Kortelės gluers

Müller Martini 315 card gluer for 3680

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2010, Large, semi-automated Pace cutting system Polar 137 XT-Autotrim with stack lift, jogging unit with counting scale, gripper transport system, turning gripper, and unloader, built in 2010, with approximately 5.43 million cuts. Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogging unit by the operator, jogged, and then automatically transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as required. After cutting, the Transomat automatically places the layers onto a pallet, while cutting can continue simultaneously. Polar Stack Lift LW 1200-4 Platform dimensions: 80x126 mm Load capacity: 1,200 kg Equipped with steplessly adjustable reflex light barriers for automatic lifting or lowering. Jogging Unit RAH-4 with air removal roller and discharge for rear table feeding Usable format up to 75 x 105 cm. The jogged material is automatically discharged to the rear into the STR stack rack. Kodpfxjxd U Saj Abrjln The Autotrans gripper transport system then handles the layer transport to the rear table of the high-speed cutter. Sheet scale – Polar Counting Scale Avery Weigh-Tronix for creating precisely measured cutting layers. Gripper transport system POLAR Autoturn – Clamp transport for rear table loading and turning gripper takes the prepared cutting layer from the stack rack or buffer table. Via air tables, whose air cushion optimizes material flow, the material is directly conveyed to the rear table of the high-speed cutter and deposited precisely there. The gripping system holds the cutting layer firmly during transport, ensuring layers stay perfectly aligned even when pre-aligned. Cutting machine Polar 137 XT-AT with touch operation and Autotrim function for automatic waste removal under the front table during cutting. - Lowerable left side gauge (required for rear table loading), also enabling formats with a diagonal of...

Gamybos metai: 2022, Sąlyga: naujas, Vacuum conveyor with two suction belts Individually adjustable vacuum Speed up to 160 m/min Continuously variable speed control Height adjustable Also available in other lengths Inkjet base Kjdpfx Asch Hcasbrjln

Sąlyga: naudotas, Gamybos metai: 2007, The Horizon StitchLiner 5500 was manufactured by Horizon in 2007 and is a machine with a format of 350 x 500 mm, currently operating in Germany. This system includes two collating towers (VAC-100a and VAC-100m), an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 delivery conveyor. Key features include 20 stations, a U-shaped layout for efficient space utilization and straightforward monitoring, inline production from collation to finished product, and variable data processing capabilities for personalized printing. It offers fully automatic format adjustment for fast job changes and a touchscreen interface for user-friendly operation, even for less experienced operators. Specifications include the handling of sheet sizes ranging from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, supporting paper weights from 40–350 g/m². It processes from 8 to 200 pages (max spine thickness of 5 mm) and achieves output speeds of up to 5,500 booklets per hour. Technical details: trimming size (untrimmed) up to 350 x 250 mm (min. 140 x 103 mm); trimmed size up to 312 x 230 mm (min. 120 x 95 mm). Power supply: 400V / 50Hz. Delivery terms: FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 features the following components: - 2x VAC-100a and VAC-100m collating towers - ST-40 stacker - ACF-30 accumulator and folder - SPF-30 saddle stitcher - HTS-30 three-knife trimmer - TB-30 delivery conveyor Key features: - 20 stations - U-shaped layout for optimal space usage and easy supervision - Inline production from collation to finished booklet - Variable data processing for personalized print jobs - Fully automatic format adjustment for rapid job changeovers - Touchscreen interface for intuitive operation, suitable even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40–350 g/m² - Processing range: 8–200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour Technical details: - Trim size (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm Kedpfx Abjvfx Ncsroln - Trim size (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power requirement: 400V / 50Hz - Minimum space requirement: 5

Gamybos metai: 1968, veikimo valandos: 35 000 h, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7723238, 72x102 cm Tweeslag Stansmachine voor dun papier en licht karton tot 600 g/m². Uitstekend stabiele en zeer stille, snelle cilinderpers. Vaste verankering aan de vloer is niet vereist. Prijs is per machine, NIET voor het pakket. Bij afname van het pakket geldt een korting van 15%. Er zijn twee identieke machines beschikbaar vanuit dezelfde werkplaats, beide met dezelfde specificaties en onderhoudstoestand. Als specialist in dit type machine heb ik eerder machines aan dit bedrijf geleverd; zij hadden er al één, waardoor er op een bepaald moment werd geproduceerd met vier machines en zes of zeven Heidelberg cilinderpersen van de halve maat. Onderhoud is altijd door mijn bedrijf uitgevoerd, beide machines hebben een bekende geschiedenis, wat een pluspunt is. Door de krimpende grafische sector in Nederland en diverse vormen van rillen/perforeren/scoren op offsetpersen met snijplaten, is het bedrijf verhuisd naar een kleiner pand en heeft slechts één Condor behouden. Ksdpfxotyy Sfs Abrjln In mijn optiek is dit de beste, snelste en sterkste boekdrukpers die ooit in dit formaat is gebouwd! Met minder onderdelen dan een Heidelberg SBD en loopt veel soepeler. Dankzij mijn samenwerking met de KBA-fabriek en met name de heer Hans Bernhard Bolza-Schünemann—de ingenieur verantwoordelijk voor diverse innovatieve constructies binnen de Condor—werd een klein formaat Condor (65x95 cm), in zeer goede originele staat als complete drukpers en voorzien van enige 'patina', geschonken aan het Museum für Druckkunst Leipzig (juni 2002), vanwege het belang voor de ontwikkeling van de grafische industrie in de jaren ’60.

Sąlyga: geras (naudotas), Gamybos metai: 2002, Edge banding machine with jointing cutters, otherwise fully equipped. PU adhesive can be used. Kedegmn H Aopfx Abrjln

Gamybos metai: 2022, Sąlyga: naujas, Aluminium angle conveyor belt with substructure Conveyor belt length: 1000 mm horizontal + 2400 mm inclined Incline angle at the bend: 45° Discharge height: approx. 2000 mm Height of the horizontal section: 300 mm (top edge) PPU conveyor belt FDA food-compliant Conveyor belt type: EM 15/2 0+17 PU blue 7 white Belt width: 400 mm T20 cleats welded on – spacing 202 mm * Antistatic due to threads in the running side fabric Kledpfeht U Tdjx Abren Endless welded with staggered finger splice 30 mm high side wave edges, high-frequency welded on both sides * Edge-free zone on both sides for belt guidance in the inclined section Lateral arrangement: -70/+35/-5/+190/-5/+30/-70 mm Continuous support plate Drive: Motor approx. 0.25 kW Belt speed: approx. 0.3 m/sec Connection: 220/400 V, 50 Hz, protection class IP54 Our core competency is to deliver exactly what the customer really needs. We work closely with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grate magnets, metal separator, block magnet, filtration systems.

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 700571/99-280108, Max. working width (mm): 660 Klsdeixqb Sjpfx Abrjn

Sąlyga: geras (naudotas), Heidelberg Stahlfolder Ti 52 4/4/1 lankstymo mašina Mašina sukonfigūruota lankstyti iki 16 puslapių. Techninės specifikacijos: Minimalus popieriaus dydis: 105 x 150 mm Ksdpfjx Nc Atjx Abroln Maksimalus popieriaus dydis: 520 x 840 mm Didelio kupolo arba aukšto padavimo krautuvas Konfigūracija: – 4 kasetės pirmame modulyje Ti-52 – 4 kasetės antrame modulyje 2.Ti-52 – 1 elektroninis peilis – Mobilus išdavimo stalas Inverteriu valdoma lankstymo greičio reguliavimo sistema Kasetės triukšmo slopinimas Becker kompresorius Dvigubo lapo sensorius Elektroninis skaitiklis su partijų nustatymu Elektrinis išdavimo stalas su reguliuojamu išdavimo greičiu Pridedami atsarginės dalys, įrankiai ir dokumentacija Mašina gero techninio stovio, paruošta darbui.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 25.05.004, bendras ilgis: 9 500 mm, bendras plotis: 2 250 mm, bendras aukštis: 2 300 mm, įėjimo įtampa: 380 V, galia: 50 kW (67,98 AG), bendras svoris: 21 000 kg, tuščias svoris: 18 000 kg, suslėgto oro jungtis: 7 juosta, Įranga: dokumentacija / vadovas, Paper size 730 x 1060 mm and printing area 710 x 1040 mm. Paper thickness 0.05 mm - 0.5 mm. The set maximum speed (due to simulating the travel time of fast printing presses) is 4000 sheets/hour, but the machine is capable of much higher speeds for commercial work. Four-cylinder central impression cylinder that completes all four printing units in one gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment for extremely precise register printing. Attached is the original factory brochure. Fully dry ice cleaned and cylinders are in very good condition. The machine is offered strictly 'as is'. Maximum width is 225 cm, maximum height is 230 cm; shipment in a High Cube container is possible. The price is strictly fixed and based on removing components that we could sell separately, such as the Mabeg feeder with vacuum belt and the four-stage Baldwin stainless steel unit, with individual baths, mixers, and adjustable temperature for each color—meaning all four baths can be set to different temperatures and alcohol percentages. The machine has been dry ice cleaned. It was intended to play a prominent role in electronic paper printing, but due to excessive start-up losses, the project was canceled. The machine has been with us for three years now, and due to its size, I want it sold as soon as possible. Hence this very low price. It is an excellent machine. If the machine must be set up for testing and trial runs, this is possible at an extra cost of €10,000, of which €5,000 must be paid in advance as a conditional deposit. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data • Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) • Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) • Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) Kledpouf Sy Ajfx Abren • Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) • Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) • Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) • Max. speed: 4000 sheets/h • Floor space requirement (including access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) • Press height: 230 cm (90.55 in.) • Weight (incl. paper in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) • Total power requirement: approx. 50 kW • Compressed air supply: 6 – 7 bar

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Eight identical label dispensers are available. Speed: 0-80 m/min, throughput: 1000 labels/min, dimensions: length 700 mm, width 320 mm, height 500 mm, including accessories. Kljdoflmc Nepfx Abrsn