Hesse By Sahinler Lakštų Apvalinimo Staklės – 4 Volai pirkti naudotą (93 871)

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 24 500 € Lizingo įmoka: 470,4 € Lenkimo ilgis: 1550 mm Maks. lenkimo talpa (statybinis plienas): 4,5 mm Maks. lakšto storis be įlenkimo (statybinis plienas): 4,5 mm Maks. lakšto storis su įlenkimu (statybinis plienas): 3,5 mm Maks. lakšto storis be įlenkimo, kai D = 5x viršutinis volas: 4,5 mm Maks. lakšto storis be įlenkimo, kai D = 1,5x viršutinis volas: 3,5 mm Maks. lakšto storis su įlenkimu, kai D = 5x viršutinis volas: 3,5 mm Maks. lakšto storis su įlenkimu, kai D = 1,5x viršutinis volas: 2,5 mm Viršutinio volo skersmuo: 130 mm Apatinio volo skersmuo: 130 mm Šoninio volo skersmuo: 130 mm Vyniojimo greitis: 5 m/min Variklis: 2,2 + 1,1 kW Ilgis: 3300 mm Plotis: 1150 mm Aukštis: 1110 mm Svoris: 2370 kg Motorizuotas volų pavara Viršutinis ir apatinis volai varomi Hidraulinis šoninių volų reguliavimas 3 skaitmeniniai indikatoriai Hidraulinis atlenkiamas guolis Grūdinti volai Kūginio lenkimo įtaisas Naudojimosi instrukcija vokiečių arba anglų kalba PASIRINKTINAI (KAINOS PAGAL UŽKLAUSĄ): Gedpfxoynmwdo Ap Ieiu Viršutinis atramos taškas Šoninė atrama Kintamas greitis NC valdymas

Būklė: naujas, Būklė: nauja Pristatymo terminas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 43 000 € Lizingo įmoka: 821,3 € Lenkimo ilgis: 2050 mm Maks. lenkimo galia (statybinis plienas): 10 mm Maks. lakšto storis be papildomo lenkimo (statybinis plienas): 10 mm Maks. lakšto storis su papildomu lenkimu (statybinis plienas): 8 mm Maks. lakšto storis be papildomo lenkimo, kai D=5x viršutinio volo: 10 mm Maks. lakšto storis be papildomo lenkimo, kai D=1,5x viršutinio volo: 8 mm Maks. lakšto storis su papildomu lenkimu, kai D=5x viršutinio volo: 8 mm Maks. lakšto storis su papildomu lenkimu, kai D=1,5x viršutinio volo: 6 mm Viršutinio volo skersmuo: 200 mm Apatinio volo skersmuo: 200 mm Šoninio volo skersmuo: 180 mm Volų sukimosi greitis: 6 m/min Ilgis: 3850 mm Plotis: 1350 mm Aukštis: 1290 mm Svoris: 3750 kg Variklinis volų pavara Varomi viršutinis ir apatinis volai Hidraulinis šoninių volų poslinkis 3 skaitmeniniai indikatoriai Hidraulinis atverčiamas guolis Gijdpfx Aoyb S Arep Isu Grūdinti volai Kūginio lenkimo įtaisas Eksploatacijos instrukcija VOKIEČIŲ arba ANGLŲ kalba PAPILDOMOS GALIMYBĖS (KAINOS PAGAL UŽKLAUSĄ): Viršutinė atrama Šoninė atrama Kintamas greitis NC valdymas

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 38 000 € Lizingo įmoka: 725,8 € Lenkimo ilgis: 2050 mm Maks. lenkimo galia (statybinis plienas): 8 mm Maks. lakšto storis be išankstinio lenkimo (statybinis plienas): 8 mm Maks. lakšto storis su išankstiniu lenkimu (statybinis plienas): 6 mm Gijdsyb S Afjpfx Ap Iju Maks. lakšto storis be išankstinio lenkimo prie D=5x viršutinio volo: 8 mm Maks. lakšto storis be išankstinio lenkimo prie D=1,5x viršutinio volo: 6 mm Maks. lakšto storis su išankstiniu lenkimu prie D=5x viršutinio volo: 6 mm Maks. lakšto storis su išankstiniu lenkimu prie D=1,5x viršutinio volo: 4 mm Viršutinio volo skersmuo: 180 mm Apatinio volo skersmuo: 180 mm Šoninio volo skersmuo: 150 mm Volų darbinis greitis: 5 m/min Ilgis: 3850 mm Plotis: 1350 mm Aukštis: 1290 mm Svoris: 3300 kg Varomas volų pavaras Varomi viršutinis ir apatinis volai Hidraulinis šoninių volų prispaudimas 3 skaitmeniniai ekranai Hidraulinis atvirtimo guolis Grūdinti volai Kūginio lenkimo įtaisas Eksploatacijos instrukcija VOKIEČIŲ arba ANGLŲ kalba

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 21 800 € Lizingo įmoka: 418,56 € Lenkimo ilgis: 1270 mm Maks. lenkimo galia – konstrukcinis plienas: 5 mm Maks. lakšto storis be išankstinio lenkimo – konstrukcinis plienas: 5 mm Maks. lakšto storis su išankstiniu lenkimu – konstrukcinis plienas: 4 mm Maks. lakšto storis be išankstinio lenkimo, kai D=5x viršutinio volo skersmuo: 5 mm Maks. lakšto storis be išankstinio lenkimo, kai D=1,5x viršutinio volo skersmuo: 4 mm Maks. lakšto storis su išankstiniu lenkimu, kai D=5x viršutinio volo skersmuo: 4 mm Maks. lakšto storis su išankstiniu lenkimu, kai D=1,5x viršutinio volo skersmuo: 3 mm Viršutinio volo skersmuo: 130 mm Apatinio volo skersmuo: 130 mm Šoninės volo skersmuo: 130 mm Volų sukimosi greitis: 5 m/min Variklis: 2,2 + 1,1 kW Ilgis: 3020 mm Plotis: 1150 mm Aukštis: 1110 mm Svoris: 2150 kg Varikliu varomas volų pavara Viršutinis ir apatinis volas varomi Hidraulinis šoninių volų padavimo reguliavimas 3 skaitmeniniai indikatoriai Hidraulinis atlenkiamas laikiklis Grūdinti volai Giodsyb Sz Uspfx Ap Ieu Kūginio lenkimo įtaisas Eksploatacijos instrukcija lietuvių arba anglų kalba PASIRINKIMAI (KAINOS PAGAL UŽKLAUSIMĄ): Viršutinis atramos įtaisas Šoninis atramos įtaisas Kintamas greitis NC valdymas

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 29000 € Lizingo įmoka: 553,9 € Lenkimo ilgis: 2050 mm Maks. lenkimo galia - konstrukcinis plienas: 4 mm Didž. lakšto storis be išlenkimo, kai D = 5 x viršutinio volo skersmuo: 4 mm Didž. lakšto storis be išlenkimo, kai D = 1,5 x viršutinio volo skersmuo: 3 mm Didž. lakšto storis su išlenkimu, kai D = 5 x viršutinio volo skersmuo: 3 mm Didž. lakšto storis su išlenkimu, kai D = 1,5 x viršutinio volo skersmuo: 2 mm Viršutinio volo skersmuo: 130 mm Apatinio volo skersmuo: 130 mm Šoninio volo skersmuo: 130 mm Vyniojimo greitis: 5 m/min Variklis: 2,2 + 1,1 kW Ilgis: 3800 mm Plotis: 1150 mm Aukštis: 1110 mm Svoris: 2450 kg Varomas volų pavaros varikliu Gisdpfsyb Sy Dex Ap Iou Viršutinis ir apatinis volai varomi Hidraulinis šoninių volų pozicionavimas 3 skaitmeniniai ekranai Hidraulinis apverčiamas guolis Grūdinti volai Kūginio lenkimo įranga Eksploatavimo instrukcijos vokiečių arba anglų kalba PASIRINKTINAI (KAINOS PAGAL UŽKLAUSĄ): Viršutinis palaikymas Šoninis palaikymas Kintamas greitis NC valdymas

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €28,450 Leasing rate: €543.40 Bending length: 1,550 mm Gisdpfx Asyb Szhjp Iou Max. bending capacity - mild steel: 7 mm Max. plate thickness (without pre-bending) at D = 5x upper roll: 7 mm Max. plate thickness (without pre-bending) at D = 1.5x upper roll: 4.5 mm Max. plate thickness (with pre-bending) at D = 5x upper roll: 4.5 mm Max. plate thickness (with pre-bending) at D = 1.5x upper roll: 3.5 mm Upper roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 3,750 mm Width: 960 mm Height: 1,100 mm Weight: 2,500 kg 4 rolls Upper roll drive via hydraulic motor and planetary gearbox, lower roll drive via gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: (Delivery time with options approx. 10 weeks) Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €134,000 Giedpfxoypbquo Ap Ieu Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity – structural steel: 25 mm Max. sheet thickness without prebending at D=5x top roll: 25 mm Max. sheet thickness without prebending at D=3x top roll: 20 mm Max. sheet thickness without prebending at D=1.5x top roll: 20 mm Max. sheet thickness with prebending at D=5x top roll: 20 mm Max. sheet thickness with prebending at D=1.5x top roll: 16 mm Top roll diameter: 360 mm Bottom roll diameter: 360 mm Side roll diameter: 270 mm Maximum opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive of the top and bottom roll (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control console Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and lateral sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – steel: 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 6 mm Max. sheet thickness with pre-bending at D=5x top roll: 6 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Giedpfxjypbqno Ap Iju Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg Features: - 4 rolls - PLC - Fully hydraulic drive for top and bottom rollers (for all four rollers from 30 mm bending capacity) via planetary gearbox - Hydraulic adjustment of side rolls with electronic synchronization - Hydraulic adjustment of bottom roll with mechanical synchronization - Adjustable clamping pressure - Variable rolling speed - Hardened rolls - Cone bending device - Hydraulic drop-end - Mobile control console - Overload protection - Operating manual in GERMAN and ENGLISH - Equipment in accordance with CE regulations OPTIONS: - Upper and side sheet supports - NC control IMPORTANT NOTES ON CONE ROLLING: - Max. sheet thickness is 50% of nominal capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls recommended

Būklė: naujas, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €95,000 Lease rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without prebending (mild steel): 12 mm Max. sheet thickness with prebending (mild steel): 8 mm Max. sheet thickness without prebending at D=5x top roll: 13 mm Max. sheet thickness without prebending at D=1.5x top roll: 10 mm Max. sheet thickness with prebending at D=5x top roll: 10 mm Max. sheet thickness with prebending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Gijdpfxoypbqhe Ap Iju Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive for top and bottom roll (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Device for conical bending Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of nominal capacity Cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2050 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness with pre-bending (mild steel): 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 13 mm Giodpfx Aoypbqbop Ieu Max. sheet thickness without pre-bending at D = 1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 5x top roll: 10 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3830 mm Width: 1160 mm Height: 1200 mm Weight: 5000 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gears Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Configuration according to CE regulations OPTIONS: Upper and lateral sheet supports NC control system IMPORTANT POINTS FOR CONE BENDING: The maximum sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Bending length: 2000 mm Max. bending capacity - mild steel: 11 mm Gsdpfx Aoypbp Rop Ioiu Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Numerical control: Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclined lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous rolling and support movement Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for higher precision Infinitely variable roll movement speed Infinitely variable rotation speed Prepared for retrofit of supports (up to 5 axes) Prepared for retrofit of loading/unloading stations Prepared for retrofit of CNC controls Extra-large, double-hinged drop-end bearing Electronic parallelism system for roll synchronization Hydraulic upper roll lifting (for models with top roll diameter from 205 mm) Double linear guidance for movement of lower rolls Ultra-wide roll blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Centralized lubrication system Pressure gauge for constant pinch roll monitoring Extra torque and special braking system Safety pull cord with emergency stop Equipped according to CE regulations OPTION: CNC control Siemens PSG-Absolute with 15" touchscreen (automatic sequence calculation for simple and complex shapes)

Būklė: naujas, Condition: new Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2550 mm Max. bending capacity – mild steel: 15 mm Max. sheet thickness without pre-bending at D=5x upper roll: 15 mm Max. sheet thickness without pre-bending at D=3x upper roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 12 mm Max. sheet thickness with pre-bending at D=5x upper rolls: 12 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 10 mm Upper roll diameter: 270 mm Lower roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1155 mm Motor power: 15 kW Length: 4760 mm Width: 1660 mm Height: 1155 mm Weight: 8,950 kg 4 rolls PLC Fully hydraulic drive of upper and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side sheet supports Gjdpfjypbp Dex Ap Ieiu NC control IMPORTANT POINTS WHEN CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: geras (naudotas), Gamybos metai: 1998, valdymo tipas: NC valdymas, ritinėlių skaičius: 4, apatinio volelio skersmuo: 540 mm, viršutinio volo skersmuo: 560 mm, šoninio volelio skersmuo: 420 mm, volelio skersmuo: 440 mm, vėjo ilgis: 3 100 mm, bendras svoris: 45 000 kg, bendras ilgis: 8 700 mm, bendras plotis: 2 900 mm, bendras aukštis: 3 075 mm, galia: 81 kW (110,13 AG), Minimum bending diameter: 640 mm Press force against upper roll: 5,800 kN Cone bending device Centralized lubrication system Equipped for roll change (quick-change system) Roll width: 3,100 mm Sheet thickness at 3 x upper roll Ø: 50 mm Sheet thickness at 5 x upper roll Ø: 60 mm Sheet thickness for pre-bending: 40 mm Upper roll Ø: 560 + 440 mm Lower roll Ø: 540 mm Side roll Ø: 420 mm Number of rolls: 4 Giedezbqquepfx Ap Iou Bending speed: 0–6 Lower roll adjustment: 0–200 mm/min. Side roll adjustment: 0–500 mm/min. Number of driven rolls: 2 Power: 81 kW Length: 8,700 mm Width: 2,900 mm Height: 3,075 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend that you verify all important details.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, ritinėlių skaičius: 4, apatinio volelio skersmuo: 280 mm, viršutinio volo skersmuo: 200 mm, šoninio volelio skersmuo: 280 mm, vėjo ilgis: 3 000 mm, maks. lakšto storis: 6 mm, bendras svoris: 7 250 kg, bendras ilgis: 6 000 mm, bendras plotis: 2 000 mm, bendras aukštis: 2 000 mm, galia: 6 kW (8,16 AG), 4 volų apvalinimo staklės HAEUSLER - VRM-HY MACH-ID 9604 Giodpfjy Expuox Ap Iju Gamintojas: HAEUSLER Tipas: VRM-HY Valdymas: HAEUSLER CNC Pagaminimo metai: 1997 Vientiso volo plotis: 3000 mm Lakšto storis prie 3x viršutinio volo Ø: 4 mm Lakšto storis prie 5x viršutinio volo Ø: 6 mm Lakšto storis prie įlenkimo: 3 mm Viršutinio volo Ø: 200 mm Apatinio volo Ø: 280 mm Šoninių volų Ø: 280 mm Volų skaičius: 4 Lenkimo greitis: 0–5 Apatinio volo reguliavimas: 0–200 mm/min. Šoninio volo reguliavimas: 0–200 mm/min. Varomų volų skaičius: 2 Galia: 6 kW Ilgis: 6000 mm Plotis: 2000 mm Aukštis: 2000 mm Svoris: 7250 kg Atkreipkite dėmesį: informacija šiame puslapyje surinkta pagal mūsų geriausias žinias ir, kiek galima, iš gamintojo. Informacija pateikiama sąžiningai, tačiau tikslumas negarantuojamas. Todėl tai nėra pasiūlymas ar sutarties sąlygos. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, mašinos/transporto priemonės numeris: 25498, apatinio volelio skersmuo: 320 mm, viršutinio volo skersmuo: 320 mm, šoninio volelio skersmuo: 260 mm, darbinis plotis: 2 070 mm, maks. lakšto storis: 25 mm, TECHNINĖS DETALĖS Lakšto plotis: 2.070 mm Lakšto storis: 25 mm Lenkimo aukštis: 18 mm Viršutinio volo skersmuo: 320 mm Šoninių volų skersmuo: 260 mm Apatinio volo skersmuo: 320 mm STAKLIŲ DETALĖS Bendras galios poreikis: 26 kW Matmenys ir svoris Užimama erdvė: apie 4.700 x 2.000 x 2.200 mm Staklių svoris: apie 8.100 kg ĮRANGA Gijdpfx Apsygw Iko Isu hidraulinis šoninių volų pritraukimas kūginio lenkimo įrenginys 2 varomieji volai grūdinti volai hidraulinis atverčiamas guolis judanti valdymo pultas kojinis jungiklis saugos įranga CE ženklas

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x upper roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg Gijdpfxeyb Sz Ie Ap Isu 4 rolls Upper roll drive via hydromotor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2550 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Lower roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4900 mm Width: 1150 mm Height: 1250 mm Weight: 4600 kg 4 rolls Top roll driven by hydromotor and planetary gear, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic upper roll unloading Hydraulic swing-out bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Gisdpfx Apeyb Sywo Iju The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity - mild steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Godpfoyb Sydex Ap Ieiu Hydraulic drop-end 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Continuously variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of rated capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Lead time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness (without pre-bending at D=5x top roll): 6 mm Max. plate thickness (without pre-bending at D=1.5x top roll): 4 mm Max. plate thickness (with pre-bending at D=5x top roll): 4 mm Max. plate thickness (with pre-bending at D=1.5x top roll): 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4250 mm Width: 960 mm Height: 1100 mm Weight: 2800 kg 4 rollers Top roll driven by hydraulic motor and planetary gear, bottom roll driven by gear and cardan shaft Hydraulic adjustment for bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Godpfx Apoyb Szbo Ieiu Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum plate thickness is 50% of nominal capacity Conical length must be max. 30% or exceed 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Gisdpjyb Sy Rofx Ap Iju Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONE BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2050 mm Max. bending capacity – structural steel: 11 mm Max. sheet thickness without pre-bending at D=5× top roll: 11 mm Max. sheet thickness without pre-bending at D=1.5× top roll: 9 mm Max. sheet thickness with pre-bending at D=5× top roll: 9 mm Max. sheet thickness with pre-bending at D=1.5× top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 4080 kg 4 rolls Top roll powered by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Gijdpfx Aoyb Szujp Iju Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2,550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,170 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Gjdoyb Sykjpfx Ap Ieiu Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €10,800 Leasing rate: €207.36 Shaft diameter: 35 mm Top roller diameter: 137 mm Bottom roller diameter: 137 mm Driven rolls: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar upright (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar flat (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø 22 mm / 200 mm Tube (cross-section / min. diameter): Ø 40x1.5 mm / 500 mm Rectangular tube upright (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Rectangular tube square (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle iron leg outwards (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle iron leg inwards (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rolls (with brake motor) Hardened and ground shafts Hydraulic adjustment of both lower rolls Usable horizontally and vertically Standard roller set Godoynnhkspfx Ap Ioiu Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2,550 mm Max. bending capacity - mild steel: 25 mm Max. sheet thickness without pre-bending at D = 5x top roll: 25 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 16 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,500 mm Width: 2,000 mm Height: 1,900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment for bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of nominal capacity Godpfxsynm Euj Ap Ieiu The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg Gijdpfx Aoynm Enjp Iou 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended