Rotoriaus ašmenų vidinis diržinis šlifuoklis

KMU RFSM 2000

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Fpodpfod N H A Nox Abmjr Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Techniniai duomenys: Talpa: 4000 x 7 mm Minimalus skersmuo: 550 mm Maksimalus skersmuo: 4000 mm Maksimalus plieno lakšto storis: 7 mm Maksimalus nerūdijančio plieno lakšto storis: 4 mm Maksimalus krašto spindulys: 300 mm Minimalus krašto spindulys: 20 mm Maksimalus dugno skersmuo: 4000 mm Minimalus dugno skersmuo: 300 mm Maksimalus bendras dugno aukštis (įskaitant tiesią sekciją): 640 mm Maksimalus torosferinio dugno skersmuo: 3000 mm Minimalus torosferinio dugno skersmuo: 300 mm Maksimalus pusiau elipsinio dugno skersmuo: 1950 mm Minimalus pusiau elipsinio dugno skersmuo: 300 mm CE ženklinimas Darbinis aukštis: 640 mm Variklio galia: 15 kW Fodjw Tq Siopfx Abmepr Svoris: apie 5,5 t Priedai: įvairūs įrankiai Būklė: Labai gera būklė, mažai naudota Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašina pagal išvaizdą, techniką ir nusidėvėjimą atitinka savo amžių; naudotos mašinos parduodamos be jokios garantijos.

Sąlyga: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm Fpedpeirax Uefx Abmjr - Weight: 1500 kg

Gamybos metai: 1960, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Fpodpjcblc Ssfx Abmor Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2004, AMADA MODEL HFT 8025: Hydraulische CNC-Abkantpresse mit einer Presskraft von 80 Tonnen und einer Biegelänge von 2.500 mm. Die Maschine verfügt über einen Hydraulikzylinder (Downstroking-Prinzip) und ist ausgestattet mit einer CD 2000 4-Achs CNC-Steuerung mit Farb-Grafikdisplay. Sicherheitsausstattung: Elektronische Schutzsysteme von ERWIN SICK an der Maschine sowie seitliche und rückseitige, verriegelte Schutzumzäunung. Fjdpfx Aeu A Dgrsbmopr Technische Daten: - Modell: Amada HFT 8025 Downstroking CNC-Abkantpresse - Baujahr: 2004 - Presskraft: 100 kN - Steuerungstyp: CD 2000 CNC - Gesteuerte Achsen: Y1, Y2, X, R - Max. Biegelänge: 2.500 mm - Öffnungshöhe: 470 mm - Hub: 350 mm - Eilgang: 100 mm/s - Biegegeschwindigkeit: 1–10 mm/s - Rücklaufgeschwindigkeit: 1–100 mm/s - Motorleistung: 7,5 kW - Maschinengewicht: 6.100 kg - Tischlänge: 2.500 mm - Tischbreite: 60 mm - Ausladung: 420 mm - CNC-Steuerung: ja - Hinteranschlag Verfahrweg (X-Achse): 700 mm/s - Maximaler Hinteranschlag: 1.000 mm - R-Achse: 250 mm Die Maschine kann unter Strom vorgeführt werden. Prospekt und weitere Informationen auf Anfrage erhältlich.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Fodpfopugwiex Abmspr Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW 400V/50Hz Weight: 110 kg Fpodpfx Abspgmufsmer Technical data and dimensions: subject to change/errors excepted

Gamybos metai: 1990, Sąlyga: naudotas, mašinos/transporto priemonės numeris: xxxx; Lg-Nr. 17250, Technical data: - Load capacity approx. 200 kg - Outreach 800 mm - Working height in horizontal position approx. 1000 mm - Jib arm motorized, rotatable left and right - Jib arm manually tiltable - Faceplate motorized, rotatable left and right - Faceplate speed infinitely variable - Faceplate diameter 300 mm - Swiveling control panel with ESAB controls, - Type 6 PTF, year of manufacture 1997 Fpodpedd Ilxsfx Abmsr - Space requirements approx. W 1100 x H 1300 x D 1600 mm - Weight approx. 300 kg

Gamybos metai: 2015, Sąlyga: naudotas, Rotator for containers, welding table, welding positioner, roller stand 1000 kg load capacity With foot remote control Continuously variable speed adjustment from 80 to 1600 mm/min Fsdpfec Ny H Asx Abmopr For diameters from 20 mm to 700 mm

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Löser centerless tube grinding machine - belt grinding machine - centerless tube polishing machine - cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and was completely overhauled in 2012. During the overhaul, it was converted for polishing and has since only polished approx. 10,000 parts. After that, the machine was no longer in use. During the general overhaul, the motors, bearings, and the entire electrical cabinet with frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. A wastewater treatment system including pumps is currently not available. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Fpodpetmqi Dsfx Abmsr The machine is suitable for tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power output of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.