Centrinė tekinimo ir veleno tekinimo staklės

LACFER C-R-1-215

Sąlyga: beveik kaip naujas (naudotas), Set, packed in wooden crate, screw and cylinder barrel for 150 mm extruder nitrided feed section, screw with shearing and mixing section Gbodsdm Aghepfx Abdog

Sąlyga: naujas, Continuous drilling capacity in St 60: 15 mm Nominal drilling capacity: 18 mm Thread cutting capacity: M8 Spindle: MT 2 Gbjdpfjb Eldnox Abdsg Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 – 4,000 rpm Spindle speeds for thread cutting: 200 – 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipped with a full-featured thread cutting device and programmable digital display Machine in stock and immediately available

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 280 mm Turning length: 1,500 mm Distance between centers: 1,500 mm Swing diameter in gap: 730 mm Gbodpfx Aeu Ixznjbdsg Spindle bore: 65 mm Speed range: 25-1,250 / 32-1,600 / 36-1,800 - 18 steps rpm Feed range: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 200 mm Total power requirement: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (end position switch clutch not functional, manual shut-off required) Top slide with 4-position tool post Steel plate Ø 705 mm with offset threaded holes

Sąlyga: geras (naudotas), Gamybos metai: 1956, Heavy-duty lathe, lathe, engine lathe, lead screw and feed shaft lathe - Manufacturer: Weisser, Lead Screw and Feed Shaft Lathe Type PF200 - Turning length: 1340 mm - Swing diameter over bed: 420 mm - Swing diameter over cross slide: 240 mm - Spindle bore: Ø 41 mm Gjdpjtzf N Refx Abdebg - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock quill taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 22012101118, veleno skylė: 21 mm, centro aukštis: 100 mm, tekėjimo skersmuo: 200 mm, įvesties srovės tipas: Oro kondicionierius, tekinimo skersmuo virš slankiojančio stalo: 110 mm, įėjimo įtampa: 230 V, veleno greitis (maks.): 2 500 aps./min, sukimosi greitis (maks.): 2 500 aps./min, sukimosi greitis (min.): 150 aps./min, veleno greitis (min.): 150 aps./min, galinis spintos įvorės tvirtinimas: MK 2, veleno tvirtinimas: MK 3, bendras plotis: 425 mm, bendras ilgis: 830 mm, bendras aukštis: 360 mm, Griebtuvėlio eigos ilgis: 65 mm, Įranga: sūkių greitis be galo kintamas, Darbo sritys Didžiausias ruošinio aukštis: 100 mm Didžiausias atstumas tarp centrų: 300 mm Didžiausias apsisukimų skersmuo virš planšlito: 110 mm Gulto plotis: 100 mm Sūkio dažnių sritis Sūkio greičio valdymas: elektroninis reguliavimas Sūkio dažnių skaičius: 2 Sūkio dažnių sritis: 150–2500 aps./min Elektriniai duomenys Pavaros variklio galia: 0,6 kW Maitinimo įtampa: 230 V Dažnis: 50 Hz Standartai ir sertifikatai Standartas: DIN EN 55011 EMC klasė: C1 Velenas Veleno skylė: 21 mm Maks. įrankio laikiklio aukštis: 12 mm Griebtuvo praleidimo skersmuo: 20 mm Veleno kūgis: MK 3 Gręžtuvo atrama Gręžtuvo atramos kūgis: MK 2 Gręžtuvo atramos pinolės eiga: 65 mm Žingsniai Metrinis žingsnis: 0,25–3 mm/aps. Metrinių žingsnių skaičius: 14 Colinis žingsnis: 44–8 sriegių/1" Colinių žingsnių skaičius: 12 Važiavimo eiga Viršutinio skersinio eiga: 55 mm Planinio skersinio eiga: 75 mm Gulto skersinio eiga: 300 mm Padavimo eiga Išilginio padavimo sritis: 0,1–0,2 mm/aps. Išilginio padavimo skaičius: 2 Gbjdpfx Asw Imhvebdeg

Sąlyga: naujas, mašinos/transporto priemonės numeris: Baureihe GSP, When processing long pipes and profiles, conventional granulators encounter significant challenges. In most cases, pits or platforms are required to enable the feeding of long and bulky parts. For this reason, ZERMA developed the GSP series. Thanks to the nearly horizontal feed hopper, long parts can be fed in easily, and the risk of blockage is eliminated since the machine feeds automatically. If the grinding chamber becomes overfilled, no additional material is accepted until the machine can continue operating without motor overload. Gedpfx Asghgftobdebg ZERMA also offers a wide range of options, such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Sąlyga: naujas, Gamybos metai: 2025, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as tapping threads up to M12 mm. With a milling capacity of up to 80 mm width and keyway milling up to 22 mm, this machine ensures versatile use. The ZX7045 B1 DRO variant is distinguished by an automatic spindle feed, increasing operational efficiency. Additionally, it is equipped with digital readout for enhanced accuracy, and a cooling system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals seeking high quality and performance in metalworking. Product Features: - HEAVY, STURDY CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTATING HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL SPECIFICATIONS: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm Gbjdpeud H H Usfx Abdsg SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORK TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX SPINDLE TO TABLE DISTANCE: 445 mm SPINDLE TO COLUMN DISTANCE: 260 mm TRAVEL X/Y/Z AXIS: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW (2.5 HP) POWER SUPPLY: 400 V WEIGHT: 350 kg Available Accessories: - Drill chuck arbor MK4/B18 - Digital readout - Hand tools - Drill chuck 3-16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Sąlyga: geras (naudotas), Diesel engine, drive motor, marine diesel, injection pump, fuel pump, diesel fuel injection pump Gbedpjh It Trjfx Abdjg - Manufacturer: Bosch, Injection pump for 6-cylinder diesel engine - Type: PES6R120/720LV B 403 860 177 RQV300-900 RV - Individual components: see photos - Quantity: 2 injection pumps available - Price: per unit - Dimensions: 460/215/H325 mm - Weight: 32 kg

Sąlyga: naujas, Gamybos metai: 2025, Swing diameter over bed: 330 mm Swing diameter over cross slide: 210 mm Turning length: 1,000 mm Centre height: 167 mm Spindle bore: 40 mm Drive power: 2.2 kW Godpfowp Tq Usx Abdsbg - New machine - with 3-axis ACU-RITE digital readout and MULTIFIX quick-change tool post, size MA * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Sąlyga: naujas, TC 205 x 1000 Centre Height: 205 mm Swing Over Bed: 410 mm Distance Between Centres: 1000 mm Bed Width: 260 mm Spindle Nose: DIN 55029 (Camlock) 9, Size 6 Cross Slide Travel: 220 mm Top Slide Travel: 125 mm Spindle Bore: 52.5 mm Spindle Speeds: 20 - 3000 rpm Speed Control: Infinitely variable Mechanical Gear Stages: 2 Motor Power: 3.75 kW Coolant Pump: 0.13 kW Longitudinal Feed Z: 0.05 - 1.7 mm/rev Cross Feed X: 0.025 - 0.85 mm/rev Whitworth Threads: (45) 2 - 72 TPI Metric Threads: (39) 0.2 - 14.0 mm Diametral Pitch Threads: (21) 8 - 44 DP Module Threads: (18) 0.3 - 3.5 MP Tailstock Quill Diameter: 52 mm Tailstock Taper: MK 4 Quill Stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 gear stages) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast iron base - Adjustable precision tapered roller bearings in the main spindle - User-friendly feed gearbox with large feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable bridge section Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four holders - High rear splash guard and integrated LED trough light - Pull-out chip tray to the front - Slip clutch Gbedsir If Depfx Abdjg - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine mounts (1 set of 6 pieces) - Two emergency-stop buttons - Foot pedal with double braking system (mechanical and electrical) - Chuck guard, tool post guard, and leadscrew/feed rod cover with safety interlocks in accordance with CE European safety standards - Coolant system - 2 fixed center points - Reducing sleeve for main spindle - Operating tools - Operating tools in tool box - Operating instructions with spare parts list