Izoliacinio stiklo gamybos mašina

Lisec TAL 60 SI and PS

Sąlyga: geras (naudotas), Gamybos metai: 1997, Technically in good condition and fully operational. Year of manufacture: 1997. Maximum turning diameter: 250 mm. Nlodpswn Dbnofx Aduji Maximum swing over bed: 530 mm. Maximum turning length: 500 mm. Dimensions (L x W x H): approx. 3315 mm x 1895 mm x 1900 mm. Machine weight: approx. 6 tonnes.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 13 450 mm, bendras plotis: 4 135 mm, bendras ilgis: 3 092 mm, keliamoji galia vienai sandėliavimo sekcijai: 400 kg, įėjimo įtampa: 400 V, keliamoji galia: 400 kg, Automated Warehouse Optimization Storage System Schäfer Logimat System Type: Logimat 3625 – 815 – 13,450/400 Serial No.: 916.0480-B2 (Logimat 5) Year of manufacture: 2016 Total load capacity: 2 x 30,000 kg Load per tray: 400 kg (evenly distributed) Tray dimensions: 3625 x 815 mm Number of trays (approx.): 91 units Touchscreen: 15.6 inch Shuttle dimensions (W x D x H): 4135 x 3092 x 13,450 mm Power supply: 400V-50Hz, 3L/N/PE, 24 A, 17 kVA This offer is valid while the system is still available Technical specifications for each Logimat: – Maximum total capacity of Schäfer Logimat: 2 x 30,000 kg – Maximum tray capacity (approx.): 91 trays, 400 kg each, evenly distributed – Tray dimensions: 3625 x 815 x 100 mm – Tray dead weight: 70 kg Nlodpfx Adjru A Atsuoi – Machine dimensions (W x D x H): 4135 x 3092 x 13,450 mm – System footprint (approx.): 12.8 m² – Capacity with 91 trays: approx. 269 m², each tray approx. 2.95 m² – Average tray retrieval time: 26 sec – Maximum tray retrieval time: 26 sec – Average tray exchange time: 51 sec – Maximum tray exchange time: 72 sec – Machine weight without trays: 5200 kg – Equipped with LogiTilt – Equipped with LogiPointer – Equipped with LogiGate – Equipped with LogiStainless Machines have been professionally dismantled and can be reassembled by the same technicians if required. Photos and videos of operation and dismantling available upon request by email. Price: special export price Price: excl. VAT Availability: in stock We have 3 Schäfer Logimat units in stock Machinehandel De Leeuw BV specializes in used paternoster systems, including Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW Njdpfoqprk Tjx Adujli - Apatinio veleno galia: 11 kW - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas - Atskiras variklis kiekvienam velenui - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Lisec IG-line for double and triple glazing units up to 2500 x 1600 mm, year of manufacture 1993–1999, consisting of: - RTV-38/16WE, washing machine infeed conveyor, 1993 - VHW-16V8, glass washing machine with 8 brushes for Low-E, 2 hot water tanks, 2 sand filters, and blower, 1993 - RTVB-16/16ST, washing machine outfeed conveyor, 1997 - Sofsolution line scanner - RTVB-11/16 ST, infeed conveyor for frame set, 1997 - RSVB-27/16, frame set section, 1997 Nledsr Iil Ejpfx Adusi - RTVB-27/16MZ, measuring station for gas filling press, 1997 - FPS-25/16U, argon gas filling press, 1997 - RTVB-22/16ST, press outfeed conveyor 1, 1997 - RTVB-22/16ST, press outfeed conveyor 2, 1997 - RTVB-27/16ST, press outfeed conveyor 3, 1997 - RTVB-11/16, infeed conveyor for cork applicator, 1997 - APK-3/16, automatic cork applicator, 1997 - RTVB-11/16, outfeed conveyor for cork applicator, 1997 - RTVB-11/16VE, infeed conveyor for sealing machine, 1999 - VL-1N/16, automatic sealing machine for double and triple glazing units, 1999 - VLA-25, VL extension with corner correction rollers, 1999 - DOS-1/PU, mixing and dosing station for PU, with nozzle removal device, 1999

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, stalčių skaičius: 30, EXTENDABLE RACK FOR GLASS PANEL STORAGE M80-30 YEAR OF MANUFACTURE 2025 / BRAND NEW We are a manufacturer of extendable racks for the storage of glass panels (crates with glass) and other sheet materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are designed and manufactured entirely in-house at our facility in Poland. The materials used for the production of our racks come with relevant durability certificates and are subject to continuous quality control. The rack consists of extendable, slightly inclined drawers. This racking system allows for up to 75% savings in storage space, as all compartments are built parallel to each other and spaced just 10 millimeters apart. We offer rack versions in various dimensions and load capacities. Following consultation, we can also manufacture racks with custom specifications to meet your individual requirements. The drawer inclination depends on installation and can be set to the left or right. We particularly recommend these racks for glass factories, stonemasons, furniture manufacturers, and advertising workshops seeking efficient use of space. The racks are delivered as a kit for self-assembly. Assembly is straightforward; with our many years of experience, we have developed a well-designed product. With the included assembly instructions, putting the unit together is hassle-free. Our technical support team is always available to assist as needed. Should you prefer a technician to handle assembly, this can be arranged for a fee. TECHNICAL SPECIFICATIONS – RACK MODEL M80-30 Application: for individual glass panels up to 255 cm x 160 cm Maximum glass panel size: 275 cm x 170 cm Number of compartments: 30 Width of glass support rail: 8 cm Length of glass support rail: 308 cm Material supporting the glass panels: wooden board 308 cm x 8 cm x 2.5 cm Overall height (A): 218 cm Overall width (B): 436 cm Overall depth (C): 317 cm Required floor space for correct operation: 27 m² Floor requirements: flat/level Number of bearings per compartment: 8 pcs Front wheel: Ø160 / reinforced polyamide Rear wheel: ball bearing steel wheel / rolled on profile Colour: RAL 7040 (grey) Corrosion protection: steel parts phosphated and powder-coated Nlodpjha E S Tsfx Aduei Permissible load per compartment: 900 kg Maximum total load: 27,000 kg Drawer inclination: left or right, depending on installation Assembly time: 14 hours Number of persons required for assembly: 2 DOCUMENTS SUPPLIED WITH RACK M80-30 - User manual - Assembly instructions - Data plate - Warranty: 12 months The product is delivered ready for immediate use. Our company supplies glass storage racks throughout the EU and to other countries as well.

Sąlyga: naudotas, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length alignment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated safety glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply to upper and lower cutting heads • Includes level monitoring for cutting oil canister • Automatic breaking roller for opening the lower cut • Lowerable unloading table for opening the upper cut • Separation device with hold-down fixtures, also suitable for LOW-E coated glass • Continuous special infrared heater, can be swiveled from below Nljdpfxsw Uptze Aduji • Thermal-mechanical separation device for separating multiple foils • Cutting line marking for diagonal cuts via visible laser • Glass flow direction: from right to left • Max. cutting length for laminated glass: 3700 mm • Max. glass size: 6100 mm x 3210 mm • Laminated glass thickness: 2x3 mm to 2x8 mm • Foil thickness: 0.38 mm to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: ±0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side rotation device • Price: On request

Gamybos metai: 2025, Sąlyga: naujas, Ultraschallbad UEC 300 ist eine Industrielösung zur Reinigung großer und schwerer, stark verschmutzter Teile. Die Maschine verfügt über einen pneumatischen Hub mit einer Tragkraft von 200 kg. Die Arbeitsfrequenz beträgt 28 kHz mit Sweep-Technologie. Das Gerät besteht aus einem Haupt-Ultraschallbad mit drei seitlichen Ultraschall-Piezowandlern sowie einem zweiten, darüberliegenden Bad mit Ölabscheider. Die Steuerung erfolgt über ein hochwertiges Touchscreen-HMI mit 3D-Anzeigen. Das komplette Bad ist aus säurebeständigem Edelstahl AISI304 mit einer Materialstärke von 2 mm gefertigt. --- Technische Daten : Plattformgröße: 900 x 570 mm Maximale Traglast: 200 kg Nutzbare Höhe: 400 mm Nodpfx Aogd Uifsduoli Ultraschallleistung: 3 kW (6 kW p-p) Ultraschallfrequenz: 28 kHz mit Sweep-Modus Heizleistung: 9 kW Ausstattung : 7" Touchscreen mit 3D-Benachrichtigungen Automatisches Wassernachfüllsystem Automatischer Liftbetrieb Füllstandssensor Hubpositionssensoren Deckelsensor Garantie: 2 Jahre WEITERE MODELLE AUF LAGER VERFÜGBAR

Gamybos metai: 1994, Sąlyga: geras (naudotas), Molecular filling machine / Diagonal filling Weight 520 kg Nedpjir Efuofx Adujli

Sąlyga: naujas, Gamybos metai: 2025, bendras plotis: 10 000 mm, bendras aukštis: 2 700 mm, darbo diapazonas: 2 500 mm, bendras ilgis: 10 000 mm, suslėgto oro jungtis: 10 juosta, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, bendras svoris: 4 kg, įėjimo srovė: 18 A, darbinis plotis: 1 700 mm, darbinio aukščio: 180 mm, padavimo ilgis X ašis: 2 500 mm, padavimo eiga Y ašimi: 1 700 mm, galia: 11 kW (14,96 AG), L'équipement de production de palettes pour 1 opérateur est conçu pour fabriquer des palettes standard et hors standard jusqu'à 2500 mm de longueur. Les planches sont chargées manuellement dans le gabarit de la palette. Les modèles de palettes sont facilement programmables et sauvegardés dans le système d'exploitation Windows. Le déchargement automatique des palettes facilite le travail de l'opérateur : il n'est plus nécessaire de décharger les palettes manuellement. Nsdpfx Aewm Ihcedujli Après avoir défini le nombre de palettes à charger, le robot ABB effectuera le déchargement automatique des palettes. Capacité de production par poste : 300 à 500 palettes par équipe.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, The WP CNC-T 2-axis cleaning machine is an excellent example of a device that combines a machine built using the most advanced components with high performance and the best price-to-quality ratio. This machine operates based on linear motor technology (magnetic cushion), which allows for long-term device operation. The tool set with which the machine is equipped enables the cleaning of the most common PVC profiles available on the market. The machine's foundation is a strong, stable frame made of structural steel. The control panel is equipped with a PC-class computer. Standard equipment: Working arm: The working arm is powered by a linear motor (there are no couplings, gears, racks, or lead screws). The linear motor moves at a set distance from the magnetic strip – no friction! Linear motors (for "X" and "Y" axes) are numerically controlled. Air cushion: The working arm, weighing several dozen kilograms, is supported during movement along the "Y" axis by a pneumatic actuator – it constantly provides pressure at a set value to balance the arm's weight. This solution allows for short cycle times without putting the machine's components at risk of rapid wear. Control panel: Independent control panel with a PC-class computer The operator menu is described with function keys – easy to use in production conditions. Profile outlines can be easily corrected from the control panel (the operator can make corrections in about 1 to 2 minutes) Other data: - Automatic working surface cleaning system - Automatic pressing and centering of material - Minimum and maximum profile processing height: 40 – 150 mm - Minimum and maximum profile processing width: 40 – 130 mm - Minimum element size: external 340x400 mm - VP – transport packaging BASIC SET OF UPPER UNITS: - Working unit for tools for cleaning grooved flat surfaces - Working unit for cleaning the rebate groove of the glazing bead - Drilling unit for gasket slots BASIC SET OF LOWER UNITS: - Working unit for tools for cleaning grooved flat surfaces - Working unit for cleaning the bevel surface of the glazing bead - Drilling unit for gasket slots ADDITIONAL SET OF LOWER AND UPPER UNITS: - Working unit with blade for cleaning flat surfaces without groove - Working unit with blade for cleaning flat surfaces without groove Nlodpfowhu Hhsx Aduei