Matavimo mašina

Klingelnberg - Oerlikon BC10

Būklė: naudotas, Gamybos metai: 2006, Įtampa: 110–230 V Dažnių diapazonas: 50–60 Hz Prisijungimo galia: 0,5 kVA Matmenys (A x P x G): 1000 x 800 x 1750 mm Svoris: 150 kg Matavimo mašina lazdeliniams peiliams. Įranga/priedai: - Matavimo įrankiai - Tvirtinimo priemonės - Kompiuteris Lrjdpfxsyhq T Aj Acpok - Monitorius - Spausdintuvas - Kabina - Techninė dokumentacija

Būklė: geras (naudotas), Gamybos metai: 2007, Maximum wheel diameter: 500 mm Wheel width: 200-400 mm Module: 12 Speed: 0-3250 rpm Braking torque: up to 95 Nm Internal taper: Taper #39 Control system: Fanuc 16 Total power requirement: 15 kW Lrsdpfxovr Hf Es Acpjk Machine weight: approx. 6 t Space requirement: approx. 2,350 x 2,240 x 2,500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED, AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC inspection machine with three linear axes for fully automatic hard and soft testing of spiral bevel and hypoid gear sets with 90° shaft angle. It offers a wide range of objective and subjective testing options with speeds up to 3,250 rpm and braking torques up to 95 Nm.

Būklė: geras (naudotas), Gamybos metai: 2002, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Lredpfsw N S E Aox Acpsk Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Būklė: naudotas, Gamybos metai: 2001, Wheel diameter - max. 400/500 mm Ledpfx Aovxwxcecpsrk CNC control GE FANUC Series 160i-M Pinion diameter - max. 400 mm Crown wheel diameter max. 500 mm X-axis +/- 70 mm y-axis 200 mm z-axis 200 mm Axis angle 90 degrees Speed range: R T min Rated current 30 kVA Machine weight approx. 6.2 t Space requirement approx. 3.2 x 2.5 x 2.3 m

Gamybos metai: 2002, būklė: naudotas, z-axis travel 200 mm Maximum clamping diameter of cutter heads: 550 mm Max. permissible cutter head weight: 150 kg Mounting plate diameter for cutter heads: 360 mm Mounting taper nominal diameter for cutter heads: 500 mm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m Cutter Head Setting and Measuring Machine In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used plays a decisive role. Especially in dry milling, high gearing quality and long tool life can only be achieved with precisely adjusted cutter heads. The CS 200 cutter head setting and measuring device enables fast and simple adjustment of individual cutters, checks their position, and documents the measurement results. The measuring sequence on the CNC-controlled inspection device is semi-automated: the individual actions required for each step are shown on the display and guided by operator prompts. Positioning of the individual cutters in the cutter head, including the height of the cutter tips, is carried out largely automatically via a special procedure and simultaneously recorded via a run-out diagram. A follow-up measuring process checks the radial position of all internal and external cutting edges in the cutter head. If certain parameters do not meet the specified tolerances, they can be individually readjusted. Thanks to the combination of semi-automated adjustment sequence, operator-guided setup actions, and automated measuring process, cutter heads can be set conveniently, quickly, and with high precision. Operator-guided setting and inspection sequence: Lrodpfx Acjy A S U Sepjk - Graphical representation of the cutter head design as well as measurement results with tolerance check - Operator instructions given in plain text (no coded references) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer - Setting and inspection sequence suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data