Hesse By Sahinler Lakštų Apvalinimo Staklės – 4 Volai pirkti naudotą (93 871)

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Gisdpfxoynm Ehs Ap Ieu Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Godpfsynm Ebsx Ap Ioiu Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations Gjdpfsynm D Rox Ap Ioiu OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Gsdpfxjynmzps Ap Ioiu Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Godpfx Aoynmylep Ijiu Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Gsdpfx Aoynmyfsp Ioiu Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Giodpfx Apeynmx Ij Iju Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €34,200 Leasing rate: €653.22 Shaft diameter: 100 mm Roller diameter: 315 mm Driven rollers: 3 Motor power: 7.5 kW Speed: 7 m/min Flat bar upright (section / min. diameter): 100x20 mm / 800 mm; 30x10 mm Flat bar flat (section / min. diameter): 200x30 mm / 1,200 mm; 160 mm Square steel (section / min. diameter): 60x60 mm / 750 mm; 15x15 mm Round steel (section / min. diameter): Ø 75 mm / 800 mm; Ø 15 mm Tube (section / min. diameter): Ø 125x2.5 mm / 1,400 mm Rectangular tube upright (section / min. diameter): 100x40x4 mm / 1,300 mm; 20x20 mm Rectangular tube square (section / min. diameter): 80x80x5 mm / 1,500 mm; 25x25 mm Angle iron, leg outside (section / min. diameter): 100x100x12 mm / 1,000 mm Angle iron, leg inside (section / min. diameter): 100x100x10 mm / 1,000 mm UPN, leg outside (section / min. diameter): UPN 180 / 900 mm; UPN 30 UPN, leg inside (section / min. diameter): UPN 180 / 1,000 mm; UPN 30 IPN flat (section / min. diameter): IPN 180 / 1,000 mm; IPN 80 Length: 1,465 mm Width: 2,000 mm Height: 1,700 mm Weight: 4,000 kg 3 hydraulically driven rollers Robust welded steel construction Hydraulic adjustment of the two lower rollers Digital display of the lower roller positions on a separate control panel Side straightening rolls adjustable in 3 axes Godpoynmrzofx Ap Ieiu Usable horizontally and vertically Forward and reverse drive Machine and equipment in accordance with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of Origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roll diameter: 390 mm Driven rolls: 3 Motor power: 15 kW Speed: 2/7.5 m/min Flat bar on edge (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x... Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100... Square steel (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20... Round steel (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm... Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube vertical (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3... Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30... Angle steel – outside leg (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; ... Angle steel – inside leg (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; ... UPN – outside leg (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN – inside leg (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg 3 driven rolls (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rolls Hardened universal rolls Side guide rolls adjustable hydraulically in 3 axes 2 speeds Usable horizontal and vertical Mobile control panel Digital display (3 axes) Machine and equipment comply with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! Giedpfjynmruox Ap Iou

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 14–16 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 81 500 € Lizingo įmoka: 1 540,35 € Maks. lakšto storis – statybinis plienas: 8 mm Maks. lakšto storis – nerūdijantis plienas: 5 mm Maks. užlenkimo spindulys: 80 mm Min. užlenkimo spindulys: 10 mm Maks. dugno skersmuo: 4 500 mm Min. dugno skersmuo: 720 mm Maks. užlenkimo aukštis: 95 (R 80) / 35 (R 25) mm Variklis: 11 kW Ilgis: 4 900 mm Plotis: 1 700 mm Aukštis: 2 700 mm Giodpfx Aoyq Svkop Iju Svoris: 4 550 kg Įskaitant užlenkimo volus statybiniam plienui (R25) Įskaitant pjovimo peilį Viena greitis (70 aps./min.) su maksimalios sukimo momento nustatymo galimybe Viršutinio ir apatinio volų pavara su nepriklausomais hidrauliniais varikliais ir planetiniais reduktoriais Galima apdoroti tiek plokščius, tiek išgaubtus dugnus Hidrauliškai reguliuojamas dugno aukštis Pjovimo ir užlenkimo procesas toje pačioje galvoje Šoniniai atraminiai volai Valdymas per jutiklinį ekraną Pasirinkimai, tokie kaip fiksuotas arba reguliuojamas kūginis laikiklis, adapteriai mažiems skersmenims, pjovimo diskai nerūdijančiam plienui arba didesnis greitis... Pagal užklausą.

Būklė: naujas, Condition: New Delivery time: approx. 14–16 weeks from order Country of origin: Turkey Price: €48,000 Leasing rate: €916.80 Max. sheet thickness – mild steel: 6 mm Max. sheet thickness – stainless steel: 4 mm Max. flanging radius: 70 mm Max. blank diameter: 4,000 mm Min. blank diameter: 550 mm Godpfx Apoyq Spwe Ieiu Motor: 8.75 kW Length: 4,250 mm Width: 720 mm Height: 2,000 mm Weight: 2,015 kg Simple operation via mobile control panel with push buttons Manufactured in accordance with EC safety guidelines and CE marking One set of flanging rolls included (radius of your choice) Min. diameter when cutting: 600 mm (with adapter for small diameters: 400 mm) Min. diameter when flanging: 550 mm (with adapter for small diameters: 350 mm) Includes one set of cutting knives Rotational speed: 70 rpm, with adjustable max. torque Upper and lower flanging roll drives via planetary gearbox Hydraulic adjustment for processing flat and dished parts Cutting and flanging performed with the same head Optional features such as fixed or adjustable cone holders, adapters for small diameters, cutting wheels for stainless steel or higher speeds available on request.

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Leasing rate: €305.28 Shaft diameter: 50 - 60 mm Upper roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square steel (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round steel (cross-section / min. diameter): Ø35 mm / 350 mm; Ø10 mm Tube (cross-section / min. diameter): Ø60x2 mm / 600 mm; Ø15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Rectangular tube square (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron outside flange (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron inside flange (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN outside flange (cross-section / min. diameter): UPN 80 / 600 mm, UPN 30 / Giedpfx Apeyn R E Sj Iju UPN inside flange (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / IPN horizontal (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of both lower rollers Hardened universal rollers Lateral guide rollers manually adjustable in 3 axes Can be used horizontally and vertically Digital display for the positions of the lower rollers Machine and equipment according to CE regulations Operating manual in GERMAN and ENGLISH

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €11,800 Leasing rate: €226.56 Gjdpswiq S Nefx Ap Ioiu Shaft diameter: 60 mm Top roller diameter: 215 mm Bottom roller diameter: 215 mm Driven rollers: 3 Motor power: 1.5 kW Speed: 4 m/min Flat bar upright (cross-section / min. diameter): 80x20 mm / 1200 mm; 40x10 mm ... Flat bar flat (cross-section / min. diameter): 120x25 mm / 600 mm; 50x... Square bar (cross-section / min. diameter): 50x50 mm / 800 mm; 20x20 mm ... Round bar (cross-section / min. diameter): Ø 50 mm / 800 mm; Ø 20 mm ... Tube (cross-section / min. diameter): Ø 100x2 mm / 1600 mm; Ø 6 ... Rectangular tube upright (cross-section / min. diameter): 80x40x3 mm / 1400 mm; 40x... Rectangular tube square (cross-section / min. diameter): 70x3 mm / 1600 mm; 40x2 mm ... Angle iron leg outside (cross-section / min. diameter): 70x70x7 mm / 1000 mm; 40x... Angle iron leg inside (cross-section / min. diameter): 70x70x7 mm / 1200 mm; 40x... Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the upper roller Hardened universal rollers Side straightening rollers adjustable on one axis manually Can be used horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment comply with CE regulations Operating manual available in GERMAN and ENGLISH

Būklė: naujas, Gamybos metai: 2026, Condition: New Giodpfx Aewiqm Top Iju Year of manufacture: 2026 Stock number: 090180 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €8,300 Leasing rate: €160.19 In stock: 1 Shaft diameter: 50 mm Top roller diameter: 152 mm Bottom roller diameter: 162 mm Driven rollers: 3 Motor power: 1.1 kW Speed: 4.5 m/min Flat bar, upright (section / min. diameter): 60x10 mm / 600 mm; 20x10 Flat bar, flat (section / min. diameter): 100x15 mm / 600 mm; 50x Square steel (section / min. diameter): 35x35 mm / 600 mm; 15x15 Round steel (section / min. diameter): 35 mm / 600 mm; Ø 20 mm Pipe (section / min. diameter): 70x2 mm / 1200 mm; Ø 25 mm Rectangular tube, upright (section / min. diameter): 70x30x3 mm / 1500 mm; 30x Square tube (section / min. diameter): 50x50x3 mm / 1600 mm; 20x Angle iron, leg outside (section / min. diameter): 50x50x6 mm / 600 mm; 30x3 Angle iron, leg inside (section / min. diameter): 50x50x6 mm / 900 mm; 30x3 Length: 810 mm Width: 950 mm Height: 1500 mm Weight: 500 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of top roller Hardened universal rollers Lateral guide rollers adjustable on one axis manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment in compliance with CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Gamybos metai: 2025, Condition: new Year of manufacture: 2025 Stock number: 090131 Delivery time: prompt, subject to prior sale Country of origin: Turkey Price: €4,700 Leasing rate: €109.71 In stock: 1 unit Shaft diameter: 50 mm Roller diameter: 155 mm Driven rollers: 2 Motor power: 1.5 kW Speed: 4.5 m/min Flat bar vertical (section / min. diameter): 60x10 mm / 500 mm; 40x10 mm Giodpswiq S Ajfx Ap Ieu Flat bar horizontal (section / min. diameter): 100x15 mm / 450 mm; 60x... Square bar (section / min. diameter): 35x35 mm / 900 mm; 20x20 mm Round bar (section / min. diameter): Ø 35 mm / 600 mm; Ø 30 mm Tube (section / min. diameter): Ø 70x2 mm / 1,000 mm; Ø 30 mm Rectangular tube vertical (section / min. diameter): 70x30x2 mm / 1,200 mm; 50x... Rectangular tube square (section / min. diameter): 50x50x3 mm / 1,700 mm; 40x... Angle iron leg outside (section / min. diameter): 50x50x5 mm / 800 mm; 40x4 mm Angle iron leg inside (section / min. diameter): 50x50x6 mm / 1,000 mm; 30x... Length: 1050 mm Width: 750 mm Height: 1450 mm Weight: 390 kg 2 mechanically driven rollers Robust cast steel construction Shafts made of hardened and ground special steel Manual adjustment of the top roller Hardened universal rollers Side guide rollers adjustable on one axis manually Usable horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment conform to CE regulations Operating instructions in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €20,400 Leasing rate: €391.68 Shaft diameter: 80 mm Roller diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min Flat bar upright (section / min. diameter): 100x20 mm / 2000 mm; 80x20 mm Flat bar flat (section / min. diameter): 125x25 mm / 600 mm; 60x5 mm Square steel (section / min. diameter): 45x45 mm / 500 mm; 15x15 mm Round steel (section / min. diameter): Ø 50 mm / 500 mm; Ø 15 mm Pipe (section / min. diameter): Ø 100x2.5 mm / 1,200 mm Rectangular tube upright (section / min. diameter): 80x25x3 mm / 800 mm; 25x1 mm Square tube (section / min. diameter): 70x70x3 mm / 1,300 mm; 25x25x2 mm Angle iron, leg outward (section / min. diameter): 80x80x8 mm / 800 mm; 30x3 mm Angle iron, leg inward (section / min. diameter): 70x70x7 mm / 700 mm; 30x3 mm UPN, leg outward (section / min. diameter): UPN 140 / 1,600 mm; UPN 120 UPN, leg inward (section / min. diameter): UPN 140 / 1,600 mm; UPN 120 IPN lying flat (section / min. diameter): IPN 120 / 600 mm; IPN 80 Godpfx Apewirvve Ieiu Length: 1,450 mm Width: 1,000 mm Height: 1,400 mm Weight: 1,700 kg 3 motor-driven rollers Robust steel welded construction Hydraulic adjustment of both lower rollers Digital display of lower roller positions on a separate control console Side straightening rollers adjustable along 3 axes Can be used horizontally and vertically Forward and reverse operation Machine and equipment compliant with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: New Estimated delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Maximum bending capacity (mild steel): 16 mm Maximum plate thickness without pre-bending at D=5x top roll: 16 mm Maximum plate thickness without pre-bending at D=3x top roll: 13 mm Maximum plate thickness without pre-bending at D=1.5x top roll: 16 mm Maximum plate thickness with pre-bending at D=5x top roll: 14 mm Maximum plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 300 mm Gisdpfx Apsynm Hfj Iju Bottom roll diameter: 300 mm Side roll diameter: 240 mm Maximum opening: 50 mm Working height: 1,140 mm Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rolls PLC control Fully hydraulic drive of the top and bottom rolls (for all four rolls from 30 mm bending capacity) via planetary gears Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop end Mobile control panel Overload protection Operating manuals available in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Top and side sheet supports NC controller IMPORTANT NOTES FOR CONICAL BENDING: Maximum plate thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Gamybos metai: 2025, Būklė: nauja Pagaminimo metai: 2025 Sandėlio numeris: 090086 Pristatymo laikas: iš karto, galimas tarpinis pardavimas Kilmės šalis: Turkija Kaina: 7 400 € Lizingo įmoka: 142,82 €/mėn. Sandėlyje: 1 vnt. Giodpfx Apowiqmmj Ieu Peilio ilgis: 197 mm Lakšto storis (420 N/mm²): 4 mm Lakšto storis (600 N/mm²): 2 mm Eigos dažnis: 20 karto/min Kampas: 90° Variklis: 4 kW Ilgis: 890 mm Plotis: 780 mm Aukštis: 1 115 mm Svoris: 550 kg Hidraulinė pavara Automatinis pjovimo plyšio reguliavimas 2 prispaudimo įtaisai 2 kampu reguliuojami atmušėjai Apsauga iš plexiglaso Pedaļu valdiklis Atliekų surinkimo talpa Įranga atitinka CE direktyvas Eksploatavimo instrukcija vokiečių ir anglų kalbomis

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2002, valdymo tipas: vadovas, automatizacijos lygis: pusiau automatinis, pavaros tipas: elektrinis, ritinėlių skaičius: 3, volelio skersmuo: 90 mm, darbinis plotis: 1 550 mm, volo aukščio reguliavimas: 110 mm, maks. lakšto storis: 3 mm, plieno lakšto storis (maks.): 3 mm, bendras svoris: 600 kg, bendras ilgis: 2 300 mm, bendras plotis: 700 mm, bendras aukštis: 1 150 mm, galia: 1,1 kW (1,50 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Įranga: avarinis stabdymas, grūdinti volai, kojinis nuotolinio valdymo pultas, kūginio lenkimo įrenginys, pasukamas viršutinis volas, AKYAPAK AS 1550x90 Lakštų lenkimo mašina 1550 mm x 2,5 mm, 3 volai /ct2289/ Elektrinė, pedalais valdoma lenkimo mašina. Tvirta, stabili konstrukcija. Viršutinis volas gali būti pasuktas ruošinio išėmimui. Patogus valdymas, tinkama tiek dirbtuvėms, tiek pramonei. Giodpfx Aexmvgksp Iju Gamintojas: AKYAPAK AS 1550 x 90 mm Metai: 2002 Lankstymo ilgis: 1550 mm Lankstymo galia: 2,5 mm Volų skersmuo: 90 mm - SAE 1050 sertifikuoti aukštos stiprumo plieno volai - Vielos grioveliai volų galuose (4/6/9 mm) - Varikliu reguliuojamas galinis volas - Mobilus valdymo pultas su kojiniu pedalu - Preciziškas lenkimas su stabdymo varikliu - Kūginiam lenkimui skirtas įtaisas - Rankinis briaunų lankstymas - Pagrindinė rėmas iš ketaus Lankstymo greitis: 6 m/min Variklio galia: 1,1 kW, 50 Hz, 380 V Vielos griovelių skersmuo: 4/7/10 mm Mašinos matmenys: 2400 x 800 x 1200 mm Svoris: 600 kg

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 810 h, mašinos/transporto priemonės numeris: 22-2261, bendras svoris: 97 500 kg, padavimo jėga X ašis: 2 750 N, padavimo jėga Z ašyje: 3 500 N, įėjimo įtampa: 380 V, Informacija bus pateikta vėliau. Godpjy A Sccjfx Ap Ijiu

Būklė: geras (naudotas), Gamybos metai: 2000, Techniniai duomenys: Gjdpfszbmw Dox Ap Isiu Darbinis plotis: 6100 mm Didžiausias lenkimo pajėgumas: 10,0 mm Didžiausias priešlenkis: 8,0 mm Viršutinio volo skersmuo: 470 mm Šoninių volų skersmuo: 250 mm Grūdinti volai Kūginio lenkimo įranga, pasukant abu šoninius volus Pervežamas valdymo pultas Hidrauliniai atlenkiami guoliai Variklio galia: 31 kW Matmenys (ilgis x plotis x aukštis): apie 8000 x 3200 x 2900 mm Savaiminis svoris: apie 30 t Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašinos būklė — tiek vizualiai, tiek techniškai, tiek pagal susidėvėjimą — atitinka jos amžių; naudotos mašinos parduodamos be jokių garantijų.

Būklė: labai geros būklės (naudotas), Techniniai duomenys: Atnaujinimas 2026 m. Darbo ilgis: 2550 mm Maks. lenkimo galia: 6,0 mm Prilenkimas: 4,0 mm Viršutinio volo skersmuo: 200 mm Apatinio volo skersmuo: 180 mm Hidraulinis atverčiamas guolis Kūginio lenkimo įrenginys Valdymo pultas su skaitmeniniu ekranu Variklio galia: 5,5 kW Matmenys (ilgis x plotis x aukštis): apie 3600 x 1150 x 1250 mm Svoris: apie 4,5 tonos Būklė: Labai gera, atnaujinimas 2026 m. Godpfx Aezbcwmjp Ijiu Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašinos išvaizda, techninė būklė ir nusidėvėjimas atitinka jos amžių; naudotos mašinos parduodamos be jokios garantijos.

Būklė: naudotas, Gamybos metai: 2004, bendras ilgis: 4 400 mm, bendras plotis: 1 300 mm, bendras aukštis: 1 200 mm, Spalva: Pilka Tuščias svoris: 2.500 kg - Pagaminimo metai: 2004 - Dokumentacija prieinama: Ne - CE žymėjimas: Taip - CE sertifikatas: Ne - Serijos numeris: 20440160 - Valdymas: Tradicinis - Pavara: Hidraulinė - Volelių skaičius [vnt.]: 4 - Varomų volelių skaičius [vnt.]: 4 Giedpfx Ajyym Tdjp Iou - Galia [kW]: 5,5 - Maks. lakšto storis [mm]: 4 - Maks. išankstinio lenkimo storis [mm]: 3,5 - Maks. darbinis plotis [mm]: 3100 - Viršutinio volo skersmuo [mm]: 170 - Apatinių volelių skersmuo [mm]: 160 - Pasirinkimai: Skaitmeninis ekranas, kūginis lenkimas - Transportavimo matmenys: 4400mm x 1300mm x 1200mm (ilgis x plotis x aukštis) - Transportinis svoris [kg]: 2500kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumų apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas atgal galimas bet kuriam pramonės sektoriaus įrenginiui Lukas van Rossum

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, Labai gerai išsilaikiusi 4 volų CNC apvalinimo staklės LUNA Modelis: 8344 17/06 Keturių volų pavara CNC valdymas Mylock 100 Valdymo sistema kontroliuoja 4 funkcijas: padavimą, lankstymą, laikymą ir viršutinio volo fiksavimą Maks. darbinis plotis: 1750 mm Maks. lakšto storis: 0,6 mm Pagaminimo metai: 2003 Svoris: 700 kg Godex Nw N Ispfx Ap Isiu Pagaminta Švedijoje

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 10 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 7200 € Lizingo įmoka: 138,96 € Maks. lakšto storis – konstrukcinis plienas: 4 mm Iškyša: 200 mm Bangos ilgis: 300 nm Įrankių skaičius: 4 vnt. Veleno skersmuo: 126 mm Sukimosi greitis: 10 aps./min Ilgis: 1475 mm Plotis: 550 mm Aukštis: 1200 mm Svoris: 460 kg Savaime stabdantis reduktorinis variklis Pėdos pedalas pirmyn/atgal funkcijai Reguliuojamas apatinis velenas Plieniniai velenai su bronziniais guoliais 4 volų rinkiniai Stovas Eksploatacijos instrukcija VOKIEČIŲ arba ANGLŲ kalba Įranga atitinka CE reikalavimus ALTERNATYVA (KAINA PAGAL UŽKLAUSĄ): HIBKS 4,0 variantas su hidrauliniu viršutinio volo reguliavimu Gedoynm Ngepfx Ap Isiu