Hidraulinis presas

Lauffer RPT 40

Sąlyga: geras (naudotas),

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, bendras svoris: 35 000 kg, spaudimo jėga: 250 t, įvesties srovės tipas: trifazis, galia: 30 kW (40,79 AG), perforavimo jėga: 250 t, įėjimo įtampa: 200 V, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160 t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Die Height (adjustable): 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30 kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Ppedsu Dxb Tspfx Ah Hsl Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optionally available with decoiler and straightening machine.

Sąlyga: geras (naudotas), Manufacturer: OMERA Type: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Throat depth, horizontal (HOR): 670 mm Throat depth, vertical (VER): 940 mm Stroke cylinder: 350 mm Ppjdokvnumspfx Ah Hjl Column diameter: 200 mm Specifications Metric / US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Gamybos metai: 2004, Sąlyga: dilaminuotas dirbtuvėje (naudotas), No. 2054 Psdpeiyx Uzjfx Ah Hspl 1 used, partially overhauled, and function-tested Alphatec extruder, type AE-S 75.28 Screw diameter: 75 mm – 28 L/D Drive: 75 kW AC Screw speed adjustable up to 80 rpm 1x degassing zone with vacuum pump Installed heating capacity approx. 30 kW 3x temperature control zones for downstream equipment Control cabinet – NEW control system – type Inspection possible at our facility in Wuppertal. Further extruders available.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection Pedpogpxc Ssfx Ah Hepl - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Sąlyga: naujas, High-performance thread tapping machine with leadscrew device. Safety feature to prevent tool breakage. Programs for single and continuous cycle operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single cycle operation. Easy leadscrew change via quick coupling. Drilling capacity: 15 mm Thread cutting capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Pjdpfx Ahofrlnds Hjpl Spindle-to-table distance: 185 to 541 mm Table dimensions: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard equipment. Column available 200 mm longer: 14154

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Podpfjfxyhfjx Ah Hopl Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Sąlyga: naujas, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses Ppsdsfv Awaspfx Ah Hjl deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and reduced air consumption

Sąlyga: naujas, Zeer krachtige industriële polijstmachine Ppodpfsga Twxex Ah Hel Twee uitvoeringen: - Motor ----- 900W - 230V - 1 Fase - Motor ----- 900W - 400V - 3 Fase Polijstschijven D x B ----- 200 x 20 mm Toerental ----- 2850 omw/min Asmaat ----- 16 mm Verpakkingsmaten ----- 620 x 320 x 340 mm Gewicht ----- 20 kg Inclusief gemonteerde harde en zachte polijstschijf OPTIE * Onderzetkast Prijs: € 99,00 ex btw

Sąlyga: naujas, MAXION BT 20 Bench Drill Powerful MK2 machine featuring an easy-scroll control wheel and large display. Digital drilling depth, piece counter, fine adjustment for drilling depth, and LED light all come as standard equipment. Thus, the new BT20 combines innovative features with proven drive technology. Technical Data: Normal drilling capacity: 20 mm Thread cutting capacity: M 16 Spindle: MK 2 Drilling depth: 100 mm Throat: 215 mm Distance spindle/base plate: 185 – 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 990 mm Weight: 120 kg Motor, pole-changing: 0.6/1.2 kW Power supply: 400 V/50 Hz Two spindle speed ranges available: MAXION BT 20 (M00027) Infinitely variable spindle speeds: 100 – 1,800 rpm MAXION BT 20 (M00028) Infinitely variable spindle speeds: 240 – 3,600 rpm Pedpfx Asf Nrbfoh Hepl Optional Accessories Drilling kit Thread cutting device with digital depth display Column 200 mm longer Cross table MF3 Base cabinet Electric cooling system Note: ALSO AVAILABLE AS COLUMN DRILLING MACHINE