Profilių lenkimo staklės su hidrauliniu tiekimu

KK-Industries Profilbiegemaschine Sahinler HPK 180 DP (2 Speed)

Sąlyga: naujas, Gamybos metai: 2023, veleno skersmuo: 80 mm, Profile Bending Machine AHB 80 - Electro-hydraulic ring/profile bending machine - Hydraulic adjustment of the lower rolls - Hydraulic side roll adjustment - Individually adjustable lower shafts - Three driven rolls - Segmented roll sections - Digital display - Touchscreen operation - Hardened shafts and standard rolls Ndsdpfjqxcy Hjx Ac Ajd - Hydraulically adjustable side straighteners - Usable in both horizontal and vertical positions - Mobile control panel - CE marking / Declaration of conformity Shaft diameter 80 mm, hardened Fully hydraulic Motor: 400 Volt, 50 Hz, 3 phase Weight: approx. 1,700 kg Dimensions: 1340 x 1390 x 1640 mm

Sąlyga: naujas, Pressure 28 t Stroke 180 mm Table size 300 x 550 mm Piston diameter 130 mm Working speed min. 2 m/sec Working speed max. 9.8 m/sec Return speed 20 mm/sec Maximum pressure 200 bar Machine weight approx. 0.65 t Total power requirement 4 kW Space requirement approx. 1.15 x 0.75 x 1.1 m • The horizontal bending and straightening press from Profi Press is a versatile hydraulic press, specifically designed for bending, profiling and straightening applications. The machine’s possible uses depend on the accessories mounted on the work table, the tool holder, and in the bores and pin holes. • The HB-28 model is equipped for light bending operations on the work table with an angle scale, and the press can also be supplied with tools (such as block punches) for mounting on the tool holder, as well as tools for installation in the bores and pin holes to perform a variety of tasks. • The hydraulic system can be adjusted via pressure and flow control valves, which regulate the pressing force and speed of the press. The press is equipped with a built-in pressure gauge. Nedpfxogvkmrj Ac Asdd • The control panel is used to operate and display the piston stroke and to select between manual or automatic operation. The HB-28 model is also equipped with integrated memory for up to 4 different programs. • Operation is via electric foot pedals.

Sąlyga: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Table height: mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Operation in CCS version: After the material has been advanced and the vices have been closed, the cutting process is started. The lowering is performed by the saw’s own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch with provision for padlock, switch or speed changer, emergency stop, thermal-magnetic protection, 24V low-voltage system). Electronic band tension converter with display screen. Manual vice with quick-release locking. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for performing cuts of identical length. Machine designed for pallet truck transport. Nodpfx Ajfg E H Tsc Ajdd Bi-metal saw band for solid and profile material. Tool kit and operating manual.

Sąlyga: naujas, Gamybos metai: 2020, Elektrische Bogenbiegeanlage ist die Vorrichtung zur Herstellung von Rohrbogen aus runden und rechteckigen Rohren mit verschiedenen Durchmessern. Die Bogenbiegeanlage EEM-200plus ist die verbesserte Version der EEM-200. Sie verfügt über ein zusätzliches viertes unteres Presswerkzeug, sodass die Rohre beim Biegen von allen vier Seiten gepresst werden und eine bessere Bogenqualität erreicht wird. Unsere Maschine kann sowohl mit Rundrohren als auch mit Rechteckrohren betrieben werden. Die Bogenbiegeanlage EEM-200plus ermöglicht die Bearbeitung von Rohren mit Durchmessern von 80 bis 200 mm. Wichtiger Hinweis: Der Innendurchmesser des zu biegenden Rohrs muss 1 mm größer als die Biegematrize der Maschine sein! Das Rohrschloss muss verschlossen oder verschweißt sein, um ein Öffnen beim Biegen zu verhindern! Nsdpfx Aof Epznjc Ajdd Die Bogenbiegeanlage EEM-200 ist elektrisch betrieben und benötigt weder Druckluft noch Hydrauliköl. Der Stromverbrauch beträgt 1,5 kW/h. Die benötigte Betriebsspannung beträgt 380V. Einsatztemperatur: -5 bis +45°C. Die Bogenbiegeanlage eignet sich zum Biegen von Rohren mit einer maximalen Wandstärke von 0,8 mm. Die Bogenbiegeanlage EEM-200plus biegt Bögen mithilfe spezieller Presswerkzeuge. Für jeden zu biegenden Rohrdurchmesser wird ein eigenes Werkzeugset benötigt. Um weitere Durchmesser verarbeiten zu können, sind zusätzliche Presswerkzeuge erforderlich. Mit der Maschine werden vier Presswerkzeugsätze geliefert, sodass Sie Rohre mit vier ausgewählten Durchmessern im Bereich von 80 bis 200 mm biegen können (Durchmesser frei wählbar).

Sąlyga: naujas, Gamybos metai: 2024, Ring Bending Machine Zopf - incl. digital display - three driven rollers with smooth surface - manual adjustment of the upper roller - horizontal and vertical working positions - model ZB 30/3 MD - shafts supported by tapered roller bearings Nodpfx Acsdktnvs Ajdd - use of interchangeable sliding guides on the guide carriage - roller diameter: 76–86 mm - shaft diameter: 20 mm - roller speed: 11 rpm - drive motor: 0.18 kW - bending capacity (round tube): 30 mm - flat bar: 25x6 mm - angle iron: 20x20x4 mm - weight: 80 kg

Sąlyga: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. Ndjdpjng A R Sefx Ac Aod POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Sąlyga: paruoštas naudoti (naudotas), bendras aukštis: 3 020 mm, bendras ilgis: 3 300 mm, bendras plotis: 5 100 mm, gerklės gylis: 1 060 mm, sunki dviguba stulpelinė juostinė pjovimo staklė, skirta aukštų lydinių plieno rūšių pjovimui automatinis ruošinio padavimas su automatiniu persistatymu CNC valdomas kintamas padavimo ir pjovimo greitis skiedrų konvejeris įrengta visiškai varomomis Weisshaupt ritininėmis linijomis: - 10,3 metrų išorinė tiekimo ritininė linija su 2 hidrauliniais spaustuvais ruošinio kontūrams fiksuoti - 9 metrų vidinė tiekimo ritininė linija su 2 hidrauliniais spaustuvais ruošinio lygiavimui - Didžiausias ruošinio plotis: 900 mm Nodpfx Asv Sfp Aoc Ajdd - kiekvienas ritinys yra su varikliu - vienos ritininės linijos talpa – 4 tonos - 4 metrų išėjimo ritininė linija: viena ritininė linija su svarstyklėmis ruošiniui sverti po pjovimo (Sartorius sistema) Didžiausias ruošinio aukštis: 860 mm Pjovimo greitis: 16–80 m/min Juostinio pjūklo ilgis: 10260 x 80 x 1,60 mm Reikalinga galia: 32 kW (100 amp) Svoris: 9 tonos (tik staklės)

Sąlyga: geras (naudotas), Gamybos metai: 2017, The machine is as good as new. Ndjdpfx Aotddwusc Asd

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, - USADA - CURVADORA DE TUBOS EJES: 3 DIÁMETRO MÁXIMO DEL TUBO: 30 x 2 mm LONGITUD DE TRABAJO: 3.000 mm VELOCIDAD DE POSICIONAMIENTO EJE X: 900 mm/seg Ndedpfxevhc Uuj Ac Aed VELOCIDAD DE CURVADO EJE Y: 200°/seg VELOCIDAD DE GIRO EJE Z: 360°/seg RADIO MÁXIMO DE CURVADO: 20 A 170 mm UNIDAD DE CONTROL: DNC800

Sąlyga: naujas, Dimensions (LxWxH): 1,630 x 700 x 1,200 mm Approximate weight: 480 kg Total power requirement: 1.1 kW Pre-bending: 2 mm Sheet thickness: 3 mm Sheet length: 1,050 mm Technical Data Nodpsd Eqqqofx Ac Aodd Plate Rolling Machine Roller diameter: 90 mm Rolling speed: 6 m/min • Asymmetrical roller arrangement • 2 rollers driven by brake motor • Rear roller adjustment with handwheel • Upper roller can be swung out • Conical rolling device • Double foot switch for forward/reverse operation • Lower and rear rollers with wire grooves • Operating instructions in GERMAN EXTRA: Hardened rollers EUR 900,-- Catalogue available at the following link: