4 ritinių lakštų valcavimo mašinos su hidrauline pavara

KK-Industries CY4R-HHS 190-20/8.0

Sąlyga: naudotas, Arbeitslänge: 5.500 mm Lrodpj Dvliefx Aaajw Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Halter links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Ledpfx Aed Ab H Hjaasrw Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Gamybos metai: 2024, Sąlyga: naujas, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Ledpfxoftdh Ie Aaaorw Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at our showroom in Staufenberg by prior appointment at any time. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions Ledpfod Auacjx Aaaerw • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Ostas 3-Roller Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Special Equipment Included in the Price: - Motorized adjustment of lower rollers - Hardened rollers - Motorized adjustment of rear rollers - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending sheet thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor power: 4 kW Equipment: Ljdpeg Nz T Iefx Aaasrw - Electrically driven upper and lower rollers - Swing-out upper roller - Cone bending device - Asymmetrical roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable, CE mark

Sąlyga: geras (naudotas), Technical data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section/profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for tube and profile rolling The seller is not liable for typing or data transmission errors. The machine's condition (appearance, technology, and wear) is consistent with its age; used machines are sold without any warranty. Lrjdjwchn Ujpfx Aaajw

Sąlyga: beveik kaip naujas (naudotas), 2-Säulen-Hydraulikpresse Presskraft: 200 t Hub oben: 500 mm Hub unten: 200 mm Gesamtmaße: 1800x2200x3700 mm Leistung: 10 PS Lredpeghl N Usfx Aaajw Gewicht: 8,4 t

Sąlyga: naujas, Gamybos metai: 2025, - Capacity 700 x 2 mm Lrjdpeihv Hpjfx Aaasw - Conical rolling - Removable top roll - Foot control - Emergency stop - Documentation - 400V

Sąlyga: naujas, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10.6 t Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 13.0 mm » at 3x top roller diameter Pre-bending: 10.0 mm » at 1.5x top roller diameter Top roller diameter: 270 mm Lower roller diameter: 250 mm Side roller diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Conical bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of lower roller via torsion shaft • Pressure-adjustable lower roller • Electrical and hydraulic overload protection • Mobile control console • Machine and equipment comply with CE regulations See catalog at the following link: Lsdpfsd Ab H Iox Aaajrw       Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be max. 30% or more than 60% of the roller length • Hardened rollers are recommended

Sąlyga: naujas, Sheet length: 3100 mm Sheet thickness: 10.0 mm Pre-bending capacity: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 9.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Ljdjd Ab H Ejpfx Aaaerw Image similar Bending capacity: 10.0 mm » at 3x top roller diameter Pre-bending: 8.0 mm » at 1.5x top roller diameter Top roller diameter: 270 mm Lower roller diameter: 250 mm Side roller diameter: 220 mm Max. opening: 50 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic side roller adjustment, synchronized via PLC • Hydraulic lower roller adjustment via torsion bar • Pressure-adjustable lower roller • Electric and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the nominal capacity • Cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended