Trumpą laiką šildymo sistema

Kreuzmayr 6000 Liter

Būklė: geras (naudotas), Comprising: - 3 tanks of 18,000 litres - 3 tanks of 15,300 litres - With walkway system - Material: AISI 316 - Square discharge door (bottom) - Motorised pomace discharge Ibedoib H Ddjpfx Acqsb - Round manway DN 400 (cylindrical section) - Residual drain, ball valve Ø 40 Friedrich No. 2 - Clear drain, ball valve Ø 40 Friedrich No. 2 - Sampling device - Recirculation line with ball valve Ø 40 Friedrich No. 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with integrated strainer cylinder insert (for wetting the pomace cake) Dimensions: - 3 tanks, 18,000 litres: Ø 2000 mm, height 5600 mm - 3 tanks, 15,300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Parts Washing Machine / Spray Cleaning System Type TR450 Ibodpefbt Sisfx Acqob The Spray-Rotation Cleaning System Type TR450 is an automatic cleaning and degreasing unit featuring an easy-to-open upward swinging lid. This system is designed for cleaning individual parts and/or bulk material in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on allowing slight circulation of bulk material inside the basket, which requires attention to the fill level in the basket. The system is additionally equipped with a flooding tray beneath the goods basket, enabling flood scooping of the parts for an even more effective cleaning outcome. Equipment includes: • Complete inside and outside stainless steel construction (grade 1.4301) • Level monitoring and automatic freshwater refill • Full system insulation • Hot air drying (output: 11.6 kW) • Steam fume extraction • Oil skimmer for bath maintenance • Automatic freshwater refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable clamping lid Power supply requirement: approx. 20 kW (32 amp plug)

Gamybos metai: 2022, būklė: paruoštas naudoti (naudotas), An unused and still originally packaged continuous pasteurizer from Pietribiasi Michelangelo Srl is available. Milk throughput: 1,500 l/h; cream throughput with up to 40% fat: 750 l/h. Inlet temperature: 6°C; pasteurization at 68/74/88°C; outlet temperature: 6°C. Balance tank/pre-run tank capacity: 100 l. Equipped with centrifugal pump for both product and cleaning, additional compartment and hot water unit. Plate heat exchanger features robust industrial construction in AISI 304 stainless steel, special Sondex (Denmark) heat exchanger plates in AISI 316 stainless steel, plate surface area 0.08 m², flow volume per plate: 0.21 dm³. Special snap-on Nitrile gaskets, glue-free. Hydraulic test pressure: 8.0 bar, test temperature: 110°C. Heat recovery: 85%. Temperature profile: 6–68/74/88–6/33/45°C across 4 sections. Final heating for cheese/yogurt output: 33/45°C. Media: approx. 3,000+3,000 l/h hot water at 92°C, approx. 3,000 l/h cooling water at 2°C. Holding time: 15 s. Construction: stainless steel AISI 304. Switching system for product to balance tank via pneumatic change-over valve when the heating temperature falls approx. 2°C below setpoint. 2x hot water generators for pasteurization and final heating, closed circuit. Module for automatic water supply and fully automatic hot water feeder, expansion vessel, pump, brazed plate heat exchanger. Documentation available. On-site inspection possible. Ibodpfxeyln D Ts Acqob

Gamybos metai: 2020, būklė: naujas, 1000 l/h Stainless steel frame on 4 adjustable feet Minimum/maximum level sensor in the pressure tank Stainless steel pressure tank The product is injected into the tank via a multi-nozzle head; Product pump: Check valve at the product inlet Sight glass at the product inlet CO2 pressure control valve for mounting on the CO2 cylinder Sight glass in the pressure tank Max. pressure: 6 bar Ibedpfx Aecx Smbjcqeb incl. electronic control system incl. booster pump

Gamybos metai: 2019, būklė: beveik kaip naujas (naudotas), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - As new: barely used - Documentation available (both electronic and hard copy) - Pallet with spare parts included TECHNICAL DATA Model: RWO 360/400-1150 Maximum furnace temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K in the range from 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace workspace: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean, dry furnace): < 5 x 10-5 mbar Footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not accept any liability for the accuracy, completeness, or up-to-dateness of the information provided. Ibsdpsiryyaofx Acqeb

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 Ibedpfx Acow U N Ixoqob - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, stalo ilgis: 8 000 mm, stalo plotis: 2 540 mm, bendras svoris: 8 000 kg, plieno lakšto storis (maks.): 100 mm, pjovimo ilgis (maks.): 8 000 mm, pjovimo plotis (maks.): 2 540 mm, gręžimo skersmuo: 40 mm, FICEP TIPO G25LG – CNC PLOKŠČIŲ APDIRBIMO ĮRENGINYS (GRĘŽIMAS, FRESAVIMAS, TERMINIS PJOVIMAS) | PAGAMINIMO METAI 2019 „Ficep Tipo G25LG“ yra CNC plokščių apdirbimo įrenginys, skirtas kombinuotam gręžimui, frezavimui, sriegių pjovimui ir plieno plokščių terminio pjovimo darbams metalo konstrukcijų gamyboje. Pagaminimo metai – 2019 m. – tai modernus įrenginys, skirtas naudoto įrangos rinkai. Visi procesai vykdomi viename etape ant tvirto dviejų tilto portalinio rėmo. BŪKLĖ IR REMONTAS Atliktas remontas ir patikrintas sertifikuoto techniko. Įrenginys yra paruoštas eksploatacijai. - Tikslus remonto apimtis priklauso nuo įrenginio ir bus atskirai aptartas, jei susidomėsite. - Apžiūra galima iš anksto susitarus (įrenginys paruoštas – demonstracija neatliekama įjungus). FUNKCIJA IR PASKIRTIS Vertikalus monobloko gręžimo įrenginys su automatiniu įrankių keitikliu (ISO 40) atlieka gręžimo, frezavimo, sriegių pjovimo, priskyrų įrengimo ir įleidimo darbus. „Hypertherm-XPR300“ plazminis degiklis ir integruotas dujinio pjovimo įrenginys atlieka terminį pjovimą – nuo plonų lakštų iki storių plokščių. Įrenginiu valdoma per „Ficep-Pegaso“ CNC sistemą. Įėjimo ir išėjimo ritininiai takeliai su medžiagos padavimu (po 8 m) užtikrina nuolydų medžiagos tiekimą. Tipinės panaudojimo sritys: metalo konstrukcijų gamyba, plieno prekyba ir įrenginių gamyba. TECHNINIAI DUOMENYS - Gamintojas: Ficep | Modelis: Tipo G25LG | Pagaminimo metai: 2019 | Serijos numeris: 36098 - Įrangos tipas: CNC plokščių apdirbimo įrenginys (gręžimas / frezavimas / terminis pjovimas) - Būklė: naudota, atliktas remontas sertifikuoto techniko - Rėmo konstrukcija: dviejų tilto portalinis rėmas, suvirintas | Įrangos svoris: 8 000 kg - Plokštės plotis: maks. apie 2 540 mm, min. 200 mm - Lakšto storis: maks. 45 mm (plazminis pjovimas), maks. 100 mm (gręžimas) - Gręžimo galvutės: 1 (vertikalus monobloko gręžimo įrenginys) | Įrankių laikiklis: ISO 40 - Maks. gręžimo skersmuo: 40 mm | Maks. gręžimo / frezavimo gylis: 100 mm - Maks. verpstės greitis: 7 000 aps./min. | Verpstės galia: 15 kW - Plazminis pjovimo degiklis (tiesus): 1 | Plazmos šaltinis: Hypertherm XPR300 | 300 A - Dujinio pjovimo įrenginys: yra - CNC valdymas: Ficep Pegaso CNC Ibjdpfx Aceu Dw I Esqeb - Procesai: gręžimas, frezavimas (įskaitant tiesius / kreivus įpjovas, Y / J formos siūlių apdirbimą), sriegių pjovimas, priskyrų įrengimas, įleidimas, žymėjimas, brėžimas, tiesus plazminis pjovimas, dujinis pjovimas Pasiteiravus (apžiūros metu bus patvirtinta): apdirbimo ilgis, įrankių vietos žurnale, min. lakšto storis gręžimui, min. gręžimo skersmuo, išmatavimai, atstumas (Pass Line), išilginis judėjimas ir skersinis pozicionavimo greitis, prijungimo galia ir įrangos matmenys. KOMPLEKTACIJA - 1 x „Ficep Tipo G25LG“ CNC gręžimo, frezavimo ir terminio pjovimo įrenginys (pagaminimo metai 2019) - 1 x „Ficep Pegaso“ CNC valdymas - 1 x vertikalus monobloko gręžimo įrenginys su automatiniu įrankių keitikliu (ISO 40) - 1 x plazminis pjovimo degiklis (tiesus) | 1 x „Hypertherm XPR300“ plazmos šaltinis (300 A) - 1 x dujinio pjovimo įrenginys - 1 x įėjimo ritininis takelis su medžiagos padavimu (8 m) | 1 x išėjimo ritininis takelis (8 m) - 1 x dūmų surinkimo sistema plazminiui pjovimui LOGISTIKA IR VIETA Vieta: Ulft (Nyderlandai), netoli Vokietijos sienos. Demontavimas, transportavimas, surinkimas ir paleidimas gali būti atliekami pagal susitarimą su ASM – atskiras pasiūlymas teikiamas pasiteiravus. APIE ASM „Arendsen Steel Machinery“ (ASM): specializuojasi atnaujintų „F

Būklė: naudotas, Gamybos metai: 1998, Automatic PET Bottle Blow Moulding Machine Manufacturer: SIDEL Model: SBO 16/16 S1 Year of manufacture: 1998 Output: 16,000 bph for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L bottle moulds Preform feeder Chiller unit Iodjutni Rjpfx Acqjbb Technical condition: used machine, fully operational until disassembly. The machine is currently dismantled, assembled in components, and prepared for transport. Complete and original technical documentation.

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), Pralaidumo našumas: 400 kepalų/val., įskaitant priedus ir atsargines dalis. Iodpfsh T A Trjx Acqjbb

Gamybos metai: 2025, būklė: naujas, Fruit belt press with a belt width of 1250 mm. Hourly capacity up to 10,000 kg, depending on fruit type and ripeness. Equipped with 27 rollers, featuring a full stainless-steel design with pre-juicing zone, main pressing roller profiled and closed, main pressing zone with 7 press rollers, high-pressure pressing zone with 6 press rollers, and 2 post-pressing rollers. Belt cleaning with rotary brushes and high-pressure water spray. Infinitely variable speed control. Removable dosing box, driven dosing roller, height-adjustable. Construction height: 2.7 m. Iodpfx Ajbpz D Aecqjbb