Ruloninis konteineris

CONTAINER SCARRABILE USATO CON GRU E POLIPO

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 851 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 500 kg, bendras svoris: 17 000 kg, alyvos bako talpa: 70 l, Technical data baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of manufacture: 2023 Operating hours pump: 1,851 hours (as of July 2024) Press force: 70 t (equipped with a 70 t hydraulic cylinder, special equipment) Specific press force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special equipment) Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 13 seconds Theoretical throughput: 266 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive output: 22 kW Total connected load: 65 kW Tying: 4-fold vertical, fully automatic Throughput at a bulk density of: 30 kg/m³ approx. 5.5 t/hour 50 kg/m³ approx. 7.5 t/hour 100 kg/m³ approx. 9.7 t/hour Bale weight at a bale length of approx. 1.2 m: up to 500 kg, depending on material PLC: Siemens S7-1500 Operator panel: Schneider Harmony Press dimensions installed: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 17 t Tsdpfxsu Thbxe Ag Rof Special equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials of small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting challenging materials Technical data conveyor belt: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of manufacture: 2023 Drive output: 4.0 kW Belt speed: approx. 0.3 m/second Feed belt length: 2,679 mm Incline belt length: 6,866 mm Gooseneck length: 1,272 mm Incline: 35° Usable width: 1,400 mm Sidewall height incline belt: 800 mm Cleat height: 50 mm Cleat spacing: 750 mm Belt specification: EP 400/3, 3:1 (DIN Quality N) Overall height: 4,515 mm Transport dimensions overall: 11,148 x 2,502 mm (L x W) Technical data contactless personnel protection system: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of manufacture: 2023 Condition of the baling plant: Due to the low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of delivery: - Avermann baler, type AVOS 1410 BS-22/50, incl. wire tying stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Notes: Full documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Viewing is possible by appointment. We assume no liability for the technical data or any possible errors.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 250 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2024, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales pressed: 198,059 units (as of April) Main press ram force: 50 t Specific pressing force: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed chute dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, length variable Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 L PLC: Telemecanique TSX Micro Operator panel: Schneider Magelis Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (press only): approx. 16 t Condition of the baler: The machine underwent partial refurbishment and general maintenance in our workshop. After completion of the refurbishment, the baler was tested in operational mode and is now available for immediate sale. The following refurbishments were carried out: General work: - Machine cleaned, derusted, primed, and partially repainted - Wire entry marks in the press channel openings welded and smoothed Hydraulic unit: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil and air filters replaced - Leaking oil sight glass on the hydraulic tank replaced - All hydraulic hoses replaced Electrical system: - Program menu language set to English - Two key switches on the operator panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced Tedju Thhrepfx Ag Rsf - Wirthulator electrics renewed, connected, and tested Press ram: - All four guide rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled (cylinder tube honed, complete seal kit replaced), leak test performed - All wear-resistant plastic blocks on the press ram replaced Pre-press flap: - Both bearings on the pre-press shaft replaced - Both hydraulic cylinders disassembled, overhauled (cylinder tubes honed, complete seal kits replaced), leak test performed - Scraper flap on the pre-press replaced Tying unit: - Two complete needles with wire guide pulleys replaced - Needles adjusted and set - All wire guide pulleys in needle heads replaced - Twisting fingers replaced - Two twister shafts replaced - All eight wear plates on the twister unit, under the twisting fingers, replaced Scope of delivery: Only the baler is sold. Documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is complete and available. Inspection by appointment possible. We do not accept liability for the technical data or possible errors.

Sąlyga: naujas, didžiausias leistinas svoris: 29 500 kg, bendras svoris: 42 000 kg, ašių konfigūracija: 2 ašys, krovimo vietos ilgis: 6 100 mm, krovinių skyriaus plotis: 2 550 mm, bendras plotis: 2 550 mm, bendras aukštis: 300 mm, Gamybos metai: 2025, Įranga: ABS,

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 20 536 h, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, tuščias svoris: 16 000 kg, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput capacity at bulk density of: - 30 kg/m³: approx. 6.0 t/hour - 50 kg/m³: approx. 10.5 t/hour - 100 kg/m³: approx. 17.5 t/hour Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Press transport weight: 16 t Special equipment: - Wear-resistant floor made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small particle size - Control cabinet air conditioning - Machine base height increase: 200 mm Tjdpfx Agsu Thyps Rjf Note: The machine is currently located in our workshop and is being partially overhauled. We anticipate that the overhaul work will be completed by the end of October and the machine will then be tested and released for sale.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 000 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 750 750 750 mm, balo svoris: 500 kg, įėjimo įtampa: 400 V, bendras svoris: 7 500 kg, alyvos bako talpa: 500 l, galia: 30 kW (40,79 AG), tuščias svoris: 7 500 kg, įėjimo dažnis: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Bale size: 700 x 1,000 mm (W x H), adjustable length Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is operational; the drive motor is currently disassembled. Tjdpoic Rl Dsfx Ag Rsf

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Technical specifications: Tsdpfxoummw To Ag Rof Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Motorized adjustable back gauge: 1500 mm Motorized adjustable cutting gap Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side safety guard with light barrier at rear Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t We can only display a small part of our current range of used machines here. Please also visit our homepage! The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are in accordance with its age; used machines are sold without any warranty.

Gamybos metai: 2021, Sąlyga: naujas, Aluminum Inclined Conveyor Belt incl. Support Frame Inclined section starting from 50mm (adjustable) Discharge height 1500mm (adjustable) Belt width 500mm (adjustable) We supply our conveyor belts in PVC, PU, or rubber. PVC conveyor belt incl. carriers and corrugated sidewall Tedpfjhh Dbasx Ag Ref Drive: Motor 0.25kW (adjustable), speed 0.3m/sec Connection 220/240V, 50Hz, protection class IP54 Drive and components ready for connection, motor control optional 6x adjustable machine feet for alignment Corrugated sidewall: 40x35mm (adjustable) T-20 cleats – 400mm spacing (adjustable) 2-ply, especially cross stable Our core competence lies in delivering exactly what the customer really needs. We work closely with our customers to develop bespoke, individual solutions and supply suitable systems from our own production. B2hd9kmmdn Feel free to contact us by phone as well to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Sąlyga: labai geros būklės (naudotas), A-4200-Tebel Ostetank Ostetank, kapacitet 10.000 L, Alfa Laval - Tebel, god stand, 1 stk., lukket type med omrører, dobbelt kappe, isoleret. Tedpfjh A Hb Ujx Ag Rsf Varmekappe på den nederste halvdel af den cylindriske sektion • Cylinderen længde: 1.750 mm • Cylinderen diameter: 2.860 mm • Intern belysning • Mandhul med skydedør øverst • CIP-tilslutning • Udløb: 4" Udløbshøjde: 400 mm Minimumsniveau Vægt: 2.800 kg (Mål L x B x H): 3.350 x 3.000 x 3.200 mm

Gamybos metai: 2019, Sąlyga: beveik kaip naujas (parodų įrenginys), Aluminum flat conveyor belt incl. 4 suspension points Dimensions: 3000 + 520 x 105 mm Conveyor belt width: 400 mm PVC conveyor belt incl. cleats and wave edge * Optional with magnetic deflection roller at the end of the conveyor belt. Todpfx Agod Ra Trj Rof * Optional with supporting frame * Special designs in all configurations possible.

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), Output capacity: 24,000/h, belt speed: 0.5 m/s, formats: 0.25l GASTRO / 0.5l GASTRO / 0.7l GBD / 0.75l GBD, GASTRO, equipped with HEUFT SPECTRUM SX TI 36 sorting system. The plant was overhauled in October 2021. Tjdpfxehix Uks Ag Rof