Illuminata Dnr Sekvenceris pirkti naudotą (259)

Būklė: naudotas, Gamybos metai: 2023, Optimum Optiturn TX 5216V – used machine. Machine Features: - Machine bed made of heavily ribbed cast iron - One-piece machine base made of steel - High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron - Precisely machined carriage - Shafts on needle bearings, all components lubricated in an oil bath - Bed guides hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made of hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with life cycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed rod cover - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures outstanding accuracy and durability - High cutting performance allows for substantial material removal during roughing operations - Energy chain for gentle cable and hose management - Lockable chip guard travels with the carriage, featuring integrated position display and coolant hose, manually adjustable - No change gears required Godox Hdq Tspfx An Hebu - Equipped with safety mechanism to prevent simultaneous operation of threading and feed mechanisms - Electronic feed cut-off for Z-axis - Coolant system with separate coolant tank with level indicator and oil separator; easy and complete draining and cleaning according to DIN standard - Electric position cut-off with four-way stop - Three-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 Type D for 25 mm square tool - Large spindle bore Dimensions and Weights: - Length approx.: 2,925 mm - Width/depth approx.: 1,195 mm - Height approx.: 1,930 mm - Weight approx.: 2,470 kg Working Area: - Centre height: 260 mm - Centre distance: 1,600 mm - Swing over bed: 520 mm - Swing over cross slide: 324 mm - Bed width: 350 mm Spindle Speeds: - Number of speed ranges: 2 x 3 steps - Speed range: 12 – 1,800 rpm Electrical Data: - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Coolant System: - Coolant pump power: 60 W Data Type Generated: Utilization data Tailstock: - Taper: MK 5 - Quill travel: 180 mm - Quill diameter: 72 mm Spindle: - Spindle nose: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Thread Cutting: - Metric pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Imperial pitch: 60 – 2 TPI - Number of imperial pitches: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module threads: 0.25 – 7.5 mm x π - Number of module threads: 55 Travel: - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1,400 mm Feed: - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Būklė: labai geros būklės (naudotas), You are bidding on: a branded guillotine shear and folding machine from a very reputable and well-known manufacturer – Schechtl. Device specifications: Guillotine Shear HT 200 - Capacity: 1.25 mm steel – aluminium and more - Cutting length: just over 2 m (blades are in excellent condition, see pictures; original lettering still visible, which usually fades after frequent cutting) - Back gauge - LED light bar for cut gap illumination - Extendable front support Folding Machine (Abkantbank) - KS – Capacity: 1 mm steel, approx. 1.5 mm aluminium and more - Bending length: just over 2 m - Foot-operated closing mechanism - Optional back gauge or bead roller - Accessory rail Gbsdsy T H Nxspfx An Hou - Round rolls and additional rails - Sale according to §25a of the German VAT Act (UStG) The machines are in good used condition and are ready for immediate use. They come from private ownership. Important: Optionally, you can find and purchase many machines and accessories in our shop, such as various rails, back gauges – everything related to sheet metal and steel processing, including folding machines, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, as well as accessories (beading units, round rolls for gutter manufacturing, back gauges, etc.), hand tools and spare parts from many leading manufacturers. For any questions, I am always available. You will receive an invoice according to §25a of the German VAT Act (UStG); the price includes VAT (differential taxation). Free loading is available – weight approx. 750 kg and 650 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, about 3 minutes from the A3 and A81 motorways. Item numbers: Folding Machine KS 260504 & HT 260505

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme - 3-axis CNC control - High-resolution CCD matrix camera - 1.5x magnification - Incident illumination via diode ring light, 4 sectors and 1 ring can be switched individually - Precision measuring table in X and Y - Diode laser as positioning aid - Joystick and trackball for axis movement with fast/slow toggle Camera-assisted measurement data acquisition Precise edge detection in transmitted and reflected light using intelligent image processing algorithms Compact and handy – high performance Fast operation with maximum measurement precision Special features: Gbodpfsyuut Tsx An Heu - incl. Renishaw TP 200 touch probe system - Switchable LED surface illumination - Diode laser for positioning aid With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially with punched, plastic, rubber, and milled parts as well as tools, profiles, and circuit boards. Highlights of the measuring microscope include camera-assisted measurement data acquisition, fast handling, and its precision. Of particular note is the accurate edge detection in transmitted and incident light using advanced image processing algorithms. Despite its high performance, the WM1 300 CNC is compact and easy to handle, measuring only 900 mm × 950 mm × 950 mm.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 155 mm, Y ašies eiga: 105 mm, Z ašies eigos atstumas: 105 mm, įėjimo įtampa: 110 V, įvesties srovės tipas: Oro kondicionierius, stalo ilgis: 405 mm, įėjimo srovė: 3 A, stalo plotis: 155 mm, Įranga: apšvietimas, Mitutoyo PH-350H Profile Projector Item number: 172-101-4 Gbsdpewr Uvqjfx An Heu Serial number: 70174 TECHNICAL DATA: Screen size: 35.5 cm Table area (3 T-slots): 15.5 cm x 40.5 cm X-axis travel: 15.5 cm Y-axis travel: 10.5 cm Z-axis travel: 10.5 cm Table rotation: +/- 10 degrees Projection type: horizontal Maximum table load: 40 kg Surface illumination: 150 W halogen lamp Electrical system: 110 V/50 Hz/3 A Comparator dimensions: 76 cm L x 122 cm W x 117 cm H Housing dimensions: 51 cm L x 122 cm W x 45 cm H

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, 5-axis simultaneous machining centre MAZAK Variaxis 630-5X II T with rotary function and premium equipment. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. working height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - Through-spindle coolant (IKZ) - Showa oil mist extraction unit - Renishaw probe The following features/options are included: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing unit - High-pressure through-spindle coolant, 70 bar - Pressure switch for through-spindle coolant - Chip conveyor discharge to the right (Consep) - MAZAK Monitoring System B, incl. Renishaw probe MP10 - Prepared for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip control for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement Gbjdpfox Db D Asx An Hsu - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operating function - High-precision finish machining control - Cylindrical interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck, 21" - Additional workspace illumination The machine is in very good condition and can be inspected under power at its location.

Būklė: geras (naudotas), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device specifications: - Shear type: Schröder MHSU - Cutting capacity (see nameplate): up to 3mm steel; significantly more for aluminium - Usable length: just over 2m - Manual backgauge approx. 750 mm / electronic digital readout up to 1000 mm - Side/wedge stop - Stop extension to 2m - Reversible blades - Cutting gap illumination - Sheet metal chute - Foot pedal operation - Weight approx. 1.3 t We also have further equipment available, such as: - Schechtl MAX 200 – 2.5 mm - Schechtl MA 200 – 2 mm and HA - Schröder AKV – 2 mm, KSV – 1.5 mm, and KS – 1 mm - Folding machines and shears from RAS, etc. The current new price (net) is approx. €25,000. You will receive an invoice with VAT shown separately. The invoiced amount includes VAT. I can arrange shipping if desired; a forklift is available onsite. Gedjy R Efajpfx An Hebu Free loading as shown in the photos. Viewing and testing are possible by appointment (please call in advance). Payment in cash upon collection. If there is anything else I can assist you with, please give me a quick call. Thank you. Pick-up should be arranged within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway). Article number: Schröder MHSU 2m 3mm 260511.

Būklė: naudotas, Funkcionalumas: nepatikrintas, įėjimo įtampa: 220 V, Used Leitz Wetzlar measuring microscope setup (UWM) with external XY readout and power supply for illumination. Manufacturer: Ernst Leitz GMBH Wetzlar Movement possible on X and Y axis, and height-adjustable. A camera can be added to the top for capturing images. Gbsdpswm Hqcofx An Hou Digital X and Y axis readout via Sony Magnescale LH31A-2.

Būklė: geras (naudotas), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the United Kingdom. This is a modern eyepiece-free microscope, providing spatial 3D imaging without the need to place your eyes against traditional eyepieces – ensuring exceptional comfort for applications such as quality control and precision assembly. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 lens) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base Gbsdjxtfqxjpfx An Heu • Power supply: 230 V • Focus and head height adjustment • Serial number: MFS 11572 • DGUV inspection – current safety certification Condition: • Used, optics clean, mechanics fully functional • Damaged upper cover of the plastic component (visible in the photos) – does not affect performance or image quality • Illumination functions perfectly • Device tested – ready for use Applications: Laboratories, quality control, electronics, optics and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Būklė: naudotas, Gamybos metai: 2023, x-axis travel: 3000 mm y-axis travel: 820 mm z-axis travel: 720 mm Control: Mazatrol Smooth G Spindle taper: SK 40 Spindle speeds: 35 - 12,000 rpm Spindle drive: 15 kW Distance spindle nose to table top: 140 - 860 mm Table load capacity: 2500 kg Rapid traverse x/y/z: 50 m/min Table width: 3500 mm Table length: 820 mm Table height above floor: 870 mm T-slots: 7 T-slot width: 18 mm T-slot spacing: 100 mm Tool changer: 48 positions Tool change time: 4.7 sec Tool diameter with 2 free positions: 130 mm Tool diameter (full magazine): 80 mm Max. tool weight: 8 kg Max. tool length: 350 mm Required air pressure: 5 - 9 bar Air consumption: 260 l/min Electrical specification - voltage/frequency: 400 V / 50 Hz Coolant tank capacity: 500 l Total power consumption: 46.7 kW Machine weight approx.: 15.4 t Space requirement approx.: 5.3 x 3.6 x 3.3 m Standard machine including the following special accessories: - Preparation for dual oil mist extraction - Air cooling through the rotating milling spindle - 48-position tool magazine - Handwheel (pulse generator) - 3-color LED signal light - Additional workspace illumination - Air blowing device at the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Preparation for MAZAK Monitoring - Chip conveyor, discharge left side (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with programmable chip breaking - Synchronous tapping - Rapid traverse with constant inclination angle STANDARD ACCESSORIES - Transformer for the European market - USB port (1 connection) - Mazak standard paint - Workspace illumination SAFETY EQUIPMENT - Operator door with interlock switch - Work area enclosure - Splash guard encloses the work area from the sides - Fully enclosed work area - Protection against chips, coolant, and access to the work area during automatic operation - Safety devices compliant with global standards COOLANT SUPPLY - Coolant supply through spindle (pump pressure = 5 bar) - Complete coolant system including pumps, valves, piping, and nozzles for efficient production of quality components FACTORY AUTOMATION - Automatic on/off and warm-up function - Automatic warm-up activation via digital timer switch Gsdpfx Aneyvvlus Hebu MEASUREMENT SYSTEM - Tool length measurement and tool breakage detection NUMERICAL CONTROL - Horizontally adjustable NC operating panel - Relocation Detector - Mazatrol SmoothG control - 19" LCD color touchscreen - Mazak thread drilling/drilling cycle Tornado (Mazatrol) - EIA/ISO input function - Background toolpath simulation - 3D coordinate transformation - Form compensation for rotary axes - Mazacc-2D software (contour compensation) - Mazacc-3D software package - MAZACC-3D high-speed software package (NO456) additionally required - High-smoothing control - LAN interface - SD memory card interface - Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece form compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Form compensation for rotary axes - NO497 D) High-accuracy control for finishing operations - Seamless corner control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse path rounding function - Absolute positioning system - All dimensions, weights, and performance data are non-binding - - Used ma...

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 33124, rida: 999 km, galia: 235 kW (319,51 AG), pirmoji registracija: 08/2026, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: oranžinė, vairuotojo kabina: dieninė kabina, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 6e, pakaba: plienas-oras, krovinio erdvės tūris: 11,5 m³, Įranga: ABS, elektroninė stabilumo programa (ESP), kruizo kontrolė, oro kondicionavimas, oro pagalvė, sunkvežimio registracija, trauki kontrolė, vairo stiprintuvas,

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is currently on display and has only been used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC Lathe directly from the manufacturer. S400 HSC – The OPTIMUM Premium CNC milling machine equipped with Siemens SINUMERIK 828D control stands out due to its performance, speed, precision, and long service life. Heavy-duty design · Compact construction · SIEMENS servo motors on all axes · Renishaw measuring arm for tool measurement · All servo motors with integrated encoder for maximum accuracy · Main spindle designed as a motor spindle · 45° slant bed design allowing for especially large machining diameters and unobstructed chip removal to the chip tray · Hydraulic 3-jaw chuck Ø 170 mm with soft jaws · Servo tool changer VDI 30 with 12 tool stations · Hardened and precision-ground ball screws for rapid axis traverses · Faster tool change speed · High hydraulic clamping force · Heavy-duty machining without vibration, ideal for the implementation of automation and high efficiency even under extreme conditions · Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity · Manual tool measuring device · Heat exchanger · Portable electronic handwheel with enabling button and emergency stop facilitating program set-up · Belt-type chip conveyor for efficient chip removal · Work lamp for complete illumination of the work area · Coolant unit with cleaning gun · RJ45 and power interface · EMC (electromagnetic compatibility) · SIEMENS additional package for material defect liability and free online/on-site service OSS Plus (see “SIEMENS OSS Plus Additional Package” on page 117) · 1 year Basic maintenance contract included Machine Data Electrical connection: 400 V / 3 Ph ~50 Hz Total connected load: 25 kVA Spindle Drive motor S1 duty: 11.6 kW Torque, drive motor S1 duty: 65 Nm Drive motor S6-30% duty: 14.4 kW Torque, drive motor S6-30% duty: 81 Nm Spindle mount: A2-5 Spindle bore: Ø 56 mm Chuck pass-through: Ø 45 mm Hydraulic chuck: Ø 170 mm Coolant System Coolant pump power: 700 W Tank capacity: 160 liters Hydraulic System Hydraulic pump power: 1.5 kW Tank capacity: 36 liters Machining Data Max. turning diameter: 220 mm Gsdpfx Anoymlhro Hjbu Turning length: 320 mm Swing diameter over cross slide: 300 mm Swing diameter over machine bed: 500 mm Slant bed: 45° Speed Range Spindle speeds: 30 – 6,000 rpm Tool Changer Type: Servo VDI 30 Number of tool stations: 12 Accuracy Repeatability: ± 0.004 mm Positioning accuracy: ± 0.004 mm Travel X-axis: 180 mm Z-axis: 350 mm Feed Force (Dynamic) X-axis: 3.6 kN Z-axis: 3.6 kN Feed Speed X-axis / Z-axis: 30 m/min Motor Torque X-axis / Z-axis: 6 Nm Dimensions Length x width x height: 2,000 x 2,250 x 1,550 mm Total weight: 2,600 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W202001, stalo ilgis: 800 mm, stalo plotis: 550 mm, Įranga: dokumentacija / vadovas, H-Frame Press – 30 t – Double Column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale is a hydraulic double-column press (H-frame press) with 30 t pressing force. This machine is highly versatile and can be used as an assembly press, small batch press, manual loading press, vulcanizing press, or heating press. The unit is approximately 2.5 years old, has never been used (no operating hours), and comes with a full warranty. Inspection is possible at our Ennepetal warehouse. ===== Technical Data & Information: Hydraulic Double-Column Press – 30 t ==== General Specifications - Design: Double Column Press (H-frame) - Pressing Force: 5–30 t (adjustable) - Machine Weight: approx. 2,000 kg - Paint Finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table Size: 800 × 550 mm (additional variant 700 × 500 × 70 mm) - Ram Plate: 700 × 500 × 80 mm - Max. Table/Ram Distance: 500 mm - Stroke: 500 mm - Clear Width at Front: 820 mm - Table Height: 800 mm ==== Speeds - Approach Speed: approx. 45–50 mm/sec - Return Speed: approx. 40–55 mm/sec ==== Hydraulics Gbodou U Ey Iepfx An Heu - Operating Pressure: up to 300 bar - Hydraulic Pump: ASC, 28.5 l/min - Motor Power: 11 kW - Oil Tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide Columns: Ø 50 mm - Ram guided by 2 guide columns - Robust machine frame - Rear and side guards fully enclosed ==== Controls & Operation - Pressing force adjustable via rotary knob - Adjustable two-hand control (3 m supply cable) - Position limitation via cam switch - Stroke limitation via adjustable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Anti-reach safeguard - Optional overreach protection - Emergency stop button - Safety inspection with test certificate ==== Equipment - Control cabinet technology from leading brands - Illumination in press area - Ejection chute in table ==== Options - Heating plates: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & training ==== Delivery Time & Service - Delivery time: approx. 6 weeks (without heating plates) - Heating plates: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming processes, vulcanization, hot pressing Hydraulic press, H-frame press, double column press, assembly press, small batch press, vulcanizing press, heating press, industrial press Looking for a hydraulic press tailored to your specific application? Contact us for an individual quotation. Our hydraulic presses are manufactured in accordance with German machinery guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these regulations. Our key strength is in special machine construction and press automation. We offer custom-built hydraulic presses at remarkably competitive prices. For press hydraulics, we primarily use components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2022, Sheet width: 3100 mm Sheet thickness: 10.0 mm Sheet thickness (stainless steel): 6.0 mm Hold-downs: 14 units Strokes: 13 strokes/min Cutting angle: 2.0 ° Throat depth: 350 mm Backgauge (adjustable): 1000 (+) mm Oil capacity: 260 ltr. Motor power: 22.0 kW Weight: 10,575 kg Dimensions (L x W x H): 4100 x 2400 x 2170 mm Demo/exhibition machine (!!) From our showroom (as new) With very few operating hours Manufacturer ERMAK provides with the HGD model series of hydraulic swing beam shears a robust and durable machine for efficient sheet metal processing. This compact all-round machine helps you increase your productivity. The hydraulic swing beam shear, model HGD, supports precise, rapid, and cost-effective cutting in your daily workflow. The use of hydraulic hold-downs to fix the sheet and the support table fitted with ball rollers ensures ergonomic and efficient cutting for your operator. CNC control enables the use of a variety of sheet types, which are already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is set automatically by CNC-controlled electro-hydraulics but can also be adjusted manually. The position and retraction function of the motorized backgauge are easily set via touchscreen. Additionally, the control offers program memory for cutting sequences. ----- Robust electro-hydraulic CNC swing beam shear * Including CYBELEC CNC touch screen control * Including CNC electro-hydraulic cutting gap adjustment ----- Equipment: - CNC electro-hydraulic swing beam shear - Including CYBELEC "CybTouch 8" touch screen controller - Some CNC control functions: * Backgauge (X-axis) positioning * Cutting gap adjustment * Piece counter * Cutting length limitation * Material selection, including sheet thickness * Cutting line illumination (cutting to scribed lines) and many more - Motorized backgauge, travel: 5.0 - 1,000 mm (X-axis) * On recirculating ball screws * Automatically swings up at maximum travel for longer cuts * Includes selectable swing-away (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: 80 mm/sec - 1x side gauge with T-slot and mm scale - 2x front support arms with T-slot and mm scale - Ball rollers in front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for line cutting - Cutting line illumination with shadow projection - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain at the rear (safety device) Gjdpfexab I Hjx An Hebu - Freely movable foot switch - CE mark / declaration of conformity - Operating manual + circuit diagram + hydraulic schematic Including special equipment: - Pneumatic sheet support device for thin sheet cutting

Būklė: naudotas, Hydraulic Guillotine Shear SAFAN Type VS 310 / 4 Machine No. B7140 Year of manufacture: 1984 Cutting length: 3100 mm Cutting thickness: 4 mm Back gauge: 900 mm, accuracy +/- 0.5 mm Front left squaring arm: 2100 mm Hydraulic tank capacity: approx. 120 liters Drive power: 7.5 kW Power supply: 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single and continuous stroke with adjustable stroke pause - Adjustable cutting angle - Manual blade gap adjustment Gbsdsumpq Nepfx An Hsu - Infinitely variable cutting length adjustment - Cutting line illumination - 17 hydraulic sheet holders - Left squaring arm with scale, 2100 mm - 2 material support arms, 1600 mm - 2 material support arms, 615 mm - Electric foot switch - Fixed finger guard in front of the hold-downs Required floor space without sheet supports (L x W x H): 3850 x 2300 x 1680 mm Machine depth with sheet supports: 3900 mm Weight: 5.7 tons Good condition

Būklė: naudotas, „Thermo Fisher Scientific“ „KingFisher FLEX“ magnetinių dalelių apdorojimo įrenginys Prieinama 4 vnt. Gamintojas: „Thermo Fisher Scientific“ Modelis: „KingFisher FLEX“ Įrangos tipas: Automatinis magnetinių dalelių apdorojimo įrenginys / nukleino rūgščių išvalymo sistema Paskirtis: Automatinis DNR/RNR išvalymas ir mėginių paruošimas Aprašymas: „Thermo Fisher Scientific“ „KingFisher FLEX“ yra automatizuota magnetinių dalelių apdorojimo sistema, skirta didelio našumo išvalymui ir mėginių paruošimui. „KingFisher FLEX“ naudoja magnetinių granulių technologiją, kad automatizuotų biologinių mėginių apdorojimą, užtikrindama nuoseklų ir atkuriamą DNR, RNR, baltymų ir kitų biologinių molekulių išvalymą. Jis plačiai naudojamas molekulinėje biologijoje, genomikoje, biotechnologijoje, farmaciniuose tyrimuose ir klinikinių laboratorijų aplinkoje. Ši sistema ypač tinka laboratorijoms, kurios siekia automatizuoti pasikartojančius mėginių paruošimo ir išvalymo procesus, kartu sumažindamos rankinį darbą ir didindamos našumą. Pagrindinės funkcijos: Automatinis mėginių apdorojimas, pagrįstas magnetinėmis granulėmis Sukurta didelio našumo laboratorijos procesams Tinka DNR ir RNR išvalymui Gali būti naudojama baltymų ir kitų biomolekulių išvalymui Programuojami automatiniai apdorojimo protokolai Nuoseklus ir atkuriamas mėginių paruošimas Tinka moksliniams tyrimams, biotechnologijos ir farmacijos laboratorijoms Godpfoz I S D Sex An Hjbu Palaiko įvairius plokščių formatus, priklausomai nuo konfigūracijos Paprastas naudoti automatinis valdymas Kompaktiškas dydis laboratorijoje Tipinės paskirtys: DNR išvalymas RNR išvalymas Nukleino rūgščių ekstrahavimas PGR mėginių paruošimas Genomika ir molekulinė biologija Naujos kartos seknavimo procesai Baltymų išvalymas Farmacinis tyrimas Biotechnologinis tyrimas Didelio našumo mėginių paruošimas Pašalintas iš farmacijos gamyklos Korke, Airijoje. Įrenginiai yra labai geroje būklėje. Pardavinėjami tokie, kokie yra. ----- Raktiniai žodžiai: „Thermo Fisher“, „Thermo Scientific“, „KingFisher FLEX“, „King Fisher Flex“, „KingFisher Flex“ išvalymo sistema, magnetinių dalelių apdorojimo įrenginys, magnetinių granulių apdorojimo įrenginys, DNR ekstrahavimas, RNR ekstrahavimas, DNR išvalymas, RNR išvalymas, nukleino rūgščių ekstrahavimas, mėginių paruošimas, automatinis mėginių paruošimas, molekulinė biologija, genomika, biotechnologija, farmacijos laboratorija, laboratorijos automatizavimas, PGR paruošimas, NGS, naujos kartos seknavimas, baltymų išvalymas, mokslinių tyrimų laboratorijos įranga, mokslinė įranga, laboratorijos įranga.

Gamybos metai: 2014, veikimo valandos: 7 h, būklė: naudotas, mašinos/transporto priemonės numeris: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with M20 adapter with screwdriving point illumination Gbsdsvxu Dvspfx An Hju with connection cable without additional accessories suitable for Desoutter CVIC II-L2 or CVIC II-H2 screw controller Drive: Hex 1/4" female Torque: Min.: 1.0 Nm Max.: 4.0 Nm No-load speed: 2000 rpm Weight: 0.6 kg

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7.7733.0, bendras svoris: 5 kg, bendras ilgis: 300 mm, bendras plotis: 200 mm, bendras aukštis: 120 mm, slėgis (maks.): 16 juosta, KAESER SAM BASIC yra pramoninis sekvenceris, skirtas kompresorių darbo valdymui centralizuotose sistemose. Sukurtas daugelio kompresorių automatizavimui ir optimizavimui pramonės įmonėse. Gjdpfx Aewtm D Aon Hsbu Pagrindinės savybės: Slėgio matavimo diapazonas: 0–16 bar Maitinimo įtampa: 100–240 V, 50/60 Hz Fazės: 1 fazė / N / PE Didžiausia srovė: 0,7 – 0,35 A Papildoma informacija: Modelis: SAM BASIC Dalies numeris: 7.7733.0 Serijos numeris: 1867 Gamybos metai: 2007 Elektros schema: SWASAMB.4–01018.01 Gamintojas: KAESER KOMPRESSOREN GmbH, Vokietija

Būklė: labai geros būklės (naudotas), Shimadzu Type: Prestige-21 / with AIM-8800 Infrared Microscope Shimadzu IR Prestige-21 Infrared Spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in research and development. It makes an excellent addition to the existing FTIR series, which already covers the standard laboratory range. AIM-8800 Specifications Optics: 15x Cassegrain objective 15x Cassegrain condenser mirror with inlet for purging MCT Detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 – 720 cm⁻¹ Type 2 - 5000 – 650 cm⁻¹ Electrically actuated aperture XY Θ directional drive. XY directional increments can be set to 1 µm over the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum adjustment value: 3 µm Motorized XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm Resolution: 1 µm spacing Sample thickness: Reflection mode - ≤ 40 mm Transmission mode - ≤ 10 mm Operation via the main unit's keypad Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Gbsdpfxjzdyyie An Hsu Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / aperture setting / aperture preview / measurement position and recording of aperture setting (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540 mm x H520 mm x 36kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine is on display. Optiturn Premium CNC Lathe direct from the manufacturer. S600M – The OPTIMUM Premium CNC Lathe equipped with Siemens SINUMERIK 828D control system. • Heavy-duty construction • Renishaw probe arm for manual tool measurement • Ball screw with improved accuracy, rigidity, and heat resistance • Siemens servo motors on all axes • All servo motors with integrated encoders for maximum accuracy • 45° slant bed design for exceptional rigidity • Hydraulic three-jaw chuck, Ø 200 mm • Sauter tool turret VDI 40 with 8 tool stations and driven tooling • Hardened and precision-ground ball screws for high rapid traverse speeds in all axes • Manual tool measurement setup • Tailstock with hydraulic quill • Heat exchanger • Portable electronic handwheel with enabling switch and emergency-stop button greatly simplifies program setup • Chip conveyor in belt design • Work light for complete illumination of the workspace • Coolant system with cleaning gun Linear Guideways • Maximum static and dynamic rigidity • High positioning accuracy • Smooth, backlash-free movement • Hydraulic VDI 40 turret head • All 12 stations powered by an integrated motor, designed for speeds up to 4,000 rpm Machine Bed • Heavily ribbed • 45-degree incline • High rigidity and durability • Facilitates chip removal SAFETY Integrated – Setup with open door • Functional safety also protects against high costs! Complete Package • Safety Integrated • Remnant material detection and processing • ShopMill step programming • Manage network drives • 3-D simulation • Trace recording Additional Package SIEMENS OSS Plus • 12 months; Article no. 3589020 • 24 months; Article no. 3589021 • 36 months; Article no. 3589022 Dimensions and Weights Length approx. 4570 mm Width/Depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Work Areas Chuck diameter: 320 mm Turning length: 475 mm Swing over bed: 570 mm Swing over cross slide: 400 mm C-Axis (Factory Option) Angular accuracy: 51” Repeat accuracy: 20” Motor Torque X-axis: 11 Nm Z-axis: 11 Nm Speed Range Spindle speed range: 30 – 4000 rpm Rapid Traverse Speed X-axis: 24 m/min Z-axis: 30 m/min Electrical Data Supply voltage: 400 V Network frequency: 50 Hz Total connected load: 40 kVA Accuracy Repeatability: ±0.002 mm Positioning accuracy: ±0.004 mm Chuck passage diameter: 51 mm Slant bed: 45° Tailstock Taper: MK 5 Quill stroke: 100 mm Quill diameter: 100 mm Quill feed: hydraulic Spindle Spindle mount: DIN ISO 702-1 No. 6 Hydraulic chuck diameter: 200 mm Spindle nose: A2-6 Main spindle bore: 65 mm Travel X-axis: 235 mm Z-axis: 530 mm Gedoymk Ukopfx An Hebu Vertical spindle Continuous duty (S1) drive power: 11 kW S6-30% duty cycle drive power: 22 kW Drive motor torque: 70 Nm Drive motor S6-30% torque: 140 Nm Feed Force Feed force X-axis: 8.4 kN Feed force Z-axis: 5.6 kN Tool Turret Type: Servo VDI 40 - DIN5480 Number of tool stations: 12 Drive motor power: 4.82 kW Maximum admissible speed at tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Būklė: naudotas, Šis skelbimas skirtas „Cytiva Axichrom 140/300“ chromatografijos kolonai. Įrenginys yra visiškai veikmingas ir paruoštas nedelsiant naudoti. Ši didelio našumo, žemo slėgio ašinė suspaudimo kolona yra sukurta siekiant užtikrinti prognozuojamą bioprocesų masto didinimą ir efektyvų valymą. Ji palaiko automatizuotus kolonų užpildymo procesus, naudojant modernias chromatografijos dervas, kad būtų užtikrintas atkuriamas, aukštos kokybės sluoksnio vientisumas ir atskyrimo rezultatai. Skaidrumo ataskaita ir techninė audito ataskaita: Programinė įranga ir laikmenos: kadangi tai yra tiesiogiai iš laboratorijos tiekiama prekė, bet kokia originali programinė įranga ar priedai, esantys kartu su įrenginiu, pateikiami kaip komplimentas. Licencijavimo pranešimas: Mes neteikiame, neperduodame ir negarantuojame programinės įrangos licencijų ar raktų. Pirkėjas yra atsakingas už visą programinės įrangos licencijavimą, registravimą ir suderinamumą su darbo stotimi per gamintoją. Pranešimas dėl pirkimo: šis įrenginys parduodamas „toks, koks yra“. Nors mes patvirtiname, kad įrenginys įsijungia ir yra fiziškai tvirtas, neatliekame analitinio patvirtinimo, skysčių testo ar operacinio kalibravimo. Tai idealiai tinka laboratorijoms, turinčioms savo techninių ekspertų arba esamas paslaugų sutartis. Įtaka aplinkai: pasirinkdami tiesioginį pakartotinį naudojimą, jūsų įstaiga sumažina naujos gamybos poveikį aplinkai ir apsaugo specialias medžiagas nuo patekimo į atliekų srautą. Tiesioginis pakartotinis naudojimas laboratorijoje yra efektyviausias būdas aprūpinti modernią laboratoriją. Licencijavimo pranešimas: Mes neteikiame, neperduodame ir negarantuojame programinės įrangos licencijų ar raktų. Pirkėjas yra atsakingas už visą programinės įrangos licencijavimą, registravimą ir suderinamumą su darbo stotimi per gamintoją. Pranešimas dėl pirkimo: šis įrenginys parduodamas „toks, koks yra“. Nors mes patvirtiname, kad įrenginys įsijungia ir yra fiziškai tvirtas, neatliekame analitinio patvirtinimo, skysčių testo ar operacinio kalibravimo. Tai idealiai tinka laboratorijoms, turinčioms savo techninių ekspertų arba esamas paslaugų sutartis. Poveikis aplinkai: Pasirinkdami tiesioginį pakartotinį naudojimą, jūsų įstaiga sumažina naujos gamybos poveikį aplinkai ir apsaugo specialias medžiagas nuo patekimo į atliekų srautą. Tiesioginis pakartotinis naudojimas laboratorijoje yra efektyviausias būdas aprūpinti modernią laboratoriją. Norėdami peržiūrėti daugiau chromatografijos kolonų, spustelėkite čia: ?q=chromatography Populiariausi naudojimo būdai: – vaistų, antikūnų, baltymų ir kitų veikliųjų ingredientų valymas. – baltymų, fermentų, antikūnų, vakcinų ir kitų biologinių preparatų valymas. – tyrimai, susiję su baltymais, DNR, metabolitais, farmacijos preparatais ir cheminėmis medžiagomis. – cheminių medžiagų ir tarpinių produktų atskyrimas ir valymas. – cukrų, skonių, priedų, teršalų ir kitų komponentų analizė. Gbjdpfx Anszqf Hns Hsu – vandens, dirvožemio ir oro mėginių tyrimas, siekiant nustatyti teršalus. – vaistų, metabolitų, hormonų ir kitų biologinių junginių analizė. – angliavandenilių ir naftos produktų analizė ir atskyrimas. – analitinės ir valymo paslaugos farmacijos ir biotechnologijų įmonėms. – fermentacijos produktų tolesnis apdorojimas ir valymas.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Modular Plant Growth Cabinets Fitotron®, Type HGC 1014 V incl. HQI-T and Krypton lighting module Temperature range -10°C to +45°C for temperature testing Test chamber volume approx. 1300 l Simpac control system Network connection USB port The plant growth chambers of the Fitotron® HGC series are based on a modular design. Individual modules can be added or replaced as required, making them adaptable for different applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: -10°C to +45°C Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH: approx. 0.8 kW Technical Data for Climatic Tests with Illumination Temperature range: +10°C to +45°C with lights on Temporal temperature deviation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity deviation: ± 3 to 5% RH Humidification and dehumidification system, test chamber stainless steel Internal dimensions: Height 1400 mm x Depth 750 mm x Width 1270 mm External dimensions: Height 1985 mm x Depth 980 mm x Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Computer interface Gjdpfxjv Ivnze An Hsbu Connection: 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Tube port ∅ 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg lighting module

Būklė: naudotas, Gamybos metai: 1999, Apžvalga Ši pilnai komplektuota karštai ir šaltai pilstymo linija buvo pagaminta 1999–2017 metais Vokietijos kompanijų KHS ir Krones. Linija skirta gėrimų gamybai stiklo ir PET buteliuose, palaiko tiek karštą, tiek šaltą pilstymą. Ji buvo eksploatuojama iki 2025 m. pabaigos, vis dar sumontuota vietoje ir iš karto prieinama. Liniją galima apžiūrėti pagal pageidavimą. Techniniai duomenys - Našumas: 12 000–36 000 butelių/val. (pavyzdys: apie 33 000 butelių/val. su 500 ml) - Formatai: 250 ml – 1000 ml - Pritaikymas: gėrimų karšto ir šalto pilstymo procesai - Talpyklų tipai: stikliniai ir PET buteliai (karštas pilstymas) - Pilstymo temperatūra: 10 °C – 104 °C - CO₂ galimybė: Taip - Užsukamieji dangteliai: - Stiklas: 28 mm aliuminis, 33 mm / 43 mm aliuminio srieginius dangtelius - PET: 38 mm 3-eigio karšto pilstymo užsukamasis dangtelis - Etiketavimas: šalto klijų popierinės etiketės (galima pasirinkti rankovinius etiketes) - Pakavimas: dėžės ir padėklinės pakuotės (be termiškai susitraukiančios plėvelės pakavimo) Komplektacija - Išpakuotojas | Meypack | DL 71 | - | Žemų išmatavimų išpakuotojas su padėklų konvejeriu ir žurnalais - Butelių plovimo įrenginys | Niko | Linear Rinser | 1999 | Siemens S7 valdymas, šilumos grąžinimo sistema - Pilstymo mašina | KHS | Innofill DNR 80 | 1999 | 80 vožtuvų, 15 galvučių aliuminio užsukamųjų dangtelių uždarymas, HMI atnaujintas 2015 m. - Twist-off dangtelių uždarytuvas | Italmeccanica / Crown | S4BLH | - | Garu šildomas, automatinė dangtelių padavimo sistema - Aušinimo tunelis | Tuchenhagen / Göbel | K1-135 | - | 7 aušinimo zonos - Butelių džiovintuvas | Europool | - | 2007 | Didelio greičio oro džiovintuvas Gjdpfoyx I Awex An Hebu - Etiketavimo mašina | Krones | Starmatic | - | Šalto klijų etiketavimas, Siemens S5 - Grupinės pakuotės vyniotuvas | Kisters | 320/50 | 1999 | Padėklų ir dėžių pakavimas, Nordson karštų klijų sistema - Konvejeriai | KHS / Krones | - | - | Pilnai komplektuota konvejerių sistema - Paletavimo įrenginys | KHS | LORD 1BSN2 | 1999 | Išankstinis grupavimas, Düsseldorf/Euro/Industrial padėklų formatai - Paletės etiketavimo įrenginys | Logopack | - | - | Paletės etiketavimo sistema - Atvirkštinės osmozės sistema | MWT | - | - | Našumas 800 l/val.

Būklė: naudotas, KB Prüftechnik Hardness Testing Machine Type: KB 750 BVRZ Machine Type: KB 750 – 1 kg to 750 kg UNIVERSAL DIGITAL KB Universal Hardness Testing Machines for automatic, standards-compliant hardness testing. Suitable for all hardness testing methods within the load range HV 0.2–1 – 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics), and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of indentations on the built-in LCD monitor via integrated video camera and zoom lens ensure the highest evaluation accuracy as per standards. All hardness values are displayed digitally in real time. Gjdszg Tyuspfx An Hebu User-friendly and powerful control panel with high-contrast, glare-free color LCD monitor. Impression measurements are parallax-free. Test forces are applied electronically with maximum precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment set to enable immediate commissioning with the ordered indenters. A selection of mounts, test tables, indenters, objectives, hardness comparison plates, etc., are available. Connection to a PC or central computer is possible with all KB hardness testing machines. With the optional full automation software and motorized cross table, the machine can be operated as a fully automatic system. - Fully automatic testing process - Optical evaluation via integrated video analysis - Extremely user-friendly and efficient - Large color LCD display - Industrial membrane keypad - Flexible software customization - 1:7 zoom lens - Parallax-free measurement - Force measuring cells, regulated force application, LED illumination - Rockwell resolution: 0.025 HRC - Extremely efficient - 200 user-definable test programs - Calibration machine accuracy (option) - Innovative LED ring light (option) - Automatic image evaluation (option) - 2 parallel + serial interfaces, plus keyboard connection - Extended load range XL (option) - Freely switchable language selection - German, English, French, Italian KB750 BVRZ: Test load: 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Super Rockwell Test table Ø80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating features: Programmable digital panel with the following functions: - Measuring the hardness indentation on the LCD display with movable measurement markers, parallax-free - Logically structured, simple user interface - Freely create and store up to 200 test programs - Automatic force selection based on chosen test method - Freely selectable application times for test forces - Freely selectable holding times for test forces - Online help - Automatic correction for curved surfaces in accordance with DIN EN ISO - Control of the fully automatic testing process - Direct digital hardness value display - Tolerance display - Conversions according to DIN 50150 Table B1 - Report generation in DIN A4 format with standard printer via parallel interface - Serial interface for data output to PC - Optional network connectivity - Four languages: German, English, French, Italian Statistical functions, such as: - Number of tests - Min / Max - Mean value - Range - Standard deviation - cp / cpk - Histogram (Technical data subject to change and errors excepted!)

Būklė: geras (naudotas), Roche COBAS TaqMan + AmpliPrep – amplifikacijos detektorius Gamintojo aprašymas, visa informacija pateikiama be jokių garantijų. Automatizuotas realaus laiko amplifikacijos ir detekcijos analizatorius. Didelės talpos mėginių formatas, leidžiantis atlikti automatizuotą realaus laiko DNR arba RNR amplifikaciją ir detekciją vienu metu iki keturių analizų. Prijungus prie dokavimo stotelės, ši sistema užtikrina visiškai automatizuotą mėginių perkėlimą – nuo COBAS® AmpliPrep prietaiso iki COBAS® TaqMan® analizatoriaus. Savybės Gbjdpfxsu D D E Re An Hou * Veikia su COBAS® AmpliPrep prietaisu ir dokavimo stotele, užtikrinant visišką mėginių paruošimo, amplifikacijos ir detekcijos automatizavimą. * Veikia prijungtas prie COBAS® AmpliPrep prietaiso. * AMPLILINK programinė įranga suteikia paprastą ir efektyvią vartotojo sąsają, skirtą specialiai sukurtam, „Windows®“ pagrindu veikiančiam kompiuteriui, kuris tiekiamas kartu su sistema. * Yra visiškai automatizuotos sistemos su COBAS® AmpliPrep/COBAS® TaqMan® ŽIV-1, HCV ir HBV testams. Privalumai * Didelis našumas. * Nuolatinis veikimas maksimaliai padidina laboratorijos produktyvumą. * 4 nepriklausomai valdomi termociklai. * RNR ir DNR amplifikacija ir detekcija per kelias valandas. * Kvantifikavimo standartas ir uždaras mėgintuvėlių formatas nereikalauja vartotojo įsikišimo po to, kai mėginiai įdėti. * Sumažina mėginių kontaminacijos riziką. * Optimizuoja darbo eigą. Prekės būklė: naudota, netikrinta. Komplektacija, kaip parodyta nuotraukose. Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio siuntimo kaina nurodoma atskirai.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Model IM-7010, Year of Manufacture: 2018 Type Measuring Head Model with Transmitted and Reflected Light Image Sensor Monochrome CMOS, 1", 6.6 Megapixels Display LCD Monitor, 10.4" (XGA: 1024 × 768) Lens System Double Telecentric Lens Image-based Measurement Measuring Range Standard Measurement Mode: 200 mm × 200 mm (4 × R50) Precision Measurement Mode: 125 × 125 mm Display Resolution 0.1µm Repeatability (Without Stage Movement) Standard Measurement Mode: ±1 µm Precision Measurement Mode: ±0.5 µm With Stage Movement Standard Measurement Mode: ±2 µm Precision Measurement Mode: ±1.5 µm Measurement Accuracy (±2σ) Without Stage Movement Standard Measurement Mode: ±5 µm*1 Precision Measurement Mode: ±2 µm*2 With Stage Movement Gbodsyc N Egopfx An Hsu Standard Measurement Mode: ± (7 + 0.02 l) µm*3 Precision Measurement Mode: ± (4 + 0.02 l) µm*4 External Remote Input Volt-free input (with and without contact) External Output I.O./N.G./FAIL/MEASURE Photo-MOS Output Rated Load: 24 V DC, 0.5 A ON Resistance: max. 50 mΩ Interface LAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) USB 3.1: 4 ports (rear: 4) USB 2.0 Type A: 2 ports (front: 2) Recording 500GB Hard Drive Illumination System Transmitted Light: Telecentric Transmitted Light Illumination (Green LED) Ring: Reflected Light Illumination (Ring Light) with Four Segments XY Object Stage Travel Range: 100 × 100 mm (motorized) Maximum Load Capacity: 5 kg Z-Axis Travel Range: 75 mm (motorized) Power Supply Input Voltage: 100 to 240 V AC, 50/60 Hz Power Consumption: Max. 430 VA Environmental Resistance Pollution Degree 2 Overvoltage Category II Ambient Temperature: +10 to +35 °C Relative Humidity: 20 to 80% RH (non-condensing) Weight: Approx. 30 kg