Sijos spaustukas 450 mm

LHS- Lastaufnahmemittel 1 to

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Dcjdpfx Aefg E Hpodmor Price on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 300 kg, bendras plotis: 1 260 mm, bendras ilgis: 1 500 mm, Universal dynamic balancing machine for rotors from 3 to 300 kg. CAB803 measuring system, class C guard, CE mark. Dcsdsu Nmppopfx Admjr

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 800 mm, matavimo diapazonas Y ašis: 1 800 mm, matavimo diapazonas Z ašis: 500 mm, garantijos trukmė: 12 mėnesiai, bendras aukštis: 3 000 mm, įvesties srovės tipas: trifazis, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available. Please feel free to contact us. Zeiss | UMC850 equipped with Renishaw PH10 and SP25 scanning system, including Renishaw Modus metrology software Retrofitted coordinate measuring machine with the latest Renishaw technology Year of manufacture: approx. 1990 / Modernized in 2022 – film-wrapped in light grey Measuring range XYZ: 800 x 1800 x 500 mm Measurement uncertainty MPE (E0): 2.6 + L/300 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder systems on all axes - Renishaw PH10 rotary indexing probe head with SP25-2 scanning system incl. probe changer FCR25-L6 (6-port) - Modus metrology software, latest version, with CAD STEP import incl. 1 year software maintenance - PC system with Windows 10, supplied with 2 x 27” TFT monitors (NEW) and height-adjustable desk - Control cabinet with up-to-date safety technology - Base plate We are happy to adapt the configuration to your requirements. Dodpfx Adevxhzusmscr Optional service packages on request: Delivery to site (free to edge of loading bay) | Commissioning | Calibration and acceptance testing according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | further options and custom configurations available upon request.

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice Dcsdpfsfg E Hlsx Admjr - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Gamybos metai: 2022, Sąlyga: beveik kaip naujas (parodų įrenginys), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main axis speed: approx. 2.0 rpm (other on request) Main axis torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Dcedpfx Aefw Ah Redmor Faceplate torque: approx. 1,500 Nm

Sąlyga: naudotas, Technical Details: Spindle diameter: 130 mm Drilling depth: 1,380 mm X-travel: 2,500 mm Y-travel: 1,600 mm Z-travel: 380 mm W-axis: 900 mm spindle feed U-axis: 320 mm facing slide feed Control system: on request Tool holder: ISO SK50 Speed – facing slide: 4.5–180 rpm Drive spindle speed: 4.5–900 rpm Dodpfxovr S Uls Admjcr Feed – x/y: 5–2,000 Total power requirement: approx. 40 kW Machine weight approx.: < 35 t plus auxiliary equipment The machine can be offered in four different sales options. Please choose! 1. The machine is in as-new mechanical condition, as it stands. 2. The machine as it stands, including plate table 4,000 x 2,000 x 300 mm = Stock No. 1101081 3. The machine rewired, with new control cabinet, digital readout, 4-axis, Siemens AC drives, Siemens axis motors (50A/31Nm) with 12 month warranty on all new parts. 4. Additional accessories can also be optionally offered, e.g. coolant system, chip conveyor, enclosure, etc. Please contact us to discuss these options.

Sąlyga: naujas, Thread diameter M3 - M8 mm Electric tapping machines for threads M3 - M8, adjustable angle. Comes with 5 quick-change chucks with slip clutch. The following parameters are adjustable via display: variable speed, adjustable depth, material selection, main rotation direction, thread type selection. Dedpfofg U Snox Admscr Optional accessories: - Clamping table with T-slots: 990x700x800 mm. - Magnetic base.

Sąlyga: naudotas, Gamybos metai: 1973, Spindle diameter: 130 mm Dcjdpfx Ast Hwt Ssdmjr X travel: 3000 mm Y travel: 2000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3000 mm Y – Spindle head vertical: 2000 mm Z – Spindle stroke: 1000 mm Table plate (lower): 3300 x 2400 mm Load capacity per m²: 10 t/m² Built-up table approx.: xx,000 mm Min./Max. position of work spindle above table: 770 / 2770 mm Feed: 0.9 – 2000 mm/min Rapid traverse for spindle head and column: 5000 mm Quill feed: 0.5–1200 mm/min Speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Infinitely variable spindle speeds and feeds, separately motor-driven feeds - Travelling operator platform, pendant control panel, hand-held remote, platform - Hydrostatic guideway in column traverse - Clamp plate 3,200 x 2,500 mm planed, with T-slots; add-on table approx. 1400 x 2600 x 900 mm high, one side face machined - Hydraulic clamping for column/carriage, motorized tool clamping - Extensive accessories, particularly tool holders with and without tools Separate chip extraction unit, clamping aids, 1 clamping angle plate and plates, and much more

Sąlyga: geras (naudotas), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas Chamber Furnace Type 003.05 With charging trolley Maximum temperature: 200 °C Dcodpfx Aed Spx Dodmor Approximate internal dimensions (W 1900 mm x D 2950 mm x H 1800 mm) Further items – new and used – can be found in our shop! International shipping costs upon request!

Sąlyga: geras (naudotas), Gamybos metai: 2014, Machine type: 3D CNC coordinate measuring machine (CMM) Brand: Wer Djdpfxjv R Uzle Admscr Model: Scopecheck 400/400/300/FB/Z