Lovos rėmo presas

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment maximum blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm Kodpfx Afjqy E Rlo Tjdw track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Kdedpfx Asi Hpk Ujf Tew Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Gamybos metai: 1983, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 2103, Max. clamping chuck bore: 1 - 20 mm Ø Kodpfx Afodnfz Nj Tsdw Max. radius to be ground: 20 mm Cup wheel diameter: 100 mm Cup wheel speed: approx. 4500 rpm Drive motor: 380 V, 0.25 kW Required space: 600 x 450 x 1380 mm

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Kedpsu Uh T Djfx Af Tedw Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a dowel drilling machine with dowel insertion unit KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Kedpfx Afsd Exwge Tedw Programmable CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Kodpfxscqvhwj Af Tsdw Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), Window manufacturing machines WEINIG Tenoning and slotting machine UNITEC 10, year 1997 Kdjdpoiix Uvsfx Af Tow Profiling and rebate milling machine UNIVAR 10, year 1997

Sąlyga: naujas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: A2306/9210, The pneumatic drawer and frame press of type Box V3.0 enables easy and fast assembly of drawers and frames. Thanks to its functional design, both individual workpieces and complete boxes with a wide range of joints can be optimally pressed. This ensures a perfect joint and shape of drawers and frames. Due to the special pressing process, folded joints and fronts with glass inserts will not deform. Kedpfegqfnzsx Af Todw Maximum pressing force: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops to accommodate protruding drawer fronts during pressing Slow approach of the moving pressing unit to the workpiece Operation via joystick Optional features: - Digital positioning display - Kit Door (for pressing furniture corners from the front) Advantages: - High flexibility: Variable, adjustable pressing force and a variety of drawer and frame dimensions - Minimal setup times enable high output - Intuitive operation - High operational safety due to CE safety standards, e.g., two-hand operation - Plug & Play

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of Manufacture: 1999 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Self-collection Delivery Costs: Borne by the Customer Commissioning Type: To be agreed Kjdpfod Nmdkjx Af Todw Description: Notes: Manufacturer: VANGROENWEGHE Model/Type: TYPE F-300-COMBI/CE Year of Manufacture: 1998 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Delivery costs borne by the customer Commissioning Type: To be agreed Through-feed Sander VG TYPE F-300-COMBI-CE / 1998 High-performance Combi unit machine Contact roller and pad sanding Pneumatic oscillation and mechanical belt tensioning Motors: 7.5 + 1 HP / 380 V Abrasive belt dimensions: 300 x 1,900 mm

Sąlyga: naudotas, Tilting spindle moulder, table router, table milling machine - Spindle adjustment: height and angle - Tilting range: -3° to 45° - Drive: 4.5/5.5 kW - Speeds: 3000/4500/6000/9000/12000 rpm - Power feed unit Holz-Her with 3 rollers - Useful spindle length: 100 mm - Spindle diameter: Ø 30 mm - Max. cutter diameter: Ø 220 mm - Dimensions: 1540/1100/H1520 mm Ksdpfx Afsh Nvyzj Tedw - Weight: 962 kg