Išcentrinis ventiliatorius Išcentrinis orapūtė Orapūtė

KOJA 200kw 100.000m3/h

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over cross slide: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (flexibly equipped with stationary and driven tools) Turret indexing time: - 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Fpsdpfxox Hgl He Afdoh Travel paths: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Būklė: naudotas, Gamybos metai: 1998, Technical Details: Fjdpfx Aowwlt Rjfdoph Swing diameter: 830 mm Turning length: 4000 mm Swing diameter over bed slide: 540 mm Spindle bore: 130 mm Speed range: 2 - 1600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 - 2000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Space requirement approx.: 7 x 2.2 x 2 m with cycle control from R&D MTC-K MULTIFIX Tool Holder Size D Coolant device

Būklė: naudotas, Gamybos metai: 2002, Max. turning diameter: 300 mm Max. turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Max. swing diameter: 525 mm Distance spindle nose – turret facing surface: 115 – 690 mm Main spindle speed range: 35 – 4,000 rpm Main spindle drive power: 22 kW Max. torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Max. usable bar diameter: 64 mm Max. chuck diameter: 250 mm C-axis: 360° Fpsdpfx Asxmaguefdeh Number of tool stations: 12 positions Tool holder: VDI 40 Tool shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec Driven tool speed range: 25 – 4,500 rpm Driven tool drive power: 3.7 kW Max. torque (driven tools): 35 Nm Counter spindle speed range: 35 – 4,000 rpm Counter spindle drive power: 7.5 kW Max. torque (counter spindle): 57 Nm Max. chuck diameter (counter spindle): 150 mm X-axis: 190 (185 + 5) mm Z-axis: 575 (580 + 5) mm Counter spindle travel B: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed rate X/Z: 0 – 5,000 mm/min Feed rate C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirements: approx. 5.0 x 3.0 x 2.5 m CNC Turning and Milling Center MAZAK – Super Quick Turn 250 MS - Main and sub spindle - Driven tools - C-axis

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Stock machine "NEW" – available at short notice! (subject to prior sale) Control Unit: FANUC 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC storage LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel Ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear Guides & Speeds: Ball guides on X/Y axis Roller guides on Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate when milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine (CAM-Type) / Changer: Number of magazine positions: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent empty slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW 15,000 rpm direct drive spindle Spindle oil cooler Coolant, Chip, and Compressed Air Management: Fedpfjifn N Njx Afdjph Coolant system incl. 300-liter tank and pumps External coolant around the spindle Chip augers right and left in the machine bed Compressed air nozzle on the spindle (M32/M33) Compressed air through the spindle (M38/M39) Compressed air and coolant gun Other Features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger on control cabinet Auto power OFF function Hand tool set Signal beacon Transformer 400 VAC, 50 Hz CE Declaration of Conformity in accordance with European directives Electrical and Pneumatic Requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Special Equipment Included: Spindle: - Direct drive spindle SK-40, 15,000 rpm - Drive power (30min/continuous): 18.5 / 15 kW, (FANUC motor) Tool Magazines / Changers: - Drum magazine with 30 stations, DIN69871, SK-40 Rotary or Additional Axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, Chip, and Compressed Air Management: - Bed flush - CTS coolant pump with 20 bar pressure for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip trolley (chip discharge to front on left machine side) Measuring and Monitoring Systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in the machine, incl. mount - Auto door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown with RoboJob Mill Assist 25kg (year 2025 – NEW) - Full enclosure - Double gripper Available immediately

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Fpjdpfx Asdkdi Tefdeh

Būklė: naudotas, Gamybos metai: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm, vertical automatic feed with electro-magnetic fine-pole chuck, grinding wheel diameter: 300 x 50 x 76.2 mm, with paper band filter system, manual dresser mounted on top. Fpedpfx Afewq Nc Nodsh Various wheels and flanges included. Weight: approx. 2,400 kg Footprint approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please contact us for further information.

Būklė: beveik kaip naujas (parodų įrenginys), Demo unit with fewer than 20 operating hours // EXCELLENT CONDITION System: Optiv M 6.6.4 multisensor coordinate measuring machine with Dual Z technology Probes and Sensors: - 10x CNC motorized zoom with digital color camera and 12-segment LED ring light - HPsS-X1H scanning sensor with HH-A-T5 - HP-S-X1C/H stylus holder (1xM3) - M3 stylus kit for HP-S-X1C sensor - HR-X probe rack for HP-S-X1C/H (3 ports, L=400) - Sensor calibration unit without calibration artifacts - 25mm glass standard - 20mm ring gauge Computer and Software: - Measurement and evaluation software PC-DMIS CAD++ - Machine control unit BEST - Dell 27" monitor - Work table Optional Accessories: - Chromatic white light sensor (CWS) - CWS probe 3mm - Solara.MP12 Fsdpfoncfd Rex Afdeph - QS STAT 12 - O-QIS 12 Delivery, commissioning, and further services upon request Upon request, the measuring machine can be retrofitted to OptiCheck3D V 5.0

Gamybos metai: 2015, būklė: naujas, Shaft furnace Clear height: 1100 mm Clear diameter: 790 mm External diameter: 1560 mm External height (without lid): 1480 mm Fpodjcdi D Dspfx Afdjh External height (with lid): 2300 mm Electrically heated: 40 kW Recirculation fan: 2.2 kW Three-phase connection: 400 V, 50 Hz Temperature: max. 750°C

Būklė: naudotas, Gamybos metai: 2001, Technical specifications: X-axis travel: 2500 mm Fpedpfx Afsvptmwjdsh Y-axis travel: 1000 mm Z-axis travel: 750 mm Table area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speeds: 20 - 5000 rpm Feed rate: 1 - 30000 mm/min Rapid traverse: 30 m/min Total power requirement: 40 kW Space requirements approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with HEIDENHAIN TNC 426 CNC control 30-station automatic tool changer RENISHAW touch probe Coolant system with through-spindle coolant (IKZ) and chip conveyor Various tool holders

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 3 000 h, X ašies eiga: 6 100 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 950 mm, CNC-Fahrständer-Fräsmaschine – Komplett generalüberholt durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten mit modernster Heidenhain TNC 320 Steuerung komplett modernisiert. Sofort einsatzbereit für die Produktion. HAUPTTECHNISCHE DATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsschlittenweg): 950 mm • Doppelfräs-Kopf | Kopfrotation: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spann-/Lösefunktion) • Kopfmaße: 290 × 290 mm • Spindelmotorleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 WARUM BEI REM KAUFEN? ✔ Maschine vollständig geprüft und im Arbeitsbetrieb getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Wettbewerbsfähige Versandkonditionen Fsdpfx Aen D N H Tsfdsph Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie- und Schwerindustrie. Kontaktieren Sie uns für vollständige technische Daten, Fotos und Videodemonstration.