings Gbedpfsqwkd Uex An Heu • Hardened and ground gears and shafts, including in the feed gearbox • Central, ergonomic control for feeds and threads with leadscrew and feed shaft • Large-dimensioned, hardened, and precision-ground gears • Simple, smooth and precise speed and feed selection • Standard with rapid traverse longitudinal and cross to reduce non-productive time • One-piece, heavily ribbed machine bed for maximum torsional rigidity and minimal vibration, ensuring high turning accuracy Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Travelling steady rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 tool holders • Safety cover for quick-change tool post • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 live centers • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard • Operating tools

Būklė: naudotas, Gamybos metai: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, traces of use present - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guides adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Cross-slide adjustment range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Easy-running, hardened and ground gearbox gears mounted in 2 adjustable precision taper roller bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed design of the quick-shift feed gearbox - Gears and shafts hardened and ground, running in precision bearings in an oil bath - Switch with life-cycle calculation, tested according to EN ISO 13849 - Bed carriage forward/reverse operation switchable via control spindle - Central lubrication in bed carriage - Leadscrew cover - Emergency stop impact switch, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy, and tool-free adjustment via clamping lever - Heavily ribbed prism bed, induction hardened and precision ground, made from cast iron - Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete draining and cleaning per DIN - LED machine lamp in chip guard - Two gearbox speed ranges - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protective cable and hose routing - Thread dial indicator scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 type D for 25 mm square tool bits - Digital position display DPA 21 - Glass scales Dimensions and weights Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working ranges Centre height: 280 mm Centre distance: 1910 mm Swing diameter over bed: 560 mm Swing diameter in bed gap: 790 mm Swing diameter over cross-slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Spindle speed control: electronically adjustable Electrical data Output power (motor): 7.5 kW Total connected load: 8.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant system Coolant pump power: 125 W Standards and approvals Standard: DIN EN 55011 Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Tool post mounting height max.: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread cutting Metric pitch: 0.1 - 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 - 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 - 7 mm/rev Number of module thread pitches: 34 Travels Compound slide travel: 130 mm Cross-slide travel: 316 mm Bed carriage travel: 1710 mm Godpfx Ajx Dzxajn Hebu Feed range Longitudinal feed: 0.031 - 1.7 mm/rev Number of longitudinal feeds: 42 Plan feed range: 0.014 - 0.784 mm/rev Number of plan feeds: 42

Būklė: geras (naudotas), Gamybos metai: 1962, LZ tekinimo staklės, gamintojas VDF HEIDENREICH&HARBECK, tipas: 24 RO, pagaminta 1962 m., kapitaliai suremontuota 1992 m. Su 3 ašių skaitmeniniu indikatoriumi Heidenhain, 250 mm Forkardt griebtuvu, Multifix B įrankio laikikliu. Centros aukštis: 255 mm Gbsdpfjxziuwsx An Hju Tekinimo skersmuo virš lovos: 510 mm Tekinimo skersmuo virš skersinio vežimo: 270 mm Centro atstumas: 1000 mm Veleno anga: 55 mm Veleno apsukų diapazonas: 20–900 aps./min. Variklio galia: 6,5 kW Staklės geros būklės, yra elektros schemos. Reikalinga vieta: ilgis 3 m, plotis 1,2 m, aukštis 1,3 m, svoris apie 1800 kg.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Centras aukštis 180 mm Centras atstumas 1000 mm Maksimalus sukamasis skersmuo virš lovio: 356 mm Maksimalus sukamasis skersmuo be lovio tilto: 506 mm Maksimalus tekinimo skersmuo virš skersinio vezimo: 220 mm Maksimali tekinimo ilgis: 1000 mm Veleno galas: D1-4 / DIN55029 Veleno skylė: D38 mm Pjaunami sriegiai: metriniai, Withworth, modulio Veleno greitis: 45 – 1800 aps./min Veržliarakčio kūgis Morse 3 Veržliarakčio pinolo eiga: 120 mm Variklio galia: 2,4 kW Staklių svoris: 900 kg Godpfjxbz Ebsx An Hjbu Staklių matmenys: 1945 x 785 x 1204 mm Priedai: - 3 žandų 160 mm griebtuvas - 4 žandų 200 mm griebtuvas - Tvirtinimo plokštė D320 mm - 3 ašių skaitmeninis indikatorių sistema - Elektromechaninė veleno stabdis - Fiksuotas ir sukamasis centras - Fiksuotas smaigas - Aušinimo sistema - Halogeninė darbo lempa - Apsauga nuo drožlių - Griebtuvo apsauga - Įrankių laikiklio apsauga - Veržliarakčiai - Instrukcijų vadovai Naujas modelis, 0 darbo valandų. Prijungtas prie elektros. Parodinis eksponatas.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 with warranty Gedpfx Anog R S Rce Hebu Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen -

Būklė: naujas, Gamybos metai: 2024, Neue Maschine Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettspalt: 700 mm Bettbreite: 340 mm Spitzenweite: 1.500 mm Spitzenhöhe: 250 mm Gbodpfx Aowu Du Ien Hju Drehzahlbereich: 22 – 2.000 U/min Spindelaufnahme: Bajonett 6 Spindeldurchlass: 52 mm Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechselstahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselradsatz und Bedienungsanleitung

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Vertical Turning Center Dörries Scharmann Model: VCE 2000/160 Pallet size: 1,600 mm Pallet load capacity: max. 8,000 kg Number of pallets: 13 units Gbedpoguk S Sofx An Hou Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm Feed rate X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. turning diameter: 2,000 mm Max. workpiece height: 1,500 mm Main Spindle Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm ATC for turning: 59 positions - System 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1,500 rpm ATC for SK50: 61 positions CNC control: Siemens Sinumerik 880M Accessories: - FMS with 13 pallets - 2 rotary loading stations - Coolant unit with filtration system - Coolant through spindle Machine weight: Approx. 40 t Year of manufacture: 1993 (See also further offers from this seller)

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Vertical Turning Machine Center Dörries Scharmann Gbodpegulkiefx An Hju Type: VCE 2000/160 Pallet size: 1,600 mm Pallet load: max. 8,000 kg Number of pallets: 13 pcs Table indexing: C-axis 0.001° Table cross travel (X): 2,300 mm Column longitudinal travel (Z): 1,500 mm Crossbeam positions: 9 steps of 100 mm Feed X/Y/Z: 1 – 6,000 mm/min Rapid traverse X/Y/Z: 8 m/min Max. rotary diameter: 2,000 mm Max. workpiece height: 1,500 mm Main spindle: Spindle drive motor: 69 kW Spindle speed: 2.8 – 315 rpm ATC: 70 positions – system 240.2 Live spindle – SK50 Spindle drive motor: 30 kW Spindle speed: 10 – 1500 rpm CNC controller: Siemens Sinumerik 880M Accessories: FMS 13 pallets Rotary loading stations: 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight: approx. 40 t Year of manufacture: 1993 (2/2) (See also further offers from this advertiser)

Būklė: naujas, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Distance between centres: 1000 mm Centre height: 210 mm Godsxl Dx Eepfx An Hsbu Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mounting: DIN 55029, D1 – 6 Speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MK 4 Motor power: 3.0 / 4.5 kW Machine dimensions (W x D x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Features • Prismatic bed made of cast iron, inductively hardened and precision ground • Electromechanical foot brake for reduced idle times • Central, user-friendly control lever for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing with precision angular contact ball bearings • Large, hardened and precision-ground gears • Hardened and ground gears and shafts, also in feed gearbox • Simple, smooth, and precise speed and feed adjustment • Travelling tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large diameter workpieces Scope of Delivery • Prismatic bed made of cast iron, inductively hardened and precision ground • Electromechanical foot brake for reduced idle times • Central, user-friendly control lever for feeds and threading with leadscrew and feed shaft • Modern main spindle bearing with precision angular contact ball bearings • Large, hardened and precision-ground gears • Hardened and ground gears and shafts, also in feed gearbox • Simple, smooth, and precise speed and feed adjustment • Travelling tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large diameter workpieces

Būklė: geras (naudotas), Gamybos metai: 1972, LZ tekinimo staklės Gamintojas: HEIDENREICH & HERBECK, modelis: 21RO, pagamintos 1972 m. Su greito keitimo laikikliu Parat, 10 vnt., staklių dokumentacija, sriegių rodyklė, konuso centras, Forkardt 250 mm griebtuvas. Didžiausias tekinimo diametras virš lovio: 430 mm Didžiausias tekinimo diametras virš atramos: 255 mm Centro atstumas: 1000 mm Tekinimo ilgis: 750 mm Velieno apsisukimų skaičius: 19-2000 aps./min., 5,5 kW variklis Velieno anga: 56 mm Kiti duomenys žr. duomenų lape Užimamas plotas: ilgis 2900 mm, plotis 1100 mm, aukštis 1300 mm, svoris apie 1750 kg. Prieinami staklių dokumentai. Yra aušinimo įranga, drožlių atitvaras. Staklės geros būklės, galima parodyti su įjungta elektra. Gbedpfet Ipi Ijx An Hju

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard Gedpfx Anjvrdlce Hsbu >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Digital Readout Fagor from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal Feeds, Facing Feeds >> Thread Cutting: metric, module, inch >> Stepless Speeds from 30–3000 rpm Accessories: Gbjdpfx Ajxyh Ndjn Heu 3-Axis Digital Readout Fagor Tool Cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Tool holder >> Drill chuck; live center >> Collet system with collets >> Fixed and travelling steadies >> Machine mounts >> and much more About the Machine: For sale is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move smoothly and evenly. Even at high speeds, the Lorch runs quietly. Equipped with a Fagor 3-axis digital readout and many accessories. The machine was previously located at a university. Take advantage of the opportunity to inspect the machine under power on site and see the excellent condition for yourself.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Praktikant 160 B Gbjdpfx Aohy Tdysn Heu Year of manufacture: 1990 – overhauled Newly painted RAL 7035 light grey Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Size A quick-change toolholder - Simple bed stop - Chip guard rear wall - Operating instructions With warranty Used, as seen The machine is technically at the level of its year of manufacture.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Fixed steady rest with roller-type centering pins for SUI 80 TRENCIN Capacity: Gbjdpfx Aeu Tvdbsn Hju 210 - 370 mm 365 - 520 mm Available only as a set