Balių presas, 200 t spaudimo jėga, didelis formatas

MACPRESSE 112

Technical Data – Baler:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of Manufacture: 2002, partially overhauled in December 2025
Operating Hours: 44,590 hours (as of December 2025)
Main Press Force: 200 t
Specific Press Force: 16.5 kg/cm²
Feed Hopper Dimensions: 2,000 x 1,020 mm
Filling Volume: 2.65 m³
Theoretical Throughput Capacity: 795 m³/hour
Bale Dimensions: 1,100 x 1,100 mm, length variable
Drive Power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput for MSW: approx. 48 to 54 t/hour, depending on material
Hydraulic Oil Tank Capacity: 3,100 L
Machine Weight (Press): approx. 50.8 t

Scope of Supply:
1 unit baler MACPRESSE, type 111A
1 unit operating manual with CE declaration, electric and hydraulic circuit diagrams

Remarks:
The machine has been serviced and partially overhauled in our workshop. The following work was carried out, and parts replaced:

• Hydraulic oil tank completely emptied and cleaned
• Oil and air filters replaced
• New hydraulic oil filled
• All hydraulic hoses replaced
• Press ram disassembled, dismantled into individual parts, mechanics serviced
• Replacement of the front two main running rollers
• Replacement of knives on the press ram
• Main hydraulic cylinder disassembled, dismantled, cylinder tube and piston rod checked, complete seal kit replaced
• Replacement of the counter-knife in the frame
• Adjustment of knife clearance to approx. 3 mm
• Upper steel guide rails in the frame (left and right) replaced
• Removal of worn press floor, replacement of floor plate with wear-resistant HARDOX steel
Crsdpszbxwijfx An Hjc
• Tying and twisting unit disassembled, dismantled into individual parts, mechanics serviced, all twister shafts and ball bearings replaced
• Replacement of all wire rollers in the needle heads
• Wire cutters cleaned and readjusted, chains greased and tensioned
• All wire guide rollers serviced
• All door contact switches replaced
• Twister unit disassembled, dismantled, and serviced
• General maintenance performed

Finally, the baler was tested in both manual and automatic mode. Please refer to the function test video for further details.

All documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Schematics) is complete. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.