Konvejerio stalas, ritininis stalas

KRAUS STRB 80

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Nkodpfx Agowu Tu Deieu Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Gamybos metai: 2011, Sąlyga: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Nkedpfx Ageihpn Noiju Geared motor per conveyor: SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Sąlyga: naudotas, Gamybos metai: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery (flow rate): up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Chicago Pneumatic CPVR15 CE screw compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications—this compressor reliably supplies the compressed air you need. Njdpfxeh A Sfde Agijku Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigerant dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - oil-water separator Technical data taken from publicly available sources.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straighteners with cut-off units) are also available. Additionally, we have a wide range of individual spot welders for steel wire. Nkodpfxstvpils Agieu

Sąlyga: labai geros būklės (naudotas), Line for door frames (casings), for cutting, milling of strike plates, and inserting hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS" - 45° left-side cut – Drilling - 90° cut - 45° right-side cut – Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" model MULTITEC Nkedpfx Agoqwycloisu X10030F) Strike plate milling machine "MASTERWOOD" model Teknomat 3000

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Njdocqvhwjpfx Agioku Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: EWD DWK T-4, EWD pjūklų linija su spaneriu EWD ZE Microtec 3D matavimas EWD spaneris FZ5 EWD EVW ritininis mechanizmas Lanksti dviejų velenų diskinė pjūklinė Nksdpfx Agjx Rn Udoiju EWD DWK 700 T-4 4 lankstūs pjūklo ašys Pjovimo aukštis 60-340 mm 2x200 kW Pilnas valdymas Pilna hidraulika/skirstymo spintos

Sąlyga: geras (naudotas), WEBER pipe extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Nsdpfevryhyox Agieku

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, galia: 160 kW (217,54 AG), įėjimo įtampa: 380 V, garantijos trukmė: 12 mėnesiai, paskutinio kapitalinio remonto metai: 2023, Įranga: dokumentacija / vadovas, 1 Pellet mill, brand: Buhler DPAB - Inner die diameter: 660 mm - Die working width: 138 mm - Mill is equipped with 1 motor, 160 kW. - Press door is made of stainless steel and features an overload relief flap. - 2-roller pellet press, fully overhauled with 2 rollers in either dimpled or corrugated execution. - The pellet mill is complete with die lifting device and tooling. - The mill has been fully overhauled and fitted with new bearings and wear parts such as front and rear scrapers, die alignment ring, etc. Nodpfjrah Evsx Agioku - Fitted with new V-belts. - All safety measures will be complied with and appropriate switches installed, including friction guard, door switch, and inspection hatches.

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 13639, Heidenhain Steuerung Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 U/min Antriebsleistung – Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorn im Lager: 70 mm Erweiterter Werkzeugwechsler: 100 Plätze Rundschwenktisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbar C-Achse: 360° Nkodoinh Rqjpfx Agiou max. Tischbelastung ca. 1.000 kg max. Werkzeugdurchmesser: 80 mm max. Werkzeugdurchmesser bei freiem Nebenfach: 125 mm max. Werkzeuglänge: 300 mm max. Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X / Y / Z): 30 m/min Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Sonstige Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse