Davi Plieno Valcavimo Staklės pirkti naudotą (51 853)

Būklė: naujas, Ostas 4-čių volų apvali lenkimo staklės 4R OHS 3070 x 250 Hidraulinis šoninių volų pastūmimas 3 skaitmeniniai indikatoriai Hidrauliškai atverčiama guolio pusė Grūdinti volai Kūginio lenkimo įtaisas Atskiras valdymo pultas Volų ilgis: 3070 mm Viršutinio volo skersmuo: 250 mm Šoninių volų skersmuo: 200 mm Variklių bendra galia: 7,5 + 1,5 kW Svoris: 9800 kg Kdjdpfjyaqmaex Af Hor Matmenys (mm): 5050 x 1550 x 1470 (I x P x A) Lankstymo techniniai duomenys 9 mm prie mažiausio vidinio skersmens (5 x viršutinis volas) 7 mm prie mažiausio vidinio skersmens (1,5 x viršutinis volas) Pakreipimo techniniai duomenys 7 mm prie mažiausio vidinio skersmens (5 x viršutinis volas) 5 mm prie mažiausio vidinio skersmens (1,5 x viršutinis volas) Visi lenkimo pajėgumai apskaičiuoti pagal 250 N/mm² takumo ribą Medžiaga (ST 37 – ST 42 konstrukcinis plienas)

Būklė: geras (naudotas), 3 volų lakštų lenkimo staklės Tipas R55 Naudojimo ilgis 1020 mm Kdedpfx Afey Rx Dcs Hjr Maksimalus lakšto storis 1,25 mm Gera, pilnai veikianti būklė.

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €4,900 Leasing rate: €109.71 Bending length: 1,050 mm Max. bending capacity – mild steel: 3 mm Max. sheet thickness for edge bending – mild steel: 2 mm Top roll diameter: 90 mm Length: 2,080 mm Kedpewirv Nsfx Af Hedr Width: 700 mm Height: 1,250 mm Weight: 410 kg 3 rollers Asymmetrical roller arrangement 2 rollers driven via hand crank Rear roll adjustment with handwheel Wire grooves on lower and rear rollers Swing-out top roll Conical bending device Operating instructions in GERMAN

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 10 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 3400 € Kdjdoynndrepfx Af Hor Lenkimo ilgis: 1270 mm Maks. lenkimo talpa – konstrukcinis plienas: 1,2 mm Viršutinio volo skersmuo: 68 mm Variklio galia: 1,5 kW Ilgis: 1610 mm Plotis: 700 mm Aukštis: 1160 mm Svoris: 385 kg 3 volai Asimetrinė volų išdėstymas – su išankstiniu lenkimu Vielos grioveliai apačioje ir galiniame vole Apatinio volo reguliavimas su centrine svirtimi – su krumpliaračio pavara Stovas Eksploatavimo instrukcija VOKIEČIŲ arba ANGLŲ kalba

Būklė: naujas, Condition: New Lead time: approx. 10 weeks from order Country of origin: Turkey Price: €31,600 Leasing rate: €603.56 Bending length: 2050 mm Max. bending capacity - mild steel: 6 mm Max. plate thickness (without pre-bending at D=5x top roll): 6 mm Max. plate thickness (without pre-bending at D=1.5x top roll): 4 mm Max. plate thickness (with pre-bending at D=5x top roll): 4 mm Max. plate thickness (with pre-bending at D=1.5x top roll): 3 mm Top roll diameter: 150 mm Lower roll diameter: 150 mm Side roll diameter: 130 mm Rolling speed: 1.5 / 6 m/min Motor power: 4 kW Length: 4250 mm Width: 960 mm Height: 1100 mm Weight: 2800 kg 4 rollers Top roll driven by hydraulic motor and planetary gear, bottom roll driven by gear and cardan shaft Hydraulic adjustment for bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support Kdedpfoyb Szbex Af Hor NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum plate thickness is 50% of nominal capacity Conical length must be max. 30% or exceed 60% of roll length Hardened rolls are recommended

Būklė: geras (naudotas), Trijų ritinių lenkimo staklės KNUTH KRM 12/2,5, Nr. 121008, pagamintos 2000 m., ritinių ilgis – 125 cm. Kdedeznl Aqjpfx Af Hsr

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Kdodpfsynmzpex Af Her Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, Four-roll Plate Bending Machine Make: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Manufacturer: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2,050 mm Roller geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side rolls diameter: 165 mm Bending force on top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3,500 x W 1,200 x H 1,100 mm Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full width): 8 mm Minimum bending diameter: 1,125 mm At material yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full width): 6 mm Minimum bending diameter: 295 mm At material yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full width): 6 mm Minimum bending diameter: 1,125 mm At material yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full width): 5 mm Minimum bending diameter: 295 mm At material yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half width): 10 mm Minimum bending diameter: 1,125 mm At material yield strength: 260 N/mm² Features - Double linear guidance system for roller movement - Extra-wide bearing blocks - MCS double bearing system for roller rotation Kdedpfxezguume Af Her - Extra heavy-duty, double-supported swinging bearing - Electronic Parallelism System EPS - Hardened rolls for high wear resistance and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A demonstration under power is possible at any time in our showroom.

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2,550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,170 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Ksdpfx Ajyb Syksf Hjdr Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €49,900 Leasing rate: €953.09 Bending length: 2050 mm Max. bending capacity - mild steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top rolls: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1470 mm Weight: 5450 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gearwheel and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end 2 working speeds Overload protection Kjdpfx Ajyb Sydof Hedr Mobile control panel Equipment in accordance with CE regulations OPTIONS: Continuously variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: Maximum sheet thickness is 50% of rated capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naudotas, viršutinio volo skersmuo: 160 mm, darbinis plotis: 1 050 mm, maks. lakšto storis: 10 mm, Motorized Roller Epart 1050 x 10 mm Brand: Epart Type: Motorized Capacity: 1050mm x 10mm Top roller diameter: 160mm Kodpevlxyzjfx Af Hodr Motorized rear roller Extension of supports for roller mounting Pedal-operated control Perimeter safety via limit switch Front roller separation adjusted by handwheel

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €55,900 Leasing rate: €1,056.51 Bending length: 3,100 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x upper roll: 8 mm Max. sheet thickness without pre-bending at D=1.5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=5x upper roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x upper roll: 5 mm Upper roll diameter: 245 mm Lower roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Kdjdpfoyb Sz Iox Af Hsr Length: 5,350 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,850 kg 4 rolls Upper roll drive via hydromotor and planetary gearbox, lower roll drive via gear and cardan shaft Hydraulic adjustment of the lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of upper roll Hydraulic drop-end 2 working speeds Overload protection Movable control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Kdjdpfx Asynm Ehof Hjr - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €46,300 Leasing rate: €884.33 Bending length: 2050 mm Max. bending capacity – structural steel: 11 mm Max. sheet thickness without pre-bending at D=5× top roll: 11 mm Max. sheet thickness without pre-bending at D=1.5× top roll: 9 mm Max. sheet thickness with pre-bending at D=5× top roll: 9 mm Max. sheet thickness with pre-bending at D=1.5× top roll: 7 mm Top roll diameter: 220 mm Bottom roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 4080 kg 4 rolls Top roll powered by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Conical bending device Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Kodpjyb Szusfx Af Hedr Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €48,100 Leasing rate: €918.71 Bending length: 2550 mm Max. bending capacity – structural steel: 9 mm Max. sheet thickness without pre-bending at D=5x top roll: 9 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 7 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 5 mm Top roll diameter: 220 mm Lower roll diameter: 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Kdsdpfx Asyb Sywjf Her Length: 4900 mm Width: 1150 mm Height: 1250 mm Weight: 4600 kg 4 rolls Top roll driven by hydromotor and planetary gear, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic upper roll unloading Hydraulic swing-out bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable roll speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,000 Leasing rate: €1,077.30 Bending length: 2,550 mm Max. bending capacity - structural steel: 13 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,550 mm Weight: 6,800 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable roll speed Kodoyb Sy Rjpfx Af Hsdr Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES ON CONE BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1992, mašinos/transporto priemonės numeris: 11/10575, darbinis plotis: 3 000 mm, maks. lakšto storis: 16 mm, TECHNINĖ INFORMACIJA Lakšto plotis: 3 000 mm Lakšto storis: 16 mm Kdedpfxjzapqws Af Hor Valdymas: konvencinis ĮRENGINIO DUOMENYS Nominali srovė: 63 A Įtampa: 380 V

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, vynų diametras: 830 mm, Išmontavimas numatomas 35-ąją kalendorinę savaitę. Iki tol pirkėjas gali apžiūrėti įrenginį, kol jis veikia Lietuvoje. Visiškai automatinė kraštų apdailinimo linija, kurią sudaro šios mašinos: HOMAG PROFI KAL330/9/A3/WZ (pagaminta 2013 m.) HOMAG PROFI KAL370/8/A3/WZ (pagaminta 2016 m.) Pašarimo stalas HOMAG PROFI TBL100/20/30/F (pagaminta 2013 m.) Perkrovimo sistemos skersinis konvejeris HOMAG POWER TWL410/25/LQ (pagaminta 2016 m.) TECHNINĖS CHARAKTERISTIKOS Kraštų apdailinimo mašinos HOMAG PROFI KAL330/9/A3/WZ ir PROFI KAL370/8/A3/WZ Detalės plotis be krašto, kai detalės storis yra 12–22 mm: min. 60 mm (priklauso nuo detalės ilgio) Detalės plotis be krašto, kai detalės storis yra 23–60 mm: min. 100 mm (priklauso nuo detalės ilgio) Detalės iškyša: 30 mm Detalės storis: 12–60 mm Krašto aukštis: maks. detalės storis + 4 mm Krašto medžiagos plotis rilyje: 0,3–3 mm PVC krašto medžiagos aukštis: maks. 135 mm Faneruotės krašto medžiagos aukštis: maks. 100 mm Rilės skersmuo: maks. 830 mm Pašarimo stalas HOMAG PROFI TBL100/20/30/F Ritinių skersmuo: 54 mm Ritinių atstumas: apie 60 mm Detalės ilgis: 240–2.500 mm Detalės plotis: 120–3.000 mm Perkrovimo sistemos skersinis konvejeris HOMAG POWER TWL410/25/LQ Ritinių skersmuo: 64 mm Ritinių atstumas: 110 mm Detalės ilgis: 240–2.500 mm Detalės plotis: min. 240 mm Detalės storis: 8–60 mm Detalės svoris: maks. 80 kg ĮRANGA Atidarymo tipo sujungimo-pjaustymo blokas abiejose kraštų apdailinimo mašinose Klijų modulis A3 abiejose kraštų apdailinimo mašinose Atidarymo tipo apdirbimo blokai abiejose kraštų apdailinimo mašinose Apdailos blokas FA11 HOMAG PROFI KAL330 Apdailos blokas FA21 HOMAG PROFI KAL370 Fiksuota atraminė pusė kairėje pašarimo stalo pusėje Transportavimo ritiniai pašarimo stale Kdjdpfxsztazfj Af Hor Šoninis konvejeris pašarimo stalo pusėje Elektropneumatiškai valdoma skersinė apsaugos sistema pašarimo stalo pusėje Rankiniu būdu, naudojant skaitiklį, reguliuojama įėjimo apsaugos sistema Rinkinys smulkioms detalėms Integruotas oro pagalvės stalas Fiksuota atraminė pusė kairėje perkrovimo sistemos skersinio konvejerio įėjimo ir išėjimo pusėje Įėjimo ritinių sistema su konvejeriu ir skersiniu judėjimu Valdomas skersinis konvejeris įėjimo pusėje Išėjimo ritinių sistema Valdomas skersinis konvejeris išėjimo pusėje Elektropneumatiškai valdoma atraminė apsaugos sistema Šoninis transportavimo konvejeris Rankiniu būdu reguliuojama detalės iškyša.

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Kjdsynmx Ijpfx Af Hjdr IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Kdsdpfx Ajynm Enof Hjr Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Kodeynmyfjpfx Af Hsdr Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Kedpfx Afoynm D Re Hedr Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1998, valdymo tipas: NC valdymas, automatizacijos lygis: pusiau automatinis, pavaros tipas: hidraulinis, valdiklių gamintojas: Siemens, valdiklio modelis: Simatic OP7, ritinėlių skaičius: 4, apatinio volelio skersmuo: 470 mm, viršutinio volo skersmuo: 530 mm, šoninio volelio skersmuo: 400 mm, volelio skersmuo: 530 mm, vėjo ilgis: 3 100 mm, darbinis plotis: 3 000 mm, darbinio aukščio: 2 000 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 65 mm, nerūdijančio plieno lakšto storis (maks.): 50 mm, bendras svoris: 40 000 kg, bendras ilgis: 6 000 mm, bendras plotis: 2 900 mm, bendras aukštis: 2 900 mm, galia: 55 kW (74,78 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, skaitmeninių ekranų skaičius: 4, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kūginio lenkimo įrenginys, pasukamas viršutinis volas, Plokščių valcavimo staklės, darbinis pajėgumas 3000x50 mm, Davi modelis MCB3053 Hidraulinės 4-vinių plokščių valcavimo staklės, pagaminimo metai 1998 Plokštės plotis: 3000 mm Valcavimo storis: 50 mm Išankstinis briaunų lenkimas: 40 mm Valcavimo plotis ant volų: 3100 mm Viršutinio volo diametras: 530 mm Apatinio volo diametras: 470 mm Šoninių volų diametras: 400 mm Galia: 70 AG elektra, hidraulinis blokas, įtampa 380V/50Hz - Komplektacija: - Grūdintas visų 4 volų paviršius - Koninių paviršių lenkimo priedas – grūdintas kūginiam lenkimui - Elektroninis valdymo pultas su skaitmeniniu volų padėties indikatoriumi - Siemens Simatic OP7 valdymo konsolė - NC programavimas automatiniam valcavimui Centriniai volai hidrauliškai varomi per ašinius reduktorius Reguliuojamas briaunų spaudimas išankstiniam lenkimui Atidaroma galinė plokštės dalis apvalių ruošinių iškrovimui Pakartotinio valcavimo sistema apskritumo kalibravimui Įdiegta saugos ir avarinė sistema Originalūs eksploatavimo ir priežiūros vadovai Matmenys: 6000x2900 x h 2900 mm, svoris 40 000 kg Kdedpfx Afey D Ngzs Hjr

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Kedjynmylopfx Af Hjdr Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, valdymo tipas: NC valdymas, automatizacijos lygis: pusiau automatinis, pavaros tipas: hidraulinis, valdiklio modelis: 4 axis digital readout, ritinėlių skaičius: 4, apatinio volelio skersmuo: 350 mm, viršutinio volo skersmuo: 370 mm, volelio skersmuo: 370 mm, vėjo ilgis: 2 550 mm, darbinis plotis: 2 500 mm, darbinio aukščio: 1 900 mm, maks. lakšto storis: 40 mm, bendras svoris: 15 000 kg, bendras ilgis: 5 300 mm, bendras plotis: 2 100 mm, bendras aukštis: 2 400 mm, galia: 25 kW (33,99 AG), įėjimo įtampa: 380 V, skaitmeninių ekranų skaičius: 4, Įranga: avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, grūdinti volai, kūginio lenkimo įrenginys, pasukamas viršutinis volas, 4 volų lakštų valcavimo staklės Faccin modelis hidraulinis 4HEL2,5 30/25, pagaminimo metai 1999 Volarų judėjimas ant linijinių kreiptuvų Lakšto plotis 2500 mm Lakšto storis 30 mm Valcavimo galimybės 2500 x 30 mm Kdsdpfozd Sw Tex Af Hor Išankstinis lenkimas 2500 x 25 mm Viršutinio volo skersmuo 370 mm Apatinio volo skersmuo 350 mm Darbinis volų paviršius 2550 mm Įtampa 380/50, įrengta galia 25KW Įdiegta komplektacija 4 volų paviršius grūdintas Kūginis lakštų valcavimas Hidrauliškai atidarantis galas Volų padėties skaitmeninis ekranas NC programuojamos 4 ašys Elektrinis valdymo pultas