Cilindrinio šlifavimo staklės - Universalios

KELLENBERGER 1000-175

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama naudota Kellenberger apvalaus šlifavimo staklė labai geros būklės. Kaina ženkliai sumažinta !!!!! Iiedpfxoxnxide Acueh

Sąlyga: visiškai atnaujintas (naudotas), Machine fully overhauled With digital display Iiodpfxewhk Uus Acush Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm With internal grinding device Various accessories MARCELS MASCHINEN AG

Sąlyga: naudotas, Description: Workpiece Spindle Head: Swivel Range: -10°/+100° Speed: 800 rpm Centre Height: 175 mm Internal Taper: MK5 External Short Taper: DIN 55026 Max. Workpiece Weight: 150 kg Grinding Spindle Head: Design: Tandem Grinding Spindle Head B-Axis: -210°/+30° Iijdowz T Azjpfx Acush Internal Grinding Unit: Internal Grinding Spindle Grinding Table (X-Axis): X-Axis Travel: 320 mm Max. Traversing Speed: 7.5 m/min Resolution: 0.1 μm Sub-Table (Z-Axis): Centre Distance: 1,000 mm Z-Axis Travel: 1,150 mm Max. Traversing Speed: 15 m/min Resolution: 0.1 μm Equipment / Accessories: Coolant Supply: Coolant System with Filter Emulsion Mist Separator: Mechanical Tailstock: MK4, stroke 50 mm Workpiece Measurement I: Movomatic TMP 91 Workpiece Measurement II: Movomatic TNU 91 Tool Measurement: Marposs A 90 Setup Mode: Electronic Handwheel Accessories: Various flanges, centres and chucks

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer ongoing service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, state-of-the-art CNC cylindrical grinding machine control featuring the BEMA grinding interface - Completely rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B axis) Iijdpfeuwv H Tsx Acush Standard Equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle headstocks T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B axis high-resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning with Marposs - GAP control (sensor on grinding spindle headstock), ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Options at Extra Cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle headstock - Measuring control - Extraction unit - Paper band filter Control Functions: Basic Grinding Cycles - Zeroing the workpiece with Z-pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional Grinding Cycles - External and internal profile plunge grinding with profile wheel - External and internal profile grinding with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Out-of-round grinding external and internal 15,000

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 16 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5000 kg TECHNICAL SPECIFICATIONS CNC: Fanuc 18TB Intermediate section Fixed intermediate section: Grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Iodew T Tb Hspfx Acujih Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100° Spindle speed (continuous): 6 – 600 min⁻¹ Internal taper mount: MT5 Reduction sleeve: MT5/MT4 Short taper external mount: DIN 55026 / Size 5 Admissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mount: MT4 Quill stroke: 50 mm / 2° Option: micrometric movement with correction (Ø +/- 150 µm) Grinding wheel data Diameter 300 mm: 27 m/s Diameter 400 mm: 35 m/s Diameter 500 mm: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left wheel mount, max.: Ø 500 x 80 mm Additional right wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers: 1000 mm, swiveling 0 to 9° Grinding slide (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max pressure connection: 3 bar Required space (version 1000): 3600 x 2000 mm All technical information is provided without obligation and subject to errors and omissions.

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Pagrindinė pavara Ašių skaičius: 4 Papildoma įranga Iijdpjw Spr Eofx Acujh Juostinis filtravimo sistema Ši 4 ašių KELLENBERGER Kel-Varia UR 175/1000 sukurta 1997 metais. Įrengta vidinio šlifavimo prietaisu su pasukama B ašimi ir C ašimi skirtais neapvalių formų šlifavimui, papildyta juostine filtravimo sistema. Pasinaudokite proga įsigyti šią KELLENBERGER Kel-Varia UR 175/1000 cilindrinio šlifavimo staklę. Susisiekite dėl išsamesnės informacijos. Taikymo sritys Šlifavimas

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As a world-leading company for Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality and with warranty, but can also offer you comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute encoder (for B axis) Standard Equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Optional at extra cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece spindle - Measuring control - Extraction unit - Paper band filter Control: Basic Grinding Cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Wheel measurement with BEMAT - Approach sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (traverse and plunge grinding) - External and internal taper grinding (B axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional Grinding Cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal Iisdpfxeuwv H Hj Acush 15,000

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X Iodeuxfucopfx Acuoih - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Iedpfx Ajt Ii Nbocueih Mechanically and visually as new Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive - Tailstock with micrometric adjustment - Fine adjustment of upper table - Paper band filter SBP4 240l

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Isdpfx Acjuxfupjusih Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.