Plokštės grąžinimas

LIGMATECH ZHR 05/R/105

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8118133, įvesties srovės tipas: trifazis, filtravimo plotas: 50 m², neigiamas slėgis: 3 365 Pa, bendras aukštis: 2 660 mm, bendras plotis: 1 550 mm, bendras ilgis: 3 800 mm, nominali srautas: 6 920 m³/val, įsiurbiamojo kolektoriaus skersmuo: 350 mm, įėjimo įtampa: 400 V, Maksimalus tūrio srautas: 7950 m3/h Nominalus tūrio srautas: 6927 m3/h, prie 3365 Pa Prisijungimo skersmuo: 350 mm Filtro plotas: 50 m2 Fsdpfxexyi Une Ab Ssft Dulkių klasė „M“, AWN 16 Cone Variklio galia (ventiliatorius): 11 kW Filtro regeneracija: pneumatinė-mechaninė Garso slėgio lygis: 70 dB (A) Įskaitant originalią SCHUKO valdymo spintą V24

Sąlyga: naudotas, Gamybos metai: 2008, Naudota mašina Pagaminimo metai: 2008 Būklė: mašina naudota Vokietijoje, reguliariai prižiūrima (paskutinis aptarnavimas Homag atliktas 2024/11) Įranga ir techniniai duomenys: Rušinės storis min.: 12 mm Rušinės storis maks.: 60 mm Mažiausi rušiniai (Ilgis × Plotis): 240 × 55 mm (kai storis 22 mm) / 100 mm (kai storis 60 mm) Briaunų storis min.: 0,3 mm (ritininė medžiaga) / 0,4 mm (juostinė medžiaga) Briaunų storis maks.: 3 mm (ritininė medžiaga) / 20 mm (juostinė medžiaga) Padavimo greitis: bepakopis reguliavimas 18–25 m/min (dažnio keitimu) Klijų tipas: EVA termoplastiniai klijai Klijų padavimas (vonia / kasetė / purkštukas): lydymo įrenginys su granulių talpa Klijų talpa / kasetės dydis: granulių talpa, lydymo galia 18–35 kg/h, automatinis lygio reguliavimas Įkaitimo laikas: apie 8–10 min. Krašto podavimo žurnalas (pozicijų sk.): 2 ritiniai (automatinis ritinių keitimas) Automatinis krašto keitimas: taip (automatiškai PC22 valdymu, galima perjungti rankiniu būdu) Priešfreza: 2 × 1,5 kW, 200 Hz, 12 000 aps/min, pneumatinis reguliavimas Prispaudimo zona: 1 priešprispaudimo volelis Ø 150 mm + 6 paskesnių prispaudimo volelių Ø 70 mm, automatinis reguliavimas Galų pjovimas: HL84 agregatas, 2 × 0,8 kW, pneumatinis reguliavimas (kampu / tiesiai) Lyginantis frezavimas: per priešfrezavimo agregatą, pneumatinis reguliavimas Radialinis frezavimas: FK13 profilinis frezavimo agregatas, automatinis 8 įrankių keitiklis (R = 2 mm) Kampinis/profilinis frezavimas: taip, su FK13 pneumatinis reguliavimas Grandiklis: integruotas į daugiafunkcę valymo įrenginį MN21 Poliravimas: poliravimo agregatas FA11 Prispaudimo blokas: KAL310/A20/S2 prispaudimo frezavimo agregatas, 2 × 3 kW Rušinės pašildymas: yra Atskyrimo skysčio purškimo įtaisas: viršuje / apačioje, modelis 2929 (F.01) Ištraukimo antgaliai: keli Ø 100 mm (kiekvienam agregatui atskiras ištraukimas) Valdymas: power control PC22 (pramoninis PC, woodCommander Windows XP embedded) Darbinė įtampa: 400 V, 50 / 60 Hz Atitiktis: CE atitinka ES direktyvą 98/37/EB Matmenys / vietos poreikis: apie 8 000 × 1 400 × 1 600 mm Svoris: apie 3 000 kg Nuotraukose matoma grąžinimo įranga nepriklauso komplektacijai! Prieinamumas: greitai Ffodpfxswx Aaqs Ab Sjt Sandėlio vieta: Lietuva

Sąlyga: geras (naudotas), Gamybos metai: 1990, Untha RS 30 modelio keturių velenų smulkintuvas iš žinomo gamintojo. 2 x 7,5 kW. Prieš 3 metus smulkintuvui buvo suremontuota pavara ir sumontuoti nauji pjovimo diskai. Nuo to laiko įrenginys beveik nebuvo naudojamas. Remonto kaina siekė 5300 €. Ffedpexpn Hnefx Ab Sjt

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: neveikiantis, UNTHA RS30 SB-460 Pagaminimo metai: 2007 Naudotas - Sugadintas Rotorių skaičius: 4 Malimo kamera: 460 x 500 mm Nauji peiliai: 1Z-66, 8Z-66 Fjdpfx Asxn Iwkjb Soft Variklio galia: 2 x 11 kW, 380 V, 50 Hz Naujos sieto skylės: Ø 30 mm Ilgis/Plotis/Aukštis: 1340/1250/1970 mm Svoris: apie 1100 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, juostinio pjūklo ilgas: 5 550 mm, pjūklo juostos plotis: 80 mm, įvesties srovės tipas: trifazis, pjovimo aukštis (maks.): 400 mm, stalo plotis: 1 060 mm, stalo ilgis: 800 mm, darbinio aukščio: 400 mm, įėjimo įtampa: 400 V, - itališkos gamybos - lamelių pjovimo juostinis staklės - nedažytas - labai gera būklė - naudotas pjūklas Ffedpfxow H Rq He Ab Sjt Pjūklas: - ratų skersmuo: 800 mm - didžiausias pjūklo plotis: 80 mm - didžiausias pjovimo aukštis: 400 mm - pagrindinis variklis: 11 kW - pastūmos greičio diapazonas: 2–40 m/min - pastūma su pneumatiniu spaudimu prie kreiptuvo - įvado metalinis slystantis volelis - pjūklo ilgis: 5550 mm - juostos atstumas nuo korpuso: 780 mm - sraigtinis juostos įtempimas - stalo matmenys: 1060x800 mm - darbinis stalas pasviręs 15° kampu - ištraukimo angos skersmuo: 120 mm - pjūklo drėkinimo sistema - kojinis stabdis - lieti ratlankiai - žvaigždės / trikampio paleidimas - maitinimas: 380V - matmenys ilgis/plotis/aukštis: 1600x1100x2400 mm - svoris: 860 kg Pastūma: - metalinis dantytas traukimo volelis - penki pastūmos greičiai su keitimu diržu - volelio aukštis: 30 mm - pastūmos variklis: 0,75 kW - spaudimas

Sąlyga: naudotas, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residues from wood, paper, plastics, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compaction, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Capacity: 50 kg/h (material-dependent) Throughput: 0.45 m³/h Briquette shape: octagonal, 125 x 70 mm Ffodpfx Aewqhwleb Set Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale on behalf of customer, ex location near 69124 Heidelberg, without dismantling, transport or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid potential misunderstandings, on-site inspections are possible and recommended by prior appointment Sale as is Technical specifications, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is provided on used machines; the goods are sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Sąlyga: naudotas, Martin T 60 Panel Saw Heavy-duty precision panel saw Axis positioning control with 5.7" touch screen Automatic scoring unit Motor 5.5 kW Fodpoxx R T Nsfx Ab Soft Saw blade tiltable 0 - 46° Saw blade diameter up to 400 mm Cutting length 3000 mm Cutting width with parallel fence 1250 mm Automatic width fence adjustment via NC control Width fence readout via touch screen Swiveling control panel above the table CE compliant version The machine is WORKSHOP-REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Sąlyga: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. Ffsdpow Aifzjfx Ab Sot The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Sąlyga: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING "MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHORM400 AXES Working area X-axis (reference side): 3,680 mm Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm Workpiece passage Z / Number of Z axes: 170 mm / 1 Workpiece length for pendulum operation: 1,650 mm Travel speed X-Y axes Pro-Speed: 85 m/min Z-axis speed: 30 m/min INSTALLATION Installed power: 62–82 KVA Compressed air requirement: 400 NL/min Extraction air requirement: 4,430 m³/h Extraction air velocity: 25 m/s Extraction port diameter: 250 mm GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for: - Vertical drilling on panel surfaces - Horizontal drilling on all four workpiece edges - Grooving with disc cutter - General milling operations (3-4-5 axes) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides. AXIS MOVEMENT All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes). MOTORS, DRIVES, AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish. CONTROL SYSTEM The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system: - 17" color LCD screen - QWERTY keyboard - Swiveling operator panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features: Programming - Parametric graphical programming - Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane) - Supported programming with graphical and syntax aids for drilling and milling operations Ffedpoxnldbjfx Ab Sst - Automatic optimization of drilling operations and tool change cycles - Option to shift panel zero-point for drilling on slanted or curved panel edges

Sąlyga: labai geros būklės (naudotas), CNC-controlled Flexible Automatic Throughfeed Boring and Dowel Insertion Line Min/Max Workpiece (Panel) Width (X-axis) with FTT: 240 / 3100 mm Min/Max Workpiece (Panel) Thickness (Z-axis) with FTT: 12 / 60 mm Min/Max Workpiece (Panel) Length-Depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading Station (Double Gantry Loader) "RBO" Model Advantage C B) Skewed Roller Conveyor "RBO" with Workpiece Rotation Device (Longitudinal-Crosswise) 90° C) Portal CNC-controlled Dowel Hole Boring Machine "BIESSE" FTT 800 Center A: No. 2 Electrospindles ISO 30 (each 3.7 kW) with tool holder magazine, each with 3 positions. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Turret) with 56 positions each Fjdpfxegvdkgs Ab Soft No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) D) Transfer Conveyor with Turner (180° top-side down) "RBO" Model Ribaltatore E) Portal CNC-controlled Dowel Hole Boring and Dowel Insertion Machine "BIESSE" FTT 800 R8 No. 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 Center A: No. 2 Electrospindles ISO 30 (each 4.5 kW) with 3 tool holder magazines each. Center B: No. 2 provisions for installation of 2 additional electrospindles No. 2 Tool Holder Magazines (Chain) with 60 positions each No. 4 upper boring units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD Dowel Insertion Unit No. 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Stacking Station (Double Portal Station) "RBO" Model Advantage SC