Sukomplektuotos lentpjūvės (stacionarios)

MADREW AE-400

The AE-400 SERVO edger is designed for longitudinal edging and ripping of side boards fed into the machine at high speeds (100-400 m/min).

The machine works in direct integration with infeed and outfeed conveyors for boards in automatic mode. It is equipped with a top and bottom board scanner.
Fodpfonygvrox Acusgh

A maximum instantaneous capacity of up to 50 boards/min can be achieved when cutting 2.5m boards to the same width without changing saw spacing. Each adjustment of the edger's devices to the board's width alters the efficiency. The average machine capacity, depending on work configuration, ranges from 35 to 48 boards/min.

Technical Data
No. | Parameter | Value
---|---|---
1. Spindle drive motor power | 55 kW
2. Saw spindle speed | 3550 rpm
3. Saw blade diameter | 400 mm
4. Max. cutting height | 50 mm
5. Number of saw blades used | 2 to 3 pcs (2 floating saws)
6. Minimum board length | 2000 mm
7. Maximum raw material length | 6200 mm
8. Maximum number of boards after splitting 1 board | 2 pcs
9. Feed speed | 100-400 m/min

Cutting to 1 board – with two saw blades (2 floating saws):
1. Minimum saw spacing (board width after cutting): 75 mm
2. Maximum outer saw spacing (board width after cutting): 300 mm

Cutting to 2 boards – with three saw blades (2 floating saws):
1. Fixed coupling saw spacing (board width after cutting): 50-100 mm
2. Spacing between floating saws (board width after cutting): 50-100 mm
3. Minimum cut for 2 boards: 2 x 50 mm
4. Maximum cut for 2 boards: 2 x 100 mm

Other machine configurations are available upon request. Made to order.

We also manufacture other sawmill lines: log sorting conveyors, board sorting conveyors, board stackers, conveyors.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.