Frezavimo staklės - universalios

Maho MH 800

Būklė: naudotas, Gamybos metai: 1992, Technical details: X-travel: 800 mm Y-travel: 550 mm Z-travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 stepless rpm Feed rate: 1–3000 mm/min stepless Rapid traverse: 6 m/min Table clamping surface: 1100 x 600 mm Table feed: 1–3000 mm/min stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH): approx. 2.9 x 2.2 x 2.5 m Additional technical specifications: - Vertical table adjustment (Z-axis): 500 mm Rcsdpfxju Nda Ee Adzsb - Spindle head overhang min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control unit - Heidenhain linear measuring system

Būklė: naudotas, Gamybos metai: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotational movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 – 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total connected load: 35 kVA Rjdpfx Adetv H Ucozscb Machine weight: approx. 10 t Space requirement: approx. 4.5 x 2.8 x 2.5 m The machine was completely overhauled by the manufacturer in 1994, including: - new electrical cabinet - new BOSCH servo drives and Heidenhain TNC 360 control (3D control) - facing slide Ø 600 mm, travel: 150 mm The machine is currently not ready for demonstration due to an electrical fault.

Būklė: naudotas, Gamybos metai: 1975, Universalioji frezavimo staklė MAHO MH800, pagaminta apie 1975 m. Veleno tvirtinimas ISO 40 X – 800 mm su universaliu stalu. Rcodpfx Ajyvr Eqodzob Y ašyje padavimo funkcija neveikia? Svoris apie 3 t. Yra visos staklių dokumentacijos.

Būklė: naudotas, Gamybos metai: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm Table clamping surface 940 x 510 mm Spindle taper SK 40 Spindle speeds 32 - 1600 rpm Feeds - longitudinal & cross 8 - 400 mm/min Feeds - vertical 4 - 200 mm/min Total power requirement 4.5 kW Machine dimensions (L x W x H) 1.85 x 1.62 x 1.83 m Rcedpfxevzhh Tj Adzeb Accessories: Swiveling vertical head with extendable quill, universal table, counter bearing, coolant system

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5" - Spindle drive power: 11 [kW] - Spindle speed: 6000 [rpm] - Max. bar diameter: 51 [mm] - Max. machinable diameter: 195 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5" Rcodpfjw Efgaex Adzeb - Spindle drive power: 7.5 [kW] - Spindle speed: 6000 [rpm] - Max. bar diameter: 42 [mm] - Minimum C-axis resolution: 0.001 [degrees] TRAVEL PATHS - Z travel: 400 [mm] - X travel: 150 [mm] - Rapid traverse speed: 36 [m/min] - Distance between main spindle and sub spindle: 600 [mm] TURRET 1 - Number of positions: 24 - Number of driven positions: 12 - X/Z travel: 400/150 [mm] - Y travel: +/- 40 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 7.1 [kW] TURRET 2 - Number of positions: 9 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 3072x1974 [mm] - Machine height: 1799 [mm] - Machine weight: 6500 [kg] EQUIPMENT - CNC control: Fanuc 0i-TF PLUS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - 3-color status light - Coolant tank * Internal coolant supply (IKZ) - Chip conveyor: DROITE LNS MH500 - Tool measuring probe system - Parts removal unit - Parts conveyor belt - Bar feeder interface - Electrical transformer

Būklė: naudotas, Universal tool milling machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 path control. Machine number: 80983, year of manufacture: 1982 The machine was overhauled by MMD in 2008 and has since been only rarely used in an electronics company’s maintenance workshop. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill stroke vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Rcsdpfx Adsv Amryszsb Quill stroke horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 Volt, 50 Hz, 10 kW Equipment/features: - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed from 0.02 to 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tiltable and swivelable by 30°, 225 mm transverse adjustment - Rotary table with direct division 72 x 5° and indirect division via index plate 1:120 = 1 rotation = 3° - Swivelling control panel - Centralized lubrication - Operating manual included - Machine mounted on a steel plate (L x W x H: 1400 x 1000 x 50 mm = 550 kg) Space requirement (L x W x H): 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (measured) Condition: very good

Būklė: naudotas, bendras aukštis: 2 000 mm, bendras plotis: 2 300 mm, bendras ilgis: 3 000 mm, Svoris be krovinio: 3.200 kg - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Valdymo tipas: Konvencinis - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 800 - Y ašies eiga [mm]: 450 - Z ašies eiga [mm]: 500 - Stalo ilgis [mm]: 1050 - Stalo plotis [mm]: 625 Rjdswnif Sepfx Adzecb - Įrankio laikiklis: ISO40 - Min. veleno apsisukimai [aps./min]: 32 - Maks. veleno apsisukimai [aps./min]: 1600 - Papildomai: Skaitmeninis indikatorius - └ Skaitmeninio indikatoriaus tipas: Heidenhain - Transportavimo matmenys: 3000mm x 2300mm x 2000mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 3200kg - Transporto paketų kiekis [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencinis apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas galimi bet kokiai pramoninei įrangai Lukas van Rossum

Būklė: naudotas, Gamybos metai: 1999, X-axis travel: 600 mm Y-axis travel: 525 mm Rcodpfx Aotqqmhjdzeb Z-axis travel: 500 mm Table clamping surface: 1000 x 543 mm Spindle taper: SK 40 Spindle interface: DIN 69871 Spindle speed – stepless: 20 – 12,000 rpm Feed rates X/Y/Z axis: 20 – 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Maximum table load: 350 kg Control system: HEIDENHAIN MillPlus Head swiveling: +/- 90° Total power requirement: 26 kVA Machine weight: approx. 4.2 t Machine dimensions (L x W x H): 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Gamybos metai: 1988, būklė: naudotas, mašinos/transporto priemonės numeris: 82053, Table clamping surface: 600 x 1100 mm Travel x-axis: 800 mm Travel y-axis: 450 mm Travel z-axis: 500 mm Rcodpfx Adexnp Dezeb Quill stroke: manually approx. 50 mm Spindle speeds: 63 - 3150 rpm Feed, infinitely variable: 0.1 - 1500 mm/min Rapid traverse: x/y/z 4.5/2.6/3 m/min Electrical connection: 380 V, 5.5 kW Space requirement: 3000 x 2500 x 2030 mm Weight: approx. 4000 kg CNC control 432 with graphics and "half-cabin"

Būklė: geras (naudotas), CNC Control, Card Cage, Control Cards, Plug-in Cards, PCBs, Control Rack -Manufacturer: Philips, Control rack removed from a MAHO MH 800C CNC milling machine -PCB: 4022 224 7062 -Plug-in card: 4022 224 3433 -Graphic Modem: 4022 224 3451 -Central Processor: 4022 226 2331 -Drive Module: 4022 226 3645 / 4022 226 3690 -LS/LS Board: 4022 226 3680 -Input/Output Module: 4022 226 3531 (2 pieces) -Power Supply: 4022 226 2270 PE 1870/03 -Individual components: see pictures -Price/Sale: complete set Rjdoq T T Nhopfx Adzscb -Dimensions: 375/310/H340 mm -Weight: 13.4 kg

Būklė: labai geros būklės (naudotas), The plant essentially consists of: Redjlxzl Eepfx Adzjcb - 2 feeding units (walking floor bunkers) - 2 silos, each with 55 cbm, equipped with discharge screws - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-operated twin-shaft extruders for processing woody biomass - 1 twin-shaft paddle mixer - twin-shaft extruder for homogenization - laboratory container with mixing and dosing system for liquid extracts

Būklė: geras (naudotas), CNC controller, control panel, operator panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay board -Manufacturer: MAHO, relay board from CNC milling machine MH 800C Rjdpoq T T I Ijfx Adzecb -Type: 28A1 -ID No.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

Būklė: naudotas, control panel, touch screen, operator unit, display, operator panel, PLC, Simatic panel PC, touch screen, touch panel, Simatic multi panel, touch multi panel, touch panel Rsdpfx Ajq T T Nwedzocb -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Overall dimensions: 340/310/H30 mm -Weight: 0.8 kg

Būklė: naudotas, Technical Details: Y-Axis Travel – Slide on Beam: 200 mm Rsdpfou Ndb Asx Adzecb Spindle Taper ISO: SK 40 Swiveling Spindle Head, Left/Right: ±90° Quill Stroke: 80 mm Speed Range: 90 – 900 / 5 steps rpm Distance, Table to Spindle Underside (min./max.): 50 / 400 mm Table Mounting Surface: Attachment Area: 760 x 200 mm Table Clamping Surface: 630 x 200 mm Max. Table Load: 100 kg X Travel – Table Longitudinal: 320 mm Z Travel – Table Vertical: 350 mm Table Swiveling Range: ±30° (right/left) Distance, Table to Spindle Underside (min./max.): 50 / 400 mm Feed Rate: Table, stepless 14 – 71 mm/min Total Power Requirement: 4.0 kW Approx. Weight: 1,200 kg Machine Dimensions approx. LxWxH: 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital position indicator for X and Y axes. Swiveling working spindle. Table feed is via variator gearbox. The table is swiveling. Spindle speeds are set in 3 steps via gearbox and 2 steps electrically. Coolant system installed. Milling beam extendable by approx. 350 mm. The machine vice is recommended but NOT included in the scope of delivery. It can be purchased optionally.

Būklė: naudotas, Control cabinet - cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler Rcsdpfxoq T T Nzo Adzsb -Manufacturer: Siemens, heat exchanger for control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: 8ME 7874-DR -Voltage: 230V -Power consumption: 170 W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg