Hidraulinės giljotininės žirklės Swing cut

KK Kletzer Schwingschnitt-Tafelschere SWC 3200 x 10 mm & CNC

Būklė: naudotas, Gamybos metai: 2000, Grinding length: 800 mm Centre height: 150 mm CNC control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22-313 / 51-750 rpm Workpiece headstock swivel: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Required space (LxWxH): approx. 3.7 x 2.2 x 1.9 m Includes: Fedpfx Aheu Hag Newjfw - Coolant system - Enclosed steady rest - Diamond dresser - Open steady rest - 3 grinding wheels - 3 flanges - Internal grinding spindle attachments

Būklė: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools Ffedpswbil Sefx Ahwjw This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Gamybos metai: 2022, būklė: naujas, La macchina ZIM T1200 è in grado di produrre tubi con diametro da 300 mm a 1200 mm e altezza da 500 mm a 2500 mm mediante pressatura singola, doppia e tripla. Tubi da 150 mm e 200 mm possono essere realizzati su richiesta specifica. Le macchine possono essere progettate in versione semiautomatica o completamente automatica in base alle esigenze. Sulle macchine automatiche utilizziamo microprocessori PLC della marca SIEMENS. Ffodpfjibbikox Ahwsw Le macchine sono dotate di tramoggia per malta e sistemi di riempimento della malta. I materiali prodotti possono essere trasportati nell’area di essiccazione tramite carrelli da trasporto o carrelli elevatori. La produzione avviene su pallet di produzione. I materiali fino a 800 mm di diametro vengono trasportati nell’area di essiccazione tramite carrelli da trasporto, mentre i tubi con diametro superiore a 800 mm possono essere spostati con il carrello elevatore. Per una produzione rapida, anche i tubi con diametro superiore a 300 mm possono essere portati nell’area di essiccazione con il carrello elevatore. La macchina esegue la produzione tramite pressa idraulica e vibrazione. Il sistema di vibrazione della macchina è una progettazione speciale degli ingegneri ZIM ed è dotato di sistema di raffreddamento a olio con apposita unità dell’olio. Questo sistema può essere controllato elettronicamente. Lo speciale telaio rinforzato della macchina garantisce una produzione affidabile e duratura senza errori.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit that moves in the longitudinal (X-axis) direction, with an adjustment range of 0 - 15,000 mm. It is equipped with an automatic tool changer using an HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Fjdev Iamzepfx Ahwsfw Technical details: - Profiled and flat steel support with guide rail and fixed table, total length: 15 m - Mobile drill unit for longitudinal positioning on workpieces - Horizontal drill head with a single drilling spindle - Additional drill head storage in X-axis direction - Clamping system for securely fixing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drilling spindles: 1 - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Spindle speed: 180 - 3000 rpm - Holder: HSK A 80 - Tool changer: 1 x 6 For more information, please contact us.

Būklė: naujas, Gamybos metai: 2023, plieno lakšto storis (maks.): 10 mm, pjovimo ilgis (maks.): 3 050 mm, Technical Specifications Cutting Capacities: - Maximum Cutting Length: 3100 mm - Maximum Thickness for Mild Steel: 10 mm - Maximum Thickness for Stainless Steel: 6 mm Fjdpfxsrt Uv Es Ahwefw - Throat Depth: 50 mm - Adjustable Cutting Angle: 1.5 degrees - Number of Hold-downs: 16 - Hold-down Force: 22 tonnes - Adjustable Backgauge: up to 1000 mm - Backgauge Speed: 200 mm per second Drive and Dimensions: - Motor Power: 22 kW - Oil Tank Capacity: 200 litres - Support Arms: 2 pcs - Working Table Height: 865 mm - Working Table Width: 580 mm - Working Table Length: 3515 mm - Machine Dimensions (LxWxH): 4200 mm x 2250 mm x 2100 mm - Weight: 9300 kg - Total Width incl. support arm and safety guard: 3600 mm Features - Oscillating cutting action for precise results - Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length, and number of cuts, including USB port - Motorised backgauge on ball screws with a range up to 1000 mm, can be lifted for maximum flexibility - Clear control panel on the swivel arm for convenient operation - Hydraulic hold-downs positioned close to the cutting edge for optimised results - Foot pedal for easy operation - Centrally adjustable blade gap for various material thicknesses - Cutting line illumination for improved accuracy - Large support table with roller balls for material handling - Counter for cut pieces - Single and serial cut options - Folding finger guard and side stops for safe operation - Easily replaceable and resharpenable blades for long-lasting sharpness - Adjustable cutting length for efficient processing and minimal material waste - Low-maintenance design with easily accessible oil fill - Safety light barriers at the rear of the machine for increased workplace safety - Professional customer service - Operating manual in GERMAN and ENGLISH - Conforms to current CE safety regulations

Būklė: naudotas, Gamybos metai: 1999, bendras aukštis: 2 000 mm, bendras ilgis: 3 000 mm, bendras plotis: 1 800 mm, Svoris be krovinio: 4 000 kg Kaina: pagal užklausimą Fodpfewqf I Usx Ahwofw Varomi įrankiai įskaičiuoti. Strypų padavėjas įskaičiuotas. - Pagaminimo metai: 1999 - Yra dokumentacija: taip - Yra CE ženklinimas: taip - Yra CE sertifikatas: ne - Serijos numeris: HT23372E - Valdymas: CNC - Valdymo sistemos gamintojas: Yasnac - Galia [kW]: 15.0 - Centrų aukštis [mm]: 230 - Tekinimo skersmuo virš stalo [mm]: 450 - Centrų atstumas [mm]: 380 - Verpstės praėjimas [mm]: 59 - Min. verpstės greitis [aps/min]: 30 - Maks. verpstės greitis [aps/min]: 5 000 - Pasirinktys: strypų padavėjas, varomi įrankiai - Transportavimo matmenys: 3000 mm x 1800 mm x 2000 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 4 000 kg - Transporto paketų kiekis [vnt.]: 4 Finansinė informacija PVM: nurodyta kaina be PVM PVM/maržos apmokestinimas: PVM atskaitomas verslui Pristatymas ir mainai galimi bet kokiai pramoninei įrangai Lukas van Rossum

Būklė: naujas, Pressure: 600 T Bending length: 6,050 mm Frame gap: 5,100 mm Installation height: 680 mm Stroke length (max): 455 mm Throat depth: 450 mm Dimensions (LxWxH): 7,100 x 3,275 x 3,910 mm Approx. weight: 50,200 kg 4 axes (Y1, Y2, X, R): Yes, all axes operated via Esa S630 (2D graphical control) CNC crowning via control: yes, via Esa S630 (2D graphical control) Motor power: 45 kW Standard equipment: KK Kletzer Europa We have assembled a high-quality model for the European market. The CNC press brake KK-Industries made in Turkey. Model KK Kletzer EUROPA XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy, and versatile application possibilities. The Europa XL offers a very large installation height, resulting in a long stroke (cylinder travel). The throat depth is also above average to minimize any restrictions during operation. Our focus is on quality, which is reflected in the control system as well. As standard, we offer the high-grade Esa S640 (2D graphical control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all controlled by the system. Naturally, CNC crowning via Esa S640 (2D graphical control) is also included. Regarding the upper tool and die, we make no compromises and equip the KKI EUROPA XL CNC press brake with quality tooling from EUROSTAMP Italy. Of course, a machine is only as good as its after-sales service. For this reason, we focus on highly qualified personnel with many years of experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R axis Esa S640 (2D graphical control) Backgauge with dual linear guide and ballscrew drive Motorized crowning system with CNC control Heavy-duty adjustable stop with handwheel, from 175 t heavy-duty version with linear guide Laser safety device on upper beam CE safety equipment Various options available Other controls available: ESA 640 2D 15'' touchscreen control ..... ¤ 4,520.00 ESA 675 W 3D 21'' touchscreen control (Windows-based) ..... ¤ 6,485.00 DELEM 66 T 2D 17'' touchscreen control (Windows-based) ..... ¤ 10,165.00 DELEM 69 T 3D 17'' touchscreen control (Windows-based) ..... ¤ 16,350.00 KK-Industries GmbH Ffsdpfx Aod Ehh Rjhwsw There’s something for everyone!

Gamybos metai: 2005, būklė: geras (naudotas), mašinos/transporto priemonės numeris: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 Fodpfxsg Rn Ias Ahwjfw TECHNISCHE DATEN: Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten.

Būklė: naujas, Gamybos metai: 2025, Металлосайдинговая профилегибочная машина «двойная фасадная панель» SPM-2 Профилегибочная машина для производства металлосайдинга «двойная фасадная панель» SPM-2 — это новейшая разработка нашей компании для формовки фасадных и стеновых металлических панелей с необходимой конфигурацией. Данные двойные фасадные панели пользуются большой популярностью в строительстве для облицовки жилых зданий и промышленных сооружений, а также при возведении заборов различных конфигураций, беседок, кровельных элементов и пр. Линия по производству металлосайдинга SPM-2 полностью автоматизирована и состоит из формующего блока, системы автоматизации и гильотинных ножниц на выходе из машины. В зависимости от потребностей клиента, линия может быть укомплектована ручным или автоматическим размотчиком рулонов металла. В стандартной комплектации профилегибочная машина SPM-2 для изготовления «двойных фасадных панелей» формирует плоский профиль панели, однако при дополнительной комплектации возможно изготовление панелей с микроволновым или ребристым профилем. Для начала работы необходимо установить рулон металла на размотчик и завести край полосы в первые формующие ролики оборудования, протягивая металл пошагово через последующие ролики и при необходимости корректируя его положение. Когда металл достигнет отрезного устройства, его подают в режущие ножи и производят «нулевой» рез. После этого оборудование переводится в автоматический режим. На панели управления можно задавать количество задач и длину изделий, выполнять одиночные заказы или работать в многозадачном режиме. После задания необходимых параметров машина автоматически формирует металлические обшивочные панели и нарезает их на требуемые размеры. Это обеспечивает максимально оперативное получение готовой продукции с высоким качеством. Скорость профилирования регулируется и составляет 10–15 метров в минуту. Линия изготовления фасадных панелей SPM-2 комплектуется специальными пуансонами для пробивки монтажных отверстий по краю панели, что позволяет заказчику предлагать более интересные решения и расширять ассортимент продукции. Формующий блок машины оснащён 18 парами прокатных клетей, что обеспечивает высокое качество готовых изделий. По желанию заказчика машина может быть поставлена с защитным кожухом или без него. Ffedpfsxghngex Ahwow Технические характеристики: • Ширина материала (мм): 416 • Толщина материала (мм): 0,4–0,5 • Мощность двигателя (кВт): 3 + 1,1 • Скорость прокатки (м/мин): 10–15

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Ticab Printing System TPS ist eine innovative Ausleger-Druckanlage. Sie ermöglicht die Zuführung von großen Werkstücken unter den Druckkopf. Der Druckkopf kann bis zu 30 cm über dem Förderband eingestellt werden, um gefaltete Kartonschachteln oder andere große Produkte zu bedrucken. Die hochwertige Hewlett Packard HP Pigmenttinte bietet nach dem Trocknen des Druckbildes eine hohe Beständigkeit gegenüber Ausbleichen, Kratzern und Wasser. Kontaktieren Sie uns, um ein attraktives kommerzielles Angebot zu erhalten. Technische Daten: - Druckbereich Breite: bis zu 29,7 cm (11,7 Zoll) - Druckbereich Länge: von 2,54 cm (1 Zoll) bis 91,44 cm (36 Zoll) Fodpfx Ahju Ibhwjwjfw - Werkstück-Fördergeschwindigkeit: bis zu 45,72 cm (18 Zoll) pro Sekunde - Druckgeschwindigkeit: bis zu 50–70 Exemplare/Min. (A4), bis zu 16 Exemplare/Min. (A3) - Druckauflösung: 1200 x 1200 dpi - Anzahl der Düsen: 59.136 (14 Druckzonen mit jeweils 4.224 Düsen) - Farben: CMYK (Cyan, Magenta, Gelb, Schwarz) - Tintentyp: Wasserbasierte Pigmenttinte - Anschluss: Ethernet 10/100/1000 Base-T Netzwerkport - Betriebssystem: Windows (empfohlen: Windows 10) - Hewlett Packard HP Treiber - Von Profis in 55 Ländern weltweit genutzt!