Ekscentrinis presas - viena kolona

MÜLLER EXP 35 SV/HK

Būklė: naudotas, Gamybos metai: 1987, Pressure 35 t Outreach 220 mm Stroke 8-96 mm Stroke rate 120 strokes/min Ram adjustment 50 mm Table surface 580x440 mm Ram surface 305x170 mm Pass-through opening in table 215x175 mm Table height 870 mm Pin hole in ram Ø 40 mm Hydraulic clutch-brake combination Central grease lubrication Mechanical overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Dujdpfow E Nuusx Affsp Foot operation Height-adjustable table

Gamybos metai: 1972, būklė: naudotas, mašinos/transporto priemonės numeris: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Dusdpfx Aob Tdqueffep Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Dusdpfx Afjb U Hwpsfjp Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Engel Victory 80/45 Tech Clamping force: 45 tons, tie-barless Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200 Dusdpfx Ajh Rawbjffjp

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191523, spaudimo jėga: 490 kN, varžto skersmuo: 30 mm, -KOM 3086- Offered here is a used injection moulding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Djdpfx Afev Tb U Defsup Year of manufacture: 2013 Machine No.: 191523 Screw diameter: 30 mm Tie bar spacing: Tie-barless Location ring diameter: 125 mm

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Dodpsb U Hwnefx Affoup Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), A total of six used injection moulding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 35 g/PS, screw diameter: 22 mm, centring bore: 110 mm, mould opening stroke: 330 mm, control unit: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700 kN, screw diameter: 40 mm, centring bore: 125 mm, min./max. mould height: 190 mm/420 mm, tie bar distance X/Y: 305 mm/135 mm, mould opening stroke: 250 mm, control unit: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700 kN, injection pressure: 1,500 bar, shot weight: 117 g/PS, screw diameter: 35 mm, centring bore: 125 mm, min./max. mould height: 200 mm/400 mm, tie bar distance: 305 mm. 4) Arburg 221-75-350, year of manufacture: 1992, clamping force: 350 kN, injection pressure: 1,500 bar, screw diameter: 22 mm, centring bore: 110 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 221 mm. 5) Arburg 221-55-250, year of manufacture: 1991, clamping force: 250 kN, shot weight: 32 g/PS, screw diameter: 20 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 320 mm. Dujdpevb Hbfjfx Affsp 6) 2K injection moulding machine Arburg 221-75-350, year of manufacture: 1993, clamping force: 350 kN, injection pressure: 1,500 bar, shot weight: 38 g/PS, screw diameter: 22 mm, min./max. mould height: 150 mm/300 mm, tie bar distance: 221 mm. Includes 7-8 Arburg dryers, various injection units, AirComp compressor, fluid silicone mixing unit with Arburg control and Scheugenpflug. Documentation available. On-site inspection possible.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Engel ES 330/80 HLS Dusdpfjpdr Aiox Affep Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged platen: 660 x 560 mm Minimum mold installation height: 200 mm

Būklė: naujas, Gamybos metai: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Strokes: max. 260 1/min at full feed length Feed force: 90 N Available with mechanical control valve or optionally with electric valve (24V or 230V) Djdpfx Afj Ea U Hjfsup Many other band widths and feed lengths available.

Būklė: naudotas, Material width: 304.8 mm Material thickness: 0.12 – 2.2 mm Feed length: 304.8 mm Clamping force of holding gripper: 850 N Clamping force of feed gripper: 4410 N Feed force: 650 N Approx. machine weight: 0.15 t Duedpjcxxrxsfx Affsp Approx. space requirement: 0.7 x 1.05 x 0.6 m