Mini kranas

Winlet 350 SOLD

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg Csdpfxomhhf Ss Admshf - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Sąlyga: naujas, The manufacturer Zambelli Metalltechnik GmbH & Co.KG will discontinue support for all paternoster and storage lifts as of 31.12.2023. The company will no longer provide support or spare parts for these devices in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time. Cjdoiy Dw Hopfx Admjhf

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, kėlimo aukštis: 3 750 mm, Gamybos metai: 2025, keliamoji galia: 600 kg, Glasslift is an authorized distributor of BG LIFT and UNIC mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA spider-type aerial work platforms. We are also a member of the GGR GROUP and have introduced our own series of GLW transport trolleys. Thanks to our extensive range of equipment, we can recommend machines tailored to the specific requirements of each project, ensuring customers receive the most suitable solutions. At Glasslift, we not only execute projects, but we also supply the tools necessary for their efficient completion. In addition to sales, we also offer short- and long-term rentals for all of the above equipment. Glasslift is a team of professional operators specializing in comprehensive glass installation, steel handling, and operation of structural components. Our experienced specialists have an in-depth understanding of their fields, are highly qualified, and every one of our operators is fully committed to the successful execution of every project. We possess the required expertise, technical knowledge, and thorough professional preparation, which allows you to place complete trust in us. Our skills are confirmed by positive customer feedback, references, and published testimonials about our work—testament to our reliability and professionalism. Work with the best to ensure comprehensive and effective project execution. Cedswt Ag Tspfx Admjhf For sale: NEW reliable SMARTLIFT SL609 Outdoor High Lifter Electric glass manipulator equipped with a wired remote control. The High Lifter Electric series is characterized by its extended reach and higher lifting capacity. The SL 609 Outdoor High Lifter Electric is a powerful machine suitable for both indoor and outdoor operations, such as on construction sites. The machine is equipped with two electric arm extensions controlled by the remote. Despite its compact design, its strength allows for horizontal lifting up to a maximum range of 160 cm and vertical lifting up to 420 cm. » Maximum lifting capacity: 600 kg » Capable of handling rough terrain, thanks to special tires » Two electric arm extensions » Front-wheel drive » PU foam-filled tires » Self-propelled » Automatic parking brake » Vertical lifting height: 3.75 m (head rotation axis) » 2 independent vacuum circuits » 4 suction pads, 400 mm diameter each » Ergonomic operator handle » IP 65 dust and waterproof rating Distinctive features of series 09 compared to previous series 08 » Remote vacuum control via remote control » Faster actuator speed » More powerful machine » Head/actuator position memory function » Trackunit app compatibility (selected models), allowing machine monitoring on a smartphone » Light tower displaying machine status Purchasing from the exclusive distributor guarantees the quality of your machine, spare parts availability, and service support. Presentation or rental (with or without operator) can be arranged upon request.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever racking in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 racking uprights, height 4,200 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) (*Delivery or collection in approx. 1–2 weeks) (*No paint damage!) (*No damaged components!) (*Spare parts and expansions available on request at any time) (*Offer also available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed Description: Chsdpfx Asmhhypjdmsf - Sturdy steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Height adjustable cantilever arms in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 740 kg - Including longitudinal and diagonal bracing for 1,300 mm upright distance - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with pre-delivery notification. The material is packed for efficient and easy unloading. Delivery can take place approx. 1–2 weeks after receipt of order. When installing outdoors, the load capacity must be reduced according to wind and snow loads. The substrate must be concrete, level, suitable for anchors, and capable of bearing the imposed loads. The customer is responsible for inspecting and ensuring the ground condition, load-bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to trade association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Sąlyga: naujas, KRM ST 30/5 – tai galinga apvali lenkimo staklė, priklausanti apvalių lenkimo staklių kategorijai ir 3 volų apvalių lenkimo staklių gaminių grupei. Jos puikiai tinka iki 3000 mm ilgio ruošiniams apvaliai lenkti. Šios tvirtos staklės turi solidžią, uždarą rėmo konstrukciją ir varikliu reguliuojamą galinį volą, leidžiančią plačiai naudoti plieno bei metalo konstrukcijų gamyboje. Asimetriškas volų išdėstymas specialiai pritaikytas storoms plokštėms, o sukietinti volai iš kokybiško plieno leidžia apdoroti ir nerūdijantį plieną. KRM ST 30/5 taip pat siūlo rankinį ir pasirenkamą motorinį apatinio volo nustatymą bei elektromagnetinį stabdį maksimaliai kontrolei lenkimo metu. Jei turite klausimų dėl montavimo ar priedų, mūsų pagalba visada pasirengusi jums padėti. Užsisakykite dabar ir atraskite plačias lakštinio metalo apdirbimo galimybes su KNUTH! Cedoihvtgspfx Admshf

Gamybos metai: 2007, Sąlyga: geras (naudotas), Poliamido surinkimo įrenginys SCHÜCO ISOMAT 5, skirtas aliuminio profiliams. Mažai naudotas, su įrankiais įvairiems profiliams. Šiuo metu išardytas transportavimui. Profilių juostavimo įrenginys gali būti naudojamas apsauginės juostos klijavimui ant visų profilių su dviem lygiagrečiais paviršiais. Vienu veiksmu juostą galima klijuoti ir ant trečio paviršiaus, statmeno kitiems dviems. Codpfx Aotq E Eisdmehf

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Chsdpfemhh Dhsx Admjf According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, A Schüco profile rolling machine for the thermal break of aluminium profiles in window, door, and façade construction is available. Processing speed: 45 m/min, control speed: 15 m/min, max. profile height: 400 mm, max. profile width: 250 mm, max. insulation bar width: 300 mm, machine dimensions X/Y/Z: approx. 2700 mm / 800 mm / 1650 mm, weight: approx. 900 kg. Includes insulation bar feeder, safety guard cage/straightening roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection possible. Chsdpfx Adswtg Hwomjf

Gamybos metai: 2012, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vacuum glass lift Codpfxewq Nwao Admjhf

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1984, veikimo valandos: 6 646 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 4 300 mm, bendras aukštis: 6 030 mm, bendras ilgis: 3 750 mm, Gutmann PH315 Hook-type Shot Blasting Machine Cedpfxswtpxie Admehf Hook-type shot blasting machine for workpieces up to 2100mm in height, 900mm in diameter, and weighing up to 500kg. The machine requires refurbishment; after dismantling and transport from Germany, it has not been started up. Technical documentation for the machine is available in German. The machine is disassembled and stored outdoors. No CE certification. Currently equipped with 3x Motorenmaier turbines type 1TZ90011DA234FB4Z, each 11kW/12.6 S1. Spare parts included: 3x AGTOS turbines type RF132S/20K, each 7.5kW (blade repairs required). Also included: tungsten plates for refurbishment of the shot blasting chamber interior. Overall width with rails: 4300mm Overall assembled height: 6030mm Overall length with rails: 3750mm