Pramoninis robotas

KUKA KRC2 KR 210 2000 2004 MODEL

Sąlyga: geras (naudotas), Gamybos metai: 1977, Pressure: 250 t Hsdjx Ug Dspfx Abmjfr Distance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. upper stroke, max. upper adjustment: 500 mm Table surface: 1100 x 900 mm Table height above floor: 950 mm Lateral pass-through between uprights: 700 mm Ram surface: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirements (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: with electrohydraulic drive, hydraulic (20) and electric control system as per UVV, light barrier (Sick), upper and lower stroke limitation, pressure- and position-dependent control, cutting stroke damping, short-stroke control, new control system (Mitsubishi), safety control (PNOZ Multi), screen control with touchscreen, control cabinet

Gamybos metai: 1990, Sąlyga: nepatikrintas (naudotas), Press force: 125 tonnes (2x63) Hfodjgy Hzpopfx Abmor Infinitely variable working speed: 0-10 mm/sec Return speed: 20 mm/sec Clearance between columns: 950x550 mm Table area (front access): 950x820 mm Table area (lateral access): 1220x550 mm Ram area: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5500 kg Height: 2900 mm Drive power: 18.5 kW 2 pressure cylinders with precision parallelism control Infinitely adjustable electronic stroke limiter

Sąlyga: naudotas, Walther Trowal Circular Trough Vibratory Finishing Machine, Model CLS-230 Ref. No. 05.833/00 Year of manufacture: 1969 Trough diameter: 1100 mm Overall trough height: approx. 650 mm Process container / gross volume: max. 230 liters Hedpofqpxisfx Abmofr Usable volume: approx. 115 liters Speed: 1100 to 1800 rpm, infinitely variable Motor power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator drive - Manually adjustable eccentric balance weights - Trough with polyurethane lining (lining partially damaged/worn) - Sound-insulated lid - Manual separation flap - Built-in screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1800 x 1750 x 1700 mm Net weight: approx. 1800 kg Good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and circulated extremely gently. The continuous relative movement between the workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1276, CNC Warm-Radialschmiedemaschine GFM SX-13 Baujahr: 1974 / (Modernisierung 2022) Neue Steuerung: PLC SIEMENS S7 Maschinennummer: 1276 Anzahl der Hämmer: 4 Schmiedekraft je Hammer: 160 Tonnen Hammerschläge / min: 700/min Hammerlänge: 240 mm Einstellbereich Durchmesser: 80 mm Maximaler Schmiededurchmesser: Hjdpfx Absq U R T Nemjfr Baustahl, Rundquerschnitt: Ø 130 mm Quadratquerschnitt: Ø 115 mm Kleinster schmiedbarer Durchmesser: Ø 25 mm Manipulator A max. Verfahrweg: 6.820 mm Manipulator B max. Verfahrweg: 7.150 mm Maximale Werkstücklänge: 6.000 mm Schnellgeschwindigkeit Manipulator: 400 mm/sec Gesamtanschlusswert: 300 kW, 380 V, 50 Hz Maschinenabmessungen: Schmiedehöhe über Boden: 615 mm Gesamthöhe der Maschine über Boden: 1.665 mm Gesamtlänge der Maschine: 32.670 mm Gesamtlänge des Fundaments: 33.400 mm Gesamtbreite der Maschine (ohne Zusatzausrüstung): ca. 3.885 mm Gesamtbreite des Fundaments: 16.000 mm Gesamtgewicht der Maschine: 84.000 kg

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring Hodsg Ezarjpfx Abmsfr - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Gamybos metai: 1980, Sąlyga: geras (naudotas), A used, very well-preserved cycle-controlled lathe from Weisser Heilbronn with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Cross travel X-axis: 350 mm Longitudinal travel Z-axis: 1850 mm Spindle nose DIN 55022 Size 8 Number of spindle speeds: 18 (14 – 1400 rpm) Spindle bore: 71.5 mm Diameter of front bearing: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW 400V 50Hz Max. permissible spindle torque: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MT 5 Dimensions (L x W x H): Machine weight: 5500 kg Hfsdpfx Aegyy I Aobmer Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the centre, size "C" 4-position turret behind the centre Tool holders Coolant system Follow rest, pneumatically operated Technical data and specifications are subject to change without notice. Video conference via WhatsApp available by appointment.

Sąlyga: naudotas, Gamybos metai: 2001, Deckel Maho DMC 60U Hi-dyn apdirbimo centras Būklė: naudotas Metai: 2001 Įjungimo valandos: 56 376 Veleno valandos: 26 451 Techniniai duomenys: X/Y/Z eiga: 600 / 600 / 700 mm Variklio galia: 15 kW (40 % ED); 10 kW (100 % ED) Sukimosi greitis: 18 000 aps./min. Įrankio tvirtinimas: SK 40 SK 40 žurnalų vietų: 60 Įranga: - 3D takelio valdymas MillPlus IT - Horizontalus dvigubo griebtuvo įrankių keitiklis - Automatinė pasukama frezavimo galva - Sukantis apsauginis langelis - NC apvalus stalas su padėklų laikikliu - Susukamų padėklų keitiklis - 2 padėklai 630 x 500 mm - Universalioji frezavimo galva su valdomu B ašimi SK 40 (tik kartu su SK 40 variklio velenu) - Įrankių tvirtinimas HSK-A63 pagal DIN 69893 - Elektroninis rankenėlis - 4 darbo režimas, išplėstas rankinis įsikišimas - Purškiamas pistoletas su siurbliu - Įrankių lūžimo kontrolė SK 40, mechaninė, diapazonas: 63...310 mm / ± 3 mm - Drožlių transporterio intervalinis jungiklis - Vidinis aušinimo skysčio tiekimas perjungiamas nuo 40 bar iki 80 bar Hodju Rnluspfx Abmsfr

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2008, Parker Hannifin Instron Hjdpfx Absq Nyw Aomofr Hydraulic Power Unit Year of manufacture: 2008 Power: 90 kW Main fuse: 200 A Operating pressure: 285 bar Flow rate: 165 L/min Tank capacity: 850 L This offer is exclusively addressed to commercial customers as defined by § 14 BGB. No sale to private individuals!

Sąlyga: beveik kaip naujas (naudotas), 2-Säulen-Hydraulikpresse Presskraft: 200 t Hfsdjghl N Uepfx Abmsr Hub oben: 500 mm Hub unten: 200 mm Gesamtmaße: 1800x2200x3700 mm Leistung: 10 PS Gewicht: 8,4 t

Gamybos metai: 1993, Sąlyga: naudotas, TYPE: DEA 400/2000 Year: n.d. Ram Capacity: 400 tons Slide Stroke: 1,100 mm Hodpfx Asihf R Uobmefr Max Shut Height: 1,600 mm Table Size: 2,000 x 1,600 mm Fast Stroke Speed: 650 mm/sec Cushion Capacity: 160 tons Cushion Stroke: 400 mm Overall Height (floor to top): 5,800 mm Distance Between Uprights (Front Opening): 3,400 mm Lateral Window Opening: 1,600 mm