Klijavimo presas

Leim holz presse L 13000/1600/240

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Holtec pakuočių atpjovimo pjūklas Vario Cut su Holtec mechanizacija. Jörg Elektronik. Visiškas atliekų pašalinimas po pjovimo linija. Isdjw Smz Dopfx Af Istb

Sąlyga: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Iodpfevwfqqjx Af Istb Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Gamybos metai: 1996, Sąlyga: naudotas, Incubator with temperature control up to approx. 80°C, with internal dimensions of approx. 400 x 500 x 350 mm. Itjdpfx Afsbylq Hj Iob

Gamybos metai: 1988, Sąlyga: reikia remonto (naudotas), Mechanizacija prieš obliavimo stakles, skirta KVH/BSH – ilgiams iki maždaug 13 m. Ideali KVH ir BSH linija prieš obliavimo stakles. Išilginis atskyrimas – vienetinis išskirstymas. 4 vnt. reguliuojamų šoninių diskinio pjūklo skersinio pjovimo staklių. Pjovimo skerspjūviai: 180 x 220 mm, 150 x 300 mm. Pakanka vieno operatoriaus. Itjdsvbtpopfx Af Ijb

Sąlyga: paruoštas naudoti (naudotas), Platus obliavimo staklės pastovus stalas Didžiausias obliavimo plotis: 605 mm Obliavimo aukštis 2 pusėmis: 200 mm Obliavimo aukštis 4 pusėmis: 170 mm Obliavimo velenai su 6 peiliais Iki 24 m/min padavimo greičiui pakanka 3 peilių 3 peiliai dirba, 3 aštrūs peiliai laikomi atsargoje Papildomas agregatas: 5-oji darbo ašis horizontali 11 kW Ištraukimo agregatas, volų plotis: 350 mm Pasirinktinai: Itsdpfxewg S Tvj Af Ijb Pradinė obliavimo stotelė prie įėjimo Staklės parduodamos būklėje: A) kaip yra B) suremontuotos C) suremontuotos ir nauja elektra !! Šios obliavimo staklės pas savininką veiks iki 2026 m. vasario !!

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Vertical double-sided wood press by C.O.P.E. Two working areas, each measuring 620x110 cm. Iedpjudy A Nofx Af Iotb

Sąlyga: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Itodewtgcxspfx Af Ijb Fuse protection: 25 A Condition: used

Gamybos metai: 1982, Sąlyga: naudotas, In gutem Zustand Iodsdq Ug Ispfx Af Ijtb

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Iodpfx Afsw Sy T Hs Iotb Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: naujas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, dvipusis, Line for lengthwise joining with two milling machines. Press length 6,000 mm. The machine is new and has never been used. All corresponding tools are included with the machine. Ijdpfxswptnmo Af Iotb