Formavimo staklės

Leadermac Platinum 623

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. Bodpow Sy T Hjfx Abfjlc POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 450 mm, pjovimo aukštis (maks.): 100 mm, pjovimo plotis (maks.): 245 mm, darbinio aukščio: 100 mm, įvesties srovės tipas: trifazis, – Year of manufacture: 2001 – Optimization – Cross-cutting – The machine is equipped with additional tables, allowing for a maximum cutting length of up to 6,500 mm (currently set to 3,400 mm) – 8 cutting lists TECHNICAL SPECIFICATIONS: Blodpfowtzrhsx Abfsc – Maximum cutting length: 6,500 mm (currently 3,400 mm) – Minimum workpiece length: 300 mm – Maximum cutting height: 100 mm – Maximum cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Maximum feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material clamping – Five ejectors – Intelligently controlled waste chute – Vario Speed system – Total machine length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Sąlyga: naudotas, Technical data: Max. planing width: 630 mm Max. planing height: 250 mm Cutterhead diameter: 120 mm Number of knives: 4 1 feed roller in the table Feed speed: 6–18 m/min Electric table lifting Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1300 mm Width: 980 mm Height: 1120 mm Bodpfx Abelp N Tyefolc

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Guilliet LKT 630 Thickness Planer Working width: 630 mm Working height: 300 mm 4-knife cutterhead Cutterhead with traditional knives Cutterhead diameter: 120 mm Height adjustment programmer Two feed speeds: 8-16 m/min Total power: 8.5 kW CE certificate Bedencbh Ujpfx Abfslc Year of manufacture: 2006 Weight: 950 kg

Sąlyga: labai geros būklės (naudotas), darbinis plotis: 250 mm, obliavimo aukštis: 140 mm, ašies skersmuo: 50 mm, obliavimo plotis: 250 mm, darbinio aukščio: 140 mm, padavimo variklio galia: 30 000 W, veleno greitis (maks.): 6 000 aps./min, aukščio reguliavimo tipas: hidraulinis, įvesties srovės tipas: trifazis, ašies skaičius: 9, įėjimo dažnis: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Working height: 140 mm, Spindle diameter: 50 mm, Feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-Bottom (11 kW) - with hydro clamping 2-Right (9 kW) 3-Left (11 kW) 4-Right (9 kW) 5-Top (15 kW) - with hydro clamping 6-Bottom (7.5 kW) - with hydro clamping Bedpoq Au Tljfx Abfslc 7-Top (7.5 kW) - with hydro clamping and straight jointer 8-Top (11 kW) - with hydro clamping and straight jointer 9-Bottom (11 kW) - with hydro clamping and straight jointer 11 powered rollers in the table

Sąlyga: naudotas, Unladen weight: 6,500 kg Dimensions (L x W x H): 590 x 260 x 190 cm Price: On request - Documentation available: No - CE Certificate present: No - Number of spindles [pcs]: 6 Bedpfxsxlthij Abfolc - └ Spindle 1: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Tool included: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Infeed table length [mm]: 1570 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 - Extraction port diameter [mm]: 120 - Options: Automatic feed system - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs]: 2 Financial Information VAT: The stated price is exclusive of VAT VAT/margin taxation: VAT deductable for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels