Kombinuota kontaktinė juostinė šlifavimo mašina

LÖSER DP 15

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Hsdpfspugwijx Ab Soni Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. Hnedjtmqi Dopfx Ab Soi The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Turima 2024 m. atnaujinta (RPS 376/2+2) Loeser becentrinė apvali šlifavimo ir poliravimo juostinė staklė. Šlifavimo/poliravimo stotys: 2/2, šlifavimo diapazonas: 10mm-120mm, juostos matmenys X/Y: 3000mm/200mm, padavimo greitis: 15m/min, staklių matmenys X/Y/Z: apie 3500mm/2000mm/2200mm, svoris: apie 2500kg. Yra dokumentacija. Galima apžiūra vietoje. Hedpfx Asxhnr Ijb Sjni

Būklė: naujas, Gamybos metai: 2025, bendras plotis: 2 000 mm, bendras aukštis: 2 000 mm, bendras ilgis: 1 620 mm, darbinis plotis: 1 100 mm, bendras svoris: 1 000 kg, galia: 12 kW (16,32 AG), įėjimo srovė: 20 A, maks. lakšto storis: 120 mm, plieno lakšto storis (maks.): 120 mm, Deburring up to 1100 mm. Deburring of metal-cut parts up to 1100 mm width. The DM1100 Z processes and deburrs light metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide belt station, which can be used for deburring parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing and can run both standard abrasive belts and non-woven/Scotch belts. Hjdpfetzfpkex Ab Soni DM1100 Z Working capacity (mm): 1100x120 Number of belt stations (Z): 1 Abrasive belt dimensions (mm): 1100x1850 Abrasive roller specifications: Ø186mm Abrasive belt speed (m/s): 8–22 Feed speed (m/min): 1.5–10 Abrasive belt motor per head (kW): 11 Feed motor (kW): 0.18 Total power (kW): 12 Power consumption (A): 20 Dust extraction port per head (Ø mm): (1x) 152 Dimensions (mm): 1620x2000x2000 Weight (kg): 1000

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 102 mm, bendras ilgis: 2 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 4 000 kg, darbinio aukščio: 950 mm, ruošinio ilgis (maks.): 102 mm, Double-sided deburring in just one pass—naturally with 100% reproducible results and precise processing of both inner and outer edges—this is what only the EdgeRacer 1500 D offers you. Hnodpfx Aeucw Rbjb Soi The EdgeRacer 1500 D, which deburrs on both sides, is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with ribs, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brush units, operating from above and below, can be adjusted independently. Thanks to roller conveyor transport, the infeed can occur either below or above conveyor level.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, maks. lakšto storis: 102 mm, bendras ilgis: 1 300 mm, bendras plotis: 3 100 mm, bendras aukštis: 2 600 mm, bendras svoris: 2 600 kg, praėjimo plotis: 1 500 mm, ruošinio aukštis (maks.): 102 mm, One machine for everything: removing slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes EdgeRacer the Grinder effortlessly removes slag formed on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted to almost touch the underside, allowing the steel pins to hammer off the slag. Powerful deburring and precise edge rounding EdgeRacer® the Grinder easily removes stubborn punching burrs and laser beads/splatter. You can also adjust the brush feed to define the level of edge rounding required. Hnodswzybkjpfx Ab Sji Deburring and edge rounding of thin sheets and 3D workpieces Deburr thin sheets or sheets with cutouts. The grinding brushes can be positioned below the transport level, ensuring the entire workpiece edge is processed. The oxide-disc allows for removal of oxide layers from both inner and outer contours. Full working width or double performance – optimally adjusted to your requirements Depending on the width of the parts to be processed, you can select between two processing modes. Choose single-row operation to fully utilize the working width, whether for wide parts or for parallel loading. To optimize tool wear, the brushes automatically change their positions. For narrower workpieces, select double-row operation for dual processing in a single pass.

Būklė: labai geros būklės (naudotas), Serija 12-225-WRD Hnsdpfxeymlfdo Ab Sji 1 stotelė: šlifavimo juosta uždegų ir lazerio taškų pašalinimui 2 stotelė: diskas lengvam briaunų užapvalinimui Praėjimo plotis: 225 mm įskaitant TEKA ištraukimo sistemą

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1200 x 1650 mm Weight: 440 kg Total Power Requirement: 6.5 kW Brush Machine RUSTOMAX OPTIMAT 400 - Working width: 400 mm - Max. material height: 300 mm - Working length: 1200 mm - Brush diameter: 190 mm - Brush speed: 1,500 rpm - Spindle diameter: 40 mm - Number of brushes: 2 pcs (Metal + Nylon) - Max. feed belt speed + infinitely adjustable: 0 - 10 m/min - Working height: 940 mm + 50 mm - Suction socket diameter: 2 x 120 mm Hnsdpfx Abev A Hdij Sei - Total power: 6.5 kW - Voltage: 400V / 50Hz - Overall dimensions: L = 1300 mm, W = 1200 mm, H = 1650 mm - Weight: 440 kg