Gilių skylių gręžimo staklės

LOCH TB 2 15 30001KT

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 150 mm, bendras svoris: 12 000 kg, gręžimo skersmuo: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical specifications: Travels: X-axis longitudinal (table): 1800 mm Z-axis transverse (column): 1700 mm W-axis transverse (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm Kodpfx Afswcldae Iodg B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Approximate machine weight: 12,000 kg Technical data, accessories, and machine description are not binding. For further technical data, refer to the photos.

Sąlyga: geras (naudotas), Gamybos metai: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Kjdpjv Drigsfx Af Iodg Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travels: X-axis: 160 mm Z-axis: 450 mm Feeds: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Connected load Machine weight approx.: 3.7 t Space requirement approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. Kjdpfx Afeiuznuo Iedg All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: naudotas, Gamybos metai: 1988, Funkcionalumas: nepatikrintas, Berstorff mixing mill 400 x 900 mm More details in the attached description! Kjdor A Dfyjpfx Af Iodg

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Koded Dhw Nspfx Af Ijdg Line width in mixed mode: approx. 0.12 mm

Sąlyga: geras (naudotas), Gamybos metai: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Model: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run time: 24,814 h Technical data and equipment available on request. Kjdpfx Afewcxlwe Isdg

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), A 3-axis precision milling machine DMG Mori is available. Travel X/Y/Z: 200 mm / 200 mm / 190 mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001 mm. Machine dimensions X/Y/Z: approx. 1800 mm / 1550 mm / 1850 mm, weight: approx. 2200 kg, control: Siemens 840D, operating hours: 4979 h, spindle hours: 1041 h. The spindle was fully overhauled in 2023. An on-site inspection is possible. Kjdovi N D Sspfx Af Iodg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 52 455 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2501-0154, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 140 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 25 000 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 5 000 aps./min, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 3 m/min, greitas poslinkis Y ašis: 3 m/min, greitasis eiga Z ašyje: 3 m/min, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 4 000 aps./min, sukimo momentas: 239 Nm, strypo praėjimas: 80 mm, X ašies padavimo greitis: 165 m/min, Y ašies padavimo greitis: 165 m/min, padavimo greitis Z ašis: 220 m/min, bendras svoris: 10 500 kg, Įranga: dokumentacija / vadovas, The machine is still in use and can be viewed in operation at VOVU Machining in Uden. A total of 6 identical machines are available here. Equipped with Fanuc 310iS control. Kdsdour Hfzopfx Af Ijg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Control: Siemens Sinumerik 840D Working area Swing diameter over bed: 820 mm Swing diameter over cross-slide: 520 mm Kdedpfjxgdfbsx Af Isg Cross-slide travel: 600 mm Toolholder: Front: Capto size C6 – Multifix D1 Rear: Drilling rest with clamping claw Centre distance: 3000 mm Main spindle drive Power, digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically actuated, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter at front bearing: 190 mm Speed range (constant V): 1 – 1,800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter at front bearing: 210 mm Speed range (constant V): 1–1,600 rpm Cross-slide Feed range, cross: 0.001 – 1,000 mm/min Feed range, longitudinal: 0.001 – 2,000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse, cross/longitudinal: 5/10 m/min With centre distance: 4,000 mm Feed force, cross: 16,000 N Feed force, longitudinal: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill stroke: 280 mm Taper: 6 Mk Electrical equipment Three-phase current: 400 V, 50 Hz Design according to VDE and EMC guidelines EN 50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C power networks/industrial networks without RCD protection Dimensions Machine (L × W × H): 2.88 m + centre distance × 2.55 m × 2.32 m Machine weight (Centre distance / approx. weight in kg) 3,000 mm: 10,900 kg

Sąlyga: naudotas, Gamybos metai: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx. 4.5 t G E I B E L & H O T Z CNC Cycle-Controlled Precision Surface Grinding Machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal movement 900 mm): 800 mm Max. grinding width (cross movement 500 mm): 500 mm Max. grinding height under wheel approx.: 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Kodpfet Hxamex Af Iedg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical movement: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total power approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Features: • Easy-to-program GEIBEL&HOTZ grinding cycle control • Type SL with standard grinding programs such as flat and multi-flat grinding with roughing – finishing – sparkout – return, plunge grinding, dressing cycle with compensation, stop at loading station; all inputs/parameters via operator touchscreen and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronic components including SIEMENS OP 25 • Table movement is via rolling ring thread drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical movements by precision ball screw drive • Diamond dresser on the left side of the table beside the magnetic plate with automatic dressing cycle, compensation, pull-back and edge rounding on grinding wheels possible • MPM balancing system for the grinding wheel • Built-in permanent electromagnetic chuck approx. 800 x 500 mm, fine-pole • Wet grinding equipment with separately standing belt filter coolant filter • Full enclosure with electrically monitored sliding doors • Freestanding control cabinet, work light, various accessories, operating manuals Condition: Good to very good condition! Suitable for large-area stock removal due to wide grinding wheel! A video of the machine will be available here soon. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: Net - upon receipt of invoice