"Muller Martini" tobulas segtuvas "Starbinder 3006/30" (1992 m.)

Müller Martini Starbinder 3006/30

Būklė: naudotas, Gamybos metai: 1992, Perfect binding line Müller Martini Year of manufacture: 1992 Consisting of: Book block feeder ITM Gathering machine Müller Martini 210-E Description: - Manual feed station - Number of gathering stations: 18 - Pump(s) - Setup element - Criss Cross delivery - Book block feeder: 3606 - Transfer to binder Perfect binder Müller Martini 3006 /30 Z Hour counter: approx. 14,700 Description: - Number of clamps: 30 Kdodpfevgt Dksx Alden - Main milling station - Roughening station - Exclusive dust extraction, machine was connected to central dust extraction system - Drive station for spine gluing unit - Cold glue spine gluing unit, interchangeable - Intermediate drying station (infrared): IRT - Drive station for second spine gluing unit - Hotmelt spine gluing unit, interchangeable - Premelter for spine gluing unit: Probag - Drive station for side gluing unit - Hotmelt side gluing unit, interchangeable - Gauze station - Stream cover feeder - Creasing station - Pump(s) - 1st pressing station - HF high-frequency dryer - 2nd pressing station - Delivery device (to the left) Conveyor section Müller Martini

Būklė: paruoštas naudoti (naudotas), Konica Minolta Accurio Press C 3080 su 1,9 mln. kopijų----- Patikrinta ir paruošta darbui! Įranga: - DF 706 - PF 707 M - HT 506 - FS 532 - IC 605A - SD 513 su CR 501 + TU 503 Kdodpfxsyy I Rkj Aldsn Galimybė įsigyti įrenginį be SD 513 modulio Kaip patyrę naudotų kopijavimo aparatų prekybininkai, esame įgiję tikrą pakavimo ir padėklų siuntimo patirtį, kad mūsų klientai gautų nepriekaištingos būklės įrenginius. Siunčiame kopijavimo aparatus, atkeliaujančius iš Konica Minolta France ir joje prižiūrėtus. Jei turite klausimų, nedvejodami klauskite. Mūsų įmonė siūlo didžiausią Konica Minolta gamybinių kopijavimo aparatų asortimentą bei vykdo pristatymus visame pasaulyje pagal užklausą. Prašome nedvejodami susisiekti dėl papildomos informacijos.

Būklė: naudotas, Gamybos metai: 1993, Technical details: Form plate – Length / Width: 500 x 400 mm Heating: Two-stage heating 4.6 and 6.0 kW Control: PLC Kodou Nu Hiopfx Aldjdn Operating voltage: 380 V (3x 20A) / 24 V DC Adjustable working height: 870 - 970 mm Total power requirement: 6 + 2.5 kW Machine dimensions approx. LxWxH: 2.8 x 1.1 x 1.3 m Weight: 570 kg Compact L-sealer with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL, COOLING STATION, AND SPECIAL COOLING FAN Mobile/transportable Operation in automatic mode as well as manual operation possible. Application areas/products: - Various brochures, plans, or other paper/cardboard items in DIN A5 / DIN A6 Suitable films: all centerfold/polyolefin shrink films up to 0.060 mm Sealing system = impulse sealing with Teflon-coated separating seam, adjustable Automatic product feed into the shrink tunnel Further details: - Tunnel passage width: 450 mm - Tunnel passage height adjustable to 100, 200, 300, and 400 mm - Heated tunnel hood length: 900 mm - Machine output depends on product and film: 5 to 20 cycles / minute (manufacturer specifications) - Max. film width (folded-centerfold) 550 / 550 mm at 25 - 50 μm - Frame dimensions 500 x 500 x 290 mm = max. package size Heating: - Two-stage heating 4.6 and 6.0 kW - Fan infinitely variable Cooling station: - Outfeed 300 mm - with fan Conveyor belt: - Feed rate 2.5 - 12 m/min - Infinitely adjustable as per description.

Būklė: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, Dviejų smūgių šalto štampavimo presas NATIONAL M5 Pusiau pramuštų detalių gamybai Visiškai veikiantis Ką tik suremontuotas! Nauja elektros instaliacija. Matricų skaičius: 1 Gaminamų detalių skaičius per min.: 300 Kniedės ilgis: 20 mm Išmušimo gylis (maks.): 5 mm Nupjovimo skersmuo: 5 mm Grindų plotas (plotis): 1.300 mm Grindų plotas (ilgis): 2.690 mm Pagrindinio variklio galia: 7,5 kW Grynoji masė: 3.100 kg Bruto masė: 3.700 kg. Ksdpfx Aletxni Nededn

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, This UV printer replaces conventional laser printers – including color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1015 C M Y K LC LM + White Print head: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer operation and image editing Dimensions: 2.30*1.98*1.34 m Weight: 650 kg Kdjdpfx Aed Ew A Uolden 360-degree applications: Bottles/round objects (optional at extra cost) A1+ format: 100x150 cm and up to 70 mm print height possible 7 x 500 ml ink can be supplied (optional at extra cost) + Varnish function available Software setup and printer instruction available on request for Germany/Europe (for an additional charge). Printing videos, etc., can be sent by email or WhatsApp upon request.

Būklė: naudotas, Three-Knife Trimmer Hörauf SN-140 Demand Year of manufacture: 2000 - Serial No. 405060080 Paper size (uncut): min. 80 x 60 mm - max. 410 x 315 mm Paper size (after cutting): min. 80 x 60 mm - max. 380 x 300 mm Maximum pile height: 80 mm Kdodpswnpm Nofx Aldjn Performance up to 20 cycles/minute Online video inspection possible via WhatsApp, MS Zoom, or Telegram In stock at Emskirchen/Nuremberg - Available immediately - Can be tested

Būklė: naudotas, Gamybos metai: 2005, Three-Knife Trimmer Kolbus HD 150.B Year of manufacture: 2005 Description: - Infeed from the right - Automatic magazine for inline production - Cut counter - Interchangeable knife cassettes (standard set) - Knife presetting device Kjdjvf Dtyopfx Aldodn - Set(s) of knife holders: 2 - Total knife sets: 2

Gamybos metai: 1991, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 44070/91-180102,

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Kdsdpeu Agh Sjfx Alden Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: naujas, Gamybos metai: 2024, veleno ilgis po galvute: 80 mm, sriegio ilgis: 55 mm, važiuojamoji greitis (maks.): 480 mm/min, E.W. MENN GW63 Flat Die Thread Rolling Machine with Rack-Type Dies Completely overhauled as new. Kodet Uucaepfx Aldedn New guides, vibrator, and new vibrating discharge system. New electrical system with inverter and PLC control. Thread size: M8 x 80/55 mm. Production rate: 480 pieces per minute. Thread diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Available for inspection and testing at HBR Srl - Calolziocorte (LC).