Pramoniniai robotai

KUKA KR 90 R3100 extra F

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, bendras svoris: 1 103 kg, ašių skaičius: 6, Šis 6 ašių KUKA KR 90 R3100 extra C-F-HP buvo pagamintas 2016 m., jo keliamoji galia - 90 kg, pasiekiamumas - 3100 mm. Jame įdiegtas KRC 4 valdiklis, padidinantis jo darbo lankstumą. Apsvarstykite galimybę įsigyti šią roboto ranką KUKA KR 90 R3100 extra C-F-HP. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Papildoma įranga • 2 vienetai laisvų Mašinos privalumai Techninės mašinos privalumai • Diapazonas: 3100 mm Papildoma informacija Nsdpfx Acsyaiiaopocr Mašina vis dar įjungta

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: paruoštas naudoti (naudotas), Number of axes: 6, Rated payload: 90 kg, Control system: Engel, Weight: 1.13 t. Nodpek N Dnhofx Acpjcr

Būklė: naudotas, Gamybos metai: 2014, Pramoninis robotas Gamintojas: Kuka Tipas: KR210 R3100 ultra su 4,5 m linijine ašimi Pagaminimo metai: 2014 Veikimo diapazonas: 3.196 mm Svoris: 1.154 kg Keliamoji galia: 210 kg Kuka valdymas KRC4 Pagaminimo metai: 2014 Svoris: 163 kg Programinė įranga KSS 8.5.4 Kuka TouchPad KCP4 Kuka jungiamieji laidai Kuka linijinė ašis Tipas: KL1500-3 T Ncjdpfx Aexuwlwjcpor Pagaminimo metai: 2013 Ilgis apie 4,5 m Judėjimo eiga apie 3,5 m Kabelio grandinė KRC4 Svoris: 2.200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2600-109101 / Schaltschrank: 6700-101707, bendras svoris: 550 kg, keliamoji galia: 12 kg, valdiklių gamintojas: ABB, valdiklio modelis: IRC5 M2004, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of manufacture: 09.2017. Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Control cabinet: ABB IRC5 M2004. Year of manufacture: 11.2014 Used, complete, in very good condition, tested and ready for demonstration. (For more details, see the type plates.) We also offer accessories such as bases, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot upon request. Ncedpfxoucx Hdo Acpsr Packaging and loading included.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard Ncsdpfxsuggb De Acpor  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: naudotas, Gamybos metai: 2010, veikimo valandos: 14 037 h, mašinos/transporto priemonės numeris: 919486, Offered is a KUKA KR150 R3100C KRC2 with ED05 controller. Ncodpfxjimbtxe Acpsr We also offer a complete overhaul.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder Ncodpfjud H Dmsx Acper - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, keliamoji galia: 5 kg, rankos pasiekiamumas: 704 mm, Fanuc LR Mate 200 iC Robot (E-29388) with Cell Vision System Ncjdpfx Acsqgck Djpsr Country of origin: Japan Year: 2007 Control system: R-30iA MATE Number of axes: 6 Payload capacity: 5 kg Reach: 704 mm Repeatability: ±0.02 mm Robot weight: 27 kg Camera: Sony XC-56