Atliekų presai pirkti naudotą (321)

Būklė: labai geros būklės (naudotas), Gamintojas: Strautmann Tipas: PP 1207 Plus Balių formatas (I x P x A): 1200 x 1100 x 730 mm Balių svoris: apie 400–500 kg Išoriniai matmenys (I x P x A): 1850 x 1047 x 3079 mm Transportavimo aukštis: 2500 mm Užpildymo anga: 1190 x 600 mm Spaudimo jėga: 59 t / 580 kN Našumas: 1–2 baliai/val. Lhodpfjv Aiymex Ah Ujg Rišimų skaičius: 4 Preso svoris: 2300 kg Energijos tiekimas: 400 V / 50 Hz Galia: 4 kW Montavimo vieta: po stogu viduje/lauke Triukšmo lygis: mažiau nei 80 dB(A) Gamybos metai: 2003–2005 Taip pat turiu Strautmann PP 1207 presus, 2009–2011 metų, kaina 5500 EUR Taip pat turiu Strautmann PP 1208 presus, 2014–2015 metų Strautmann AutoLoadBaler, 2018 metų, kaina 7500 EUR

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, veikimo valandos: 3 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, paskutinio kapitalinio remonto metai: 2025, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Fill opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Total connected load: 40 kW Total current consumption: 70 A Throughput capacity with empty beverage cans: - with one pressing cycle: approx. 1.7 t/h Ledpfxsy S Rv To Ah Ujhg - with two pressing cycles: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Installed press dimensions: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition, see the function video after the overhaul. During relocation, the machine suffered transport damage. The control cabinet was struck by a forklift, causing minor dents, and the main switch (on/off switch) was damaged. These issues are reflected in the significantly reduced selling price and must be repaired by the buyer at their own cost. Notes: All documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is complete. Inspection is possible by appointment. We do not accept liability for technical information or potential errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Lhjdjy S Ru Aspfx Ah Ujg Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 30 143 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 800 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Lhodpfx Ahey S Rtle Ueg Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 000 kg, alyvos bako talpa: 3 100 l, tuščias svoris: 50 800 kg, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 795 m³/val, Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating Hours: 44,590 hours (as of December 2025) Main Press Force: 200 t Specific Press Force: 16.5 kg/cm² Feed Hopper Dimensions: 2,000 x 1,020 mm Filling Volume: 2.65 m³ Theoretical Throughput Capacity: 795 m³/hour Bale Dimensions: 1,100 x 1,100 mm, length variable Drive Power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic Oil Tank Capacity: 3,100 L Machine Weight (Press): approx. 50.8 t Scope of Supply: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electric and hydraulic circuit diagrams Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was carried out, and parts replaced: • Hydraulic oil tank completely emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram disassembled, dismantled into individual parts, mechanics serviced • Replacement of the front two main running rollers • Replacement of knives on the press ram • Main hydraulic cylinder disassembled, dismantled, cylinder tube and piston rod checked, complete seal kit replaced Lhodpfxjy S Rruo Ah Uog • Replacement of the counter-knife in the frame • Adjustment of knife clearance to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement of floor plate with wear-resistant HARDOX steel • Tying and twisting unit disassembled, dismantled into individual parts, mechanics serviced, all twister shafts and ball bearings replaced • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and readjusted, chains greased and tensioned • All wire guide rollers serviced • All door contact switches replaced • Twister unit disassembled, dismantled, and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic mode. Please refer to the function test video for further details. All documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Schematics) is complete. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 750 m³/val, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed hopper dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Nominal throughput: 750 m³/h Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Wire tying: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/h, material dependent Hydraulic tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale. Ledpfjy S Rqwox Ah Uehg A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts. Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Loading belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Overall length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive shaft height above floor: 5,777 mm Side wall height, loading belt: 500 mm Side wall height, incline belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available. Scope of supply: - 1 unit chain belt conveyor, Wagensfeld B.V. - 1 unit feed hopper with pre-compactor flaps - 1 unit agitator - 1 unit MACPRESSE baler, type 111A - 2 units wire feed racks with wire spool holders, without wire - 1 unit operating manual with CE declaration, electrical and hydraulic schematics

Būklė: labai geros būklės (naudotas), HSM V-Press 825 Plus Baler Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Lhodpov Akciofx Ah Ujg Loading height: 958 mm Loading aperture width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compacted materials: film, mixed paper, cardboard, die-cut waste, textiles Model years 2012-2014 price: 6,000 EUR HSM V-Press 825 Pro baler, model years 2019-2021 price: 9,000 EUR

Būklė: naudotas, Gamybos metai: 1998, Briketų presas Weima TH 400 Pagaminimo metai: 1998 Briketo skersmuo: 50 mm Našumas: 60–80 kg/val. Mašinos numeris: 950-756 Pagrindinis variklis: 7,5 kW Ljdpfx Ahowh I Urj Ushg 200 bar, 400 V Komplekte didelis surinkimo konteineris Įranga šiuo metu neveikia, hidraulinis blokas nesandarus. - Pagaminimo metai: 1998 - Dokumentacija: Nėra - CE sertifikatas: Nėra Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas verslui Pristatymas ir atpirkimas įmanomi bet kada viskam iš pramonės sektoriaus Yorick Diebels

Būklė: naudotas, Press screw REG-MAC for drying films and fibers, and for compacting foam materials (e.g. Styrofoam, EPS). Drive motor 55 kW. Lhsdpfx Ahey Th Ngj Usg

Būklė: naudotas, Gamybos metai: 1983, bendras plotis: 750 mm, bendras aukštis: 900 mm, bendras ilgis: 2 400 mm, Savaiminis svoris: 500 kg - Pagaminimo metai: 1983 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Transportavimo matmenys: 2400mm x 750mm x 900mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 500 kg Lhodpfx Ahjxalyys Ueg - Transportavimo paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Maržos apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir įrenginių priėmimas mainais bet kada galimi visoms pramonės sritims. Yorick Diebels

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Lodpfx Ahov Rpxlj Uehg Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: naujas, Gamybos metai: 2026, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale Lhodpfxjchqxxs Ah Ujg -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Lhsdpsgfm Ryjfx Ah Ujg Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: geras (naudotas), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Lhedpfxst Hxudj Ah Uog Year of manufacture: 12/2008 / technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functional guarantee upon handover

Būklė: geras (naudotas), Technical Specifications: Briquetting Press RUF RB 440 Pressing capacity for wood: up to a maximum of 440 kg/h Material moisture: maximum 15% Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 – 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg Ledpot H D Ezjfx Ah Uohg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Briketų presas aliuminio arba plieno drožlėms Itin didelis spaudimo slėgis – 3 700 kg/cm² Didelis bunkeris: 600 x 1500 mm Briketo matmenys: 60 x 40 mm Našumas: Aliuminio drožlės – iki 70 kg/val. Plieno drožlės – iki 180 kg/val. Lhsdpfx Ajw Ig Suoh Uog Žalvario drožlės – iki 220 kg/val. *priklausomai nuo medžiagos ir nustatymų Komplekte: - Emulsijos talpa - Emulsijos siurblys - Alyvos aušintuvas

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Lhedpfsd N Dnhex Ah Usg Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Techniniai duomenys: Briketavimo presas geros būklės Pagaminimo metai: 2007 Techninė apžiūra 2025-06 Cilindrinis briketas 80 mm Našumas iki maksimaliai 150 kg/val. *tik apie 3 949 darbo valandos Ledpfx Ahowtdk To Ujhg - Hidraulinis presas: briketavimo presas su išstūmimo taku - Hidraulinė stotis: 4 kW - Slėgis: maks. 300 barų - Transportavimo matmenys: 1585/2140/H1940 mm - Svoris: 1370 kg Funkcinė garantija atiduodant Maloniai kviečiame nemokamam išbandymui!

Būklė: geras (naudotas), Svoris: 120 kg Ilgis: 800 mm Plotis: 600 mm Aukštis: 330 mm Likutinės naujų ir naudotų frezų su anga, kotinių frezų, grąžtų, kaištinių grąžtų, keičiamos plokštelės bei įvairių kitų peilių atsargos. Gamintojai: Leitz, Leuco, Oppold ir kt. Lhsdpfxoy Aa I Te Ah Ujg Įdomu kiekvienai gerai įrengtai galandinimo dirbtuvei.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, spaudimo jėga: 80 t, DIXI 80 SLD horizontali presė Pusiau automatinė presavimo sistema su 80 tonų presavimo jėga, skirta ekonomiškai sumažinti pramoninių ir komercinių atliekų (perdirbamų) tūrį: Kartonas Tetrapakai Plėvelės Putų medžiagos PET buteliai Izoliacinės kilimėliai ir kitos presuojamos medžiagos. Presavimo jėga: 80 t Elektros jungtis: 400 V, 50 Hz; 11 kW; D-32 A (papildomai: K-32 A) Ciklo trukmė – vidutiniškai apie: 35 sek. Ilgis apie: 4 320 mm (be kėlimo įrenginio ir padėklo) Plotis apie: 1 830 mm Aukštis apie: 2 620 mm (su bunkeru) Įkrovimo anga (PxG) – korpusas: 1 040 x 1 110 mm Balo matmenys: 1 120 x 1 120 x 1 200 mm Balo svoris apie: 500–600 kg Rišimas: 4 kartus rankiniu būdu, viela su greitai atveriamomis kilpomis Mašinos svoris apie: 8 000 kg (be balo) Lhjdpey Iykxofx Ah Uog

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 40 t, balo svoris: 370 kg, HSM HL 4010 Re / Li horizontalus presavimo įrenginys su krepšelio verstuvu. Pagaminimo metai: 2015. Labai gera būklė – reguliariai prižiūrėta įgalioto techninės priežiūros centro. Paruošta darbui. Galima surišti viela, virve arba polipropileno juosta. Pusiau automatinė balų presavimo sistema su 40 tonų presavimo jėga – efektyviam pramoninių ir komercinių atliekų (perdirbamų medžiagų) tūrio sumažinimui: Kartonas Tetrapakai Plėvelės Putplastis PET buteliai Izoliacinės kilimėliai ir kitos presuojamos medžiagos. Presavimo jėga: 400 kN Transportavimo plotis: 1,767 m Transportavimo aukštis: 2,489 m Transportavimo ilgis: 5,573 m Ledpfoy Iyd Sex Ah Ujhg Svoris: 4 500 kg Variklio galia: 7,5 kW Balių svoris (priklausomai nuo medžiagos): 300–350 kg Balos dydis (ilgis x plotis x aukštis): 750 x 1200 x 750

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, galia: 22 kW (29,91 AG), paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 530 m³/val, Technical Data Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pcs (as of April) Main press force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/h Throughput under working conditions: 260 m³/h Feed opening dimensions: 1,250 x 1,100 mm Chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm (variable length) Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: 6 to 7 t/h - 50 kg/m³: 7 to 9 t/h - 100 kg/m³: 11 to 14 t/h Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank volume: 600 L PLC: Telemecanique TSX Micro Control panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press: approx. 16 t Condition of the baler: The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice. The following overhaul work was performed: General Work: - Machine cleaned, derusted, primed, and partially painted - Wire ingress marks in the press channel welded and smoothed Hydraulic Unit: - Hydraulic oil tank drained, tank cleaned, filled with new oil - Oil and air filters replaced - Leaking oil sight glass on the tank replaced - All hydraulic hoses replaced Electrical System: - Program menu language set to English - Two key switches on the control panel replaced - Control cabinet replaced - Signal lamp on control cabinet replaced - Flap limit switch replaced - Electrical system for the agitating device renewed, connected, and tested Press Ram: - All four press ram guide rollers removed and replaced - Main hydraulic cylinder dismantled, disassembled and partially overhauled (cylinder barrel honed, complete seal kit replaced, tightness test performed) - All plastic wear pads on the press ram replaced Pre-press Flap: Lsdpsy R Npiofx Ah Uohg - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders dismantled, disassembled and partially overhauled (cylinder barrels honed, complete seal kits replaced, tightness test performed) - Scraper flap on the pre-press renewed Tying System: - Two complete needles with wire guide rollers replaced - Needles adjusted and set - All wire guide rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister unit below the twister fingers replaced Scope of delivery: Only the baler is being sold. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagram) is available. Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 13 209 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 050 mm, ryšulio plotis: 100 mm, ryšulio aukštis: 700 mm, balo svoris: 500 kg, bendras svoris: 8 500 kg, alyvos bako talpa: 400 l, galia: 15 kW (20,39 AG), paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 108 m³/val, Technical Data – Baler: Manufacturer (according to nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours, as of March 2026 Number of bales pressed: 23,379 pcs Pressing force: 50 t Specific pressing force: 650 kN/m² Feed opening dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 3.1 t/hour 60 kg/m³: approx. 4.5 t/hour 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions baler only: 6850 x 1950 x 2650 mm (L x W x H) Transport weight baler: 8.5 t Condition of the baler: The baler was in use at a production facility exclusively for compacting cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen relatively little use. The baler has been partially overhauled in our workshop and has undergone final testing. The following overhaul work was carried out: - Machine cleaned - Bale retainer checked for smooth operation and lubricated - Light barrier replaced - Twister unit completely dismantled, all bearings replaced, all plastic guides replaced, lubricated, and chain tension adjusted Lhjdpfxsy R Npcs Ah Usg - Knife and counter-knife dismantled, sharpened, reassembled - Knife clearance reset - General maintenance performed and lubricated Scope of delivery: - 1 baler with wire spool boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) - 1 wire spool box for floor mounting (1450 x 380 x 360 mm) To remove the baler, you will need a tautliner with an effective internal height of 2700 mm. Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is complete. Viewing by appointment is possible. We take no responsibility for technical data or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 400 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 75 kW (101,97 AG), paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 300 m³/val, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (status: December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Ljdpjy R Nnfsfx Ah Uehg Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), variable length Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (bulk density): - At 30 kg/m³: approx. 6.0 t/hour - At 50 kg/m³: approx. 10.5 t/hour - At 100 kg/m³: approx. 17.5 t/hour Bale weights, at a bale length of approx. 1.2 m: up to 600 kg (material dependent) PLC control: Siemens S7-300 Display panel: pulsotronic Installation dimensions (L x W x H): 8,610 x 2,400 x 3,835 mm Transport dimensions (L x W x H): 8,500 x 2,450 x 2,950 mm Transport weight: 16 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Special pressing ram for compacting 'difficult' materials and loose bulk materials with small particle size - Control cabinet air conditioning - Machine base heightening, 200 mm Note: The machine has been serviced and partially overhauled in our workshop. Finally, the press was subjected to a machine test in both manual and automatic modes; see video for a demonstration of the machine’s functionality. Scope of delivery: - 1 Avermann baler, type AVOS 1410-45/80 (8,500 x 2,450 x 2,950 mm) - 1 pallet with safety grilles and small parts (1,400 x 600 x 1,250 mm) - 1 ground wire-pulling frame on double-T beams (1,900 x 1,750 x 2,550 mm) - 1 wire-pulling frame above the press channel (2,300 x 2,300 x 2,150 mm) - 1 pallet with 8 wire reel stands, without wire (1,300 x 850 x 1,000 mm) - 1 pallet with 4 wire redirecting units (2,200 x 800 x 380 mm) - 1 pallet with one bale chute (4,000 x 1,300 x 650 mm) - 2 bale guide plates (1,150 x 1,450 x 150 mm) For the transport of the machine with attachments, a Mega Liner with an effective internal height of 3,000 mm is required. Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available.

Būklė: naudotas, Gamybos metai: 2022, bendras plotis: 1 800 mm, bendras aukštis: 1 900 mm, bendras ilgis: 1 800 mm, bendras svoris: 3 000 kg, galia: 35 kW (47,59 AG), Hidraulinė briketų presas Gamintojas: Winter Tipas: BP 450 Pagaminimo metai pagal tipinę lentelę: 2022 Techniniai duomenys: Maksimali našumas: 450 kg/val. Variklis: 35 kW / 400 V, 50 Hz Drožlių suspaudimas: min. 1 000 kg/cm² maks. 1 500 kg/cm³ Medienos drėgnumas: < 14 % Briketų matmenys: ilgis 150 mm, plotis 60 mm Matmenys (I x P x A): 1 800 x 1 800 x 1 900 mm Svoris: 3 000 kg Medžiagos padavimo sraigtai yra komplekte. Grynoji pirkimo kaina: 36 400 € plius įstatymų numatytas PVM PVM nurodomas atskirai mūsų sąskaitoje. Pasiliekama teisė keisti, klysti ir parduoti ankščiau. Lhedpfx Aheymwxve Ueg Pardavimas vykdomas be garantijos ir be jokių įsipareigojimų – tik verslo subjektams. Užklausos apdorojamos nuo pirmadienio iki penktadienio, 8 – 16 val.