Cilindrinės šlifavimo staklės

KELLENBERGER 1500U

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Internal Grinding Attachment Disassembly, cleaning of parts, replacement of worn and defective components, assembly of the mounting and alignment of geometry. Newly painted. Knedpfx Aoxt Ilfsbkof Hydraulics Disassembly, motor replacement, replacement of hoses and worn or defective parts. Hydraulic block checked. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, table grinding. Z Axis Disassembly, table grinding, replacement of worn and defective parts, hydraulic piston overhaul, scraping of V and flat guides. Newly painted. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor terminals and relay controls. New wiring. New frequency inverter for the workhead. TECHNICAL SPECIFICATIONS Distance between centers 1500 mm Distance between centers (headstock and overhanging tailstock) 1650 mm Center height, standard 125 mm Center height with raising blocks 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with raising blocks 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement per handwheel revolution – coarse 20.006 mm Manual table movement per handwheel revolution – fine 2.457 mm Continuous table speed, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Work Spindle Workpiece speeds, continuously variable 20–400 min-1 Swivel 360° Work spindle internal taper MT5 Tailstock Tailstock spindle internal taper MT3 Manual or hydraulic spindle retraction travel 30 mm Dressing diamond internal taper MT0 Universal Grinding Head Transverse wheel slide travel 285 mm Rapid traverse, wheel slide (forwards & backwards) 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 min-1 Vertical movement of grinding spindle, center height 125–330 mm Cylindrical grinding wheel, max 400x50x127 mm Surface grinding wheel, max 250x20x76 mm Swivel of grinding head with locking at 90° increments 270° Wheelfeed One division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 min-1 / 4.0 hp Workhead spindle motor 3,000 min-1 / 2.0 hp Coolant pump motor 2,850 min-1 / 0.12 hp Internal Grinding Device Bore 70 mm Int. grinding spindle speed Ø70 mm 14,000 min-1 Int. grinding spindle speed Ø50 mm 21,000 min-1 Unless otherwise stated, the technical data is provided without guarantee of accuracy or completeness.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 900 mm, matavimo diapazonas Y ašis: 1 200 mm, matavimo diapazonas Z ašis: 700 mm, Zeiss CNC Coordinate Measuring Machine Prismo VAST GOLD with rotary table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: C98 controller with BP26_SE control panel VAST GOLD probe head 13-position probe changer magazine Probe changer disc Probe accessories Calibration sphere Reference probe Knedpfsvdtzdox Abkef Workstation with monitor Calypso Basic 5.2 software Upgrade to the latest Calypso version and further options possible Complete retrofit with C99 and current Calypso possible Available at short notice

Sąlyga: visiškai atnaujintas (naudotas), Kellenberger vidinių ir išorinių detalių universalioji apvali šlifavimo staklė Knjdjwqlykepfx Abkof Kellenberger 1500 U - 175 (įskaitant vidinį šlifavimo įrenginį) Atstumas tarp centrų: 1500 mm - Centro aukštis: 175 mm Siemens servovariklis. Dažnio keitikliai viduje ir išorėje, WSS Parduodama su įvairia papildoma įranga. Prieinama iš karto! 1000U variantas: restauravimo procese

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: Kjdpfx Abod Ih Dvekjnf - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: geras (naudotas), STUDER Favorit S35 Cylindrical Grinding Machine Knsderakibspfx Abkjf

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ± 6° Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg including clamping device Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Knjdpfx Abed Ih Dwskef Geometrically overhauled and newly painted. Photos show identical 1000mm model. Included: - New control cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Lift-off function for grinding headstock - Modern internal grinding attachment - Operating tools Extension: Table swiveling increased to 10° Optional: - Swivel angle indicator for upper table - Swivel angle indicator for workpiece headstock - Swivel angle indicator for grinding headstock - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Kodpet Ii Rrsfx Abkjnf Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 250 mm, ruošinio svoris (maks.): 750 kg, šlifavimo ilgis: 2 000 mm, šlifavimo disko skersmuo: 500 mm, bendras plotis: 2 000 mm, bendras ilgis: 6 000 mm, bendras aukštis: 2 000 mm, šlifavimo skersmuo: 320 400 500 mm, šilko eigos atstumas: 50 mm, ruošinio svoris tarp centrų: 500 g, atstumas tarp centrų: 2 200 mm, ruošinio skersmuo tarp centrų: 500 mm, veleno greitis (maks.): 560 aps./min, veleno greitis (min.): 1 aps./min, padavimo ilgis Z ašis: 2 500 mm, šlifavimo veleno greitis: 1 400 aps./min, bendras svoris: 8 000 kg, garantijos trukmė: 24 mėnesiai, ruošinio veleno greitis (maks.): 560 aps./min, Įranga: sūkių greitis be galo kintamas, Main technical data: Swing diameter mm 320, 400, 500 Centre distance mm 1000, 1500, 2000, 3000 Kodpfjpy A Iujx Abkonf Maximum workpiece weight between centres kg 500 Maximum workpiece weight (chucked - including standard grinding wheel) mm 500 (600 mm optional) Peripheral speed m/sec 45 Taper of workpiece spindle, in tailstock quill Morse 5 Infinitely variable speed control of workpiece spindle rev/min 1-560 Minimum programmable increment: - in X-axis (diameter related) mm 0.001 - in Z-axis mm 0.005 Table swivel range ° +6/-4 Grinding wheelhead swivel range ° ±30 Workpiece headstock swivel range ° 90 Grinding spindle motor kW 11 Workpiece headstock motor kW 2.5 Total motor power kW 15 Pneumatic equipment supply pressure kPa 0.6 Machine weight kg approx. 8,000

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 250 mm, plotis centre: 1 500 mm, šlifavimo skersmuo: 500 mm, Griebtuvėlio eigos ilgis: 30 mm, Įranga: dokumentacija / vadovas, Mašina buvo iš dalies kapitališkai suremontuota ir apima, be kita ko, naują geometriją ir naują valdymo spintą. Guolis buvo pakeistas. TECHNINIAI DUOMENYS Apdirbimo sritis Atstumas tarp centrų: 1 500 mm Centrų aukštis: 250 mm Didžiausias šlifavimo skersmuo: 500 mm Stalo pasukimas: ± 8° Šlifavimo galvutė Šlifavimo disko matmenys: 400 x 50 x 127 mm Veleno apsukos: 1 500 / 1 700 / 2 200 aps./min Vidinis veleno gręžimo skersmuo: 90 mm Ruotinės laikiklis Ruotinės laikiklio pasukimas: 180° Veleno apsukos: 20 - 400 aps./min Kodpfxexgrd So Abkonf Vidinis kūgis: Morse 5 Griebtuvė Griebtuvės vidinis kūgis: Morse 4 Griebtuvės judesio eiga: 30 mm MAŠINOS DUOMENYS Pavaros Šlifavimo galvutės variklio galia: 3 kW Griebtuvės variklio galia: 0,9 kW Mašinos išmatavimai: 2 860 x 1 680 x 1 670 mm Svoris: 2 500 kg ĮRANGA Automatinis darbo ciklas Tepalo rezervuaras su siurbliu Vidinis šlifavimo velenas Išoriniai šlifavimo diskai Ausinimo įrenginys Dokumentacija Pastaba: Skaitmeninis indikatorių blokas gali būti įsigytas papildomai už 3 600 €.

Gamybos metai: 2024, Sąlyga: naudotas, Grinding wheel arbor: HSK 50 E Diamond grinding wheel diameter: 50 - 250 mm Max. grinding wheel width: 70 mm Grinding wheel bore diameter: 20 mm Speed of diamond/CBN wheel spindle: infinitely variable, 100 - 1000 rpm Grinding wheel radius: 0-30 mm Dressing wheel dimensions: 180 x 25 x 31.75 mm Dressing wheel speed: 200 - 2000 rpm Oscillation stroke of the dressing wheel: 0-70 mm Dressing wheel motor connection rating: 2.2 kW Weight approx.: 1400 kg Dimensions (L x W x H): 1850 x 2300 x 2100 mm Description: Suitable for dressing and profiling diamond and CBN grinding wheels. Equipment: - Full enclosure Kjdpfxjlfil Se Abkonf - Reinforced grinding wheel motor, 4 kW - Reinforced dressing wheel motor, 2.2 kW - 2 machine lights, 12 V - Glass scale on X and Z linear axes - 2/3" camera system with 17" LCD monitor (microscope with 15-120x zoom) - High-precision angle measurement device (0.05°) - Diamond/CBN wheel spindle, infinitely variable, 100 - 1000 rpm - Dressing wheel speed infinitely variable, 200 - 2000 rpm - Infinitely variable oscillation stroke speed - Automatic central lubrication - SIC manual dressing wheel.