Pjūklai

Sąlyga: naujas, Gamybos metai: 2023, For sale due to incorrect planning: a new, original-packaged cantilever discharge unit for a Fröhling heating system, suitable for a 6 m storage area, including a 1 m screw conveyor extension. The unit features separate drives for the screw conveyor and the rotary plate (two motors), making it ideal for use with two boilers. The photo shown is from another installation, as my unit is still packaged. Nedpjuq Iy Rofx Aghjwp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, The machine is in very good condition, has seen little use, and comes with full equipment. Nsdjw E Ei Uepfx Aghjwp Additionally, 20 saw blades included in the set. SPECIFICATION: WRAVOR BAND SAWMILL TYPE 1225 AC (angled cutting) Max. log width: 1250/1090 mm Max. cutting length: 8 m Main motor: 45 kW Cast wheels Cast wheel width: 130 mm Wheel diameter: 1200 mm Raising/lowering – double screw TR60x9 (18) + 11 kW Danfoss inverter + Siemens 3-phase brake motor Electric motor for raising/lowering: 11 kW Blade PV 45 length: 8685 mm, thickness: 1.2 mm, width: 140/150 mm Feed drive with electronic solutions for blade forward/back – SEW reducer with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor adjustment of cutting thickness with electric shut-off Digital cutting thickness adjustment with Wravor V280 program Hydraulic unit 40 L, tank with two pumps 13+6 L + 3 kW motor Complete hydraulic system Hydraulic blade guide left and right HIWIN LINEAR Hydraulic pre-cutter / bark scoring cutter: 1 Hydraulic board ejector: 1 Additional hydraulic board ejector and guider Side-mounted control panel Multifunctional joystick with 2 positions: 1 Multifunctional joystick with 4 positions: 1 Laser: 15 mW Cameras: 3 Fan: 2.2 kW + 15 m sawdust duct + 4 pipe supports Water cooling – automatic cooling hydrofor (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel greasing TRACK Welded construction, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter on brackets – mechanical roller: 4 Hydraulic log lifter on brackets – hydraulic roller: 7 Set of lifting cylinders: 7 hydraulic + 4 m: 1 Hydraulic turner – new type: 3 Centering device – 1 set: 4 Hydraulic unit 120 L, tank with one pump 50 L, motor 15 kW + Danfoss inverter: 1 Cable carrier with energy chain: 14.5 m C-profile carrier for ventilation – 4 double trolleys Belt discharge conveyor 4 m with 1 m feed segment + electric motor 3 kW, front section with hydraulic lift

Gamybos metai: 1999, Sąlyga: naudotas, The DSG 200 vertical sawmill is the ideal option for woodworking facilities specializing in furniture and wooden flooring production; it is efficient and performs reliably in operation. A used Wintersteiger mini sawmill is a very sound investment. A major advantage of this machine is that it does not take up as much space as standard equipment of this type, while still excelling in material processing. It is used for cutting individual elements and matching them to the desired sizes. The machine is easy to operate and can be mastered quickly. The greatest asset of our sawmill is its extensive equipment, featuring primarily a blade spraying system controlled from the panel, enabling precise cutting of wet material. Nwodpfx Ajtvm Hdjghop It features independent adjustment of the upper rollers’ height, allowing for quicker cutting height settings. Pneumatic feed pusher assists the feed process. TECHNICAL DATA: -Total power: 27.3 kW -Air Jet system motor: 2.3 kW -Siemens control panel -Feed rate up to 2 m/min -Sawmill frame stroke: 210 mm -Strokes per minute: 400 -Cutting height: steplessly adjustable (smoothly) on our frame: 45–250 mm -Maximum achievable cutting height: 400 mm! -Cutting width under side pressure: 80–205 mm -Minimum block length: 250 mm -Lamella thickness: from 1.5 mm – depending on wood type and cutting height -Kerf for used blades: 0.9–1.1 mm depending on cutting height -Length: approx. 5000 mm -Width: approx. 1300 mm -Height: approx. 2600 mm -Weight: 5000 kg Pneumatic feed pusher assists the feed process The machine is supplied with: -Complete large saw blade frame -Small saw blade frame -Frame pins -Frame tensioning wedges -Blade spacers -Blades for wet cutting -Blades for dry cutting -Set of upper feed rollers -4 lower feed rollers -Set of slides -Frame yokes -Pocket cutting guides -Loading magazines -DTR documentation -Electrical diagram

Sąlyga: labai geros būklės (naudotas), Komplette Sägelinie mit Einlauf, ARI SKR 600 Reduzierer, ARI KS 122 Säge, ARI BKR 600 zweiter Reduzierer, ARI DS 70 Mehrblattkreissäge und ARI KT 52 Kantenbearbeitungslinie mit vollständigem Scanner. Nsdpfoikvl Rjx Aghswp Vollständiger Boden für Reststoffentsorgung. Alle Schaltschänke und Hydraulikanlagen enthalten.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 Nodpfx Agswya Syehjwp DIMTER cross-cutting system with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, The following machines, all in very good condition and ideal for professional woodworking operations, are available for sale: Saw line comprising: • Infeed device ZV21, model EV 50 • Profiling chipper ZD31, model VM50 • Outfeed device AV31, model VZM • Centering device VZ21, model VZV • Log turning device DV21, model DV70-2 • Infeed and centering device EVP • Professional chipper VM50 • Profiling unit VMP450 F61 (4x110 kW) • Microtec measurement system Additionally available: Further used woodworking machinery ?️ Additional equipment available: More used woodworking machinery Springer log infeeder  • 5-arm version  • Log separator (5-arm)  • Receiving spike chain conveyor (26 m) LINCK turning device DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t Nedpfx Agew Stiuohowp  • State-of-the-art turning technology for precise positioning 2 units chipper infeed – infeed and centering device EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separating conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 units LINCK chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – left & right-hand side  • Dimensions: 2.8 m x 2.1 m x 2.5 m each  • Weight: 3 t each LINCK pre-centering unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log infeeder with feed station and log conveyor Location & Availability All machines are located at our warehouse, A-3525 Lugendorf No. 38, and are available immediately. Price on request For more information or to arrange a viewing appointment, please feel free to contact me.

Sąlyga: naudotas, Gamybos metai: 2000, Debarking plant type VK 32 Nwodpowwladofx Aghjp !! Sale on behalf of customer !!

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Nwjdpfxeu Atmuo Aghsp Delivery terms: ex location

Gamybos metai: 1976, Sąlyga: labai geros būklės (naudotas), Frame Saw / Sash Gang Saw BÖGLI KHV-700 Marathon Nwjdpfx Agspyglishsp Year of manufacture: 1976 75 HP, 380V, 50Hz Max. passage width: 710 mm Stroke: 500 mm with Marathon 2 riving knife Very good condition – immediately available Location: Austria, near Feldkirch

Sąlyga: naujas, Gamybos metai: 2024, ANGOMAC SOLID MULTIRIP SAW 600 mm feed opening Cutting height up to 120 mm Maximum cutting width 480 mm Nwedpfsh Ia Upox Aghsp