Platus juostinis šlifuoklis

NS Maquinas DM 1100 Z

Sąlyga: naujas, Gamybos metai: 2025, DM1100 Z – NEW DESIGN – at €29,800,-- Deburring up to 1100 mm width. The DM1100 Z refines and deburrs lightweight metal sheets cut by laser, punching, or shearing. Nsdpfxjimdmto Af Ijcl This machine features a single wide-belt station, which can be used for deburring parts measuring from 50×50 mm up to 1100 mm in width. The DM1100 Z is also suitable for surface finishing and can be operated with both standard abrasive belts and nonwoven/Scotch belts. With the additional table, the new DM1100 Z can be integrated with an existing DM1100 C edge rounding machine. We also offer a parts return system for this machine.

Sąlyga: naujas, Continuous drilling capacity in St 60: 15 mm Nominal drilling capacity: 18 mm Thread cutting capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Infinitely variable spindle speeds: 200 – 4,000 rpm Spindle speeds for thread cutting: 200 – 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Ncedpfjb Eldnex Af Ijl Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipped with a full-featured thread cutting device and programmable digital display Machine in stock and immediately available

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. Ncedsd Ixadspfx Af Ijl The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Complete robotic welding cell with turntable and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Includes welding gun (Dalex, new in 2018) with cooling system (closed-loop water cooling) A complete second welding gun (brand: ARO) is also included Dedicated cooling unit integrated within the system Automatic turntable with 10-position indexing (currently configured for 5 positions for the ongoing product) Workstation for loading and unloading parts is well-lit and secured with light curtains The entire system is controlled via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components are housed within an enclosure with a safety door The system can still be inspected in operation. Ncedpjnr E Enjfx Af Iel

Gamybos metai: 2021, Sąlyga: naudotas, KR Quantec 6 ašių robotas su KRC4 valdymu ir roboto valdymo pultu 12 m Smart Pad, 3100 mm darbinis nuotolis, 20 kg kėlimo galia Išorinis ašies modulis susietai sukimosi ašiai, matematiškai susietas Kuka ArcTech Basic paketas + 2 lygio (Level 2) išplėstinės funkcijos TouchSense technologija sumažinanti detalių tolerancijas Kuka Wiresense modulis Švytuojant, srovės šaltinio įtampa matuojama ir dėl detalių deformacijos suvirinimo siūlė yra automatiškai perstumiama. * Funkcija veikia tik kampinėms siūlėms Įskaitant Lorch S5 SpeedPulse XT suvirinimo aparatą Įskaitant automatinę degiklio valymo stotį *Nupjovimo įtaisas Ncsdpfxewgn Dwe Af Iel *Freza *Suvirinimo atskyrimo purškalas

Sąlyga: naujas, Gamybos metai: 2025, Max Ø 114 mm; Straight and bent round tubes; One grinding station; Ncjdpfxst Eaw Do Af Isl Grinding of straight and bent round tubes up to Ø114 mm with maximum flexibility. The ML100 tube grinding machine is the ideal choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube, delivering optimal results. The feed system safely guides the straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 - 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3-22 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Total power (kW): 4.5 Current consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250

Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 12-week delivery time ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure both price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEARS WARRANTY ☀️ ✅The Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It offers the ability to process up to 8 different chemicals with tanks configured according to process requirements. All tanks are made from 316 stainless steel and are insulated. The number of tanks and the number of heated tanks are determined based on process steps. ✅Tank heating is via gas heat exchangers. Processes can be monitored, and times and temperatures for all steps can be set via the PLC touchscreen. ✅Any system errors can be observed at the control panel. The tanks are equipped with automatic floats; the system stops automatically if there is insufficient water or chemicals in the tanks, and the fluid is automatically transferred between tanks as needed to keep the system safe. ✅There is a drip pan underneath all tanks, made from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. All materials undergo penetration testing and are argon-welded and hermetically sealed. Grids in the tanks prevent debris from reaching the pumps. The inside of the cabin is made of 304 stainless steel sandwich panels, while the exterior is powder-coated sheet metal. ✅The panel thickness is 80 mm. Panels are stainless steel filled with polyurethane. PPT ring pipes and nozzles ensure long service life. Ncedpfx Ajfggcwef Ijl ✅Thanks to the steam extraction fan, steam from the system is prevented from entering the workspace. The washer cabin doors are container-style and sealed with silicone gaskets. The movable washing platform inside the cabin moves back and forth to clean the materials. Hoses are supported by a mobile carrier system. Each process has its own pumps and a waste pump for emptying tank fluids. The discharge pump connects to the chemical discharge tank. ✅Manual application guns are provided for each process for manual use. The system offers a manual pre-treatment mode. Both drip time and process duration can be set via the PLC control panel; drip time is applicable for manual operation.

Sąlyga: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Njdpfx Ajpq If Dsf Ijcl Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Blast container for blasting with glass beads, ceramics, corundum, chilled iron grit, garnet sand, etc. Blast container equipped with a fully covered screw conveyor floor and genuine abrasive recycling system. Nsdpfsuwlzyox Af Ijcl No sweeping, vacuuming, or shoveling of abrasive in the blasting chamber during the blasting process due to our closed-loop system. Abrasive cleaner: air separator with 4-way adjustable settings for air volume, flow speed, extraction proximity to the abrasive, and abrasive bed thickness. Electric vibrating screen for continuous removal of coarse contaminants. Bucket elevator with trapezoidal-thread spindle for belt tensioning and speed monitoring. Container lining made from 70 Shore, 4mm fabric-reinforced rubber for a service life of up to 30 years with proper use. Container can be fully opened on the side for easy forklift loading. Container can be upgraded with a crane roof hatch, floor reinforcement, or lateral blasting chamber extension. For stainless steel blasting, the container can be upgraded with a genuine magnetic drawer or a drum-type magnetic separator as well as stainless steel grating. Filter unit with service doors for easy maintenance, big bag dust collection, secondary H13/14 filter, and silencer. Blast vessel with pressure regulator and water separator. The container stands out for its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special 5-year warranty included on all key components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, viewing window in the blasting chamber, emergency stop inside the blast chamber and externally on the control cabinet, quick pressure relief for the blast vessel.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 100 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 530 mm, bendras aukštis: 1 940 mm, bendras svoris: 1 200 kg, įėjimo įtampa: 400 V, ruošinio aukštis (maks.): 50 mm, galia: 6 kW (8,16 AG), įėjimo srovė: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100mm working width. The DM1100 C performs edge rounding and removes sharp edges on both outer and inner contours of stainless steel, steel, or aluminum parts that have been cut by laser, shear, or punch machines. This machine processes parts of various sizes, including products starting from 50x50mm. The DM1100 C is equipped with a station featuring double cross belts for edge rounding, producing clean, smooth, and burr-free edges across the entire part. DM1100 C Working capacity (mm): 1100x50 Number of cross belt stations: 1 Cross belt speed (m/s): 2-8 Ncsdpfxjtzfnte Af Iol Feed speed (m/s): 0.6-3.2 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Exhaust connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200