Juostinis pjūklas

KASTO Kastotec A3

Sąlyga: geras (naudotas), Gamybos metai: 2001, Manufacturer: KASTO Model: KASTOtec A3 Year of manufacture: 2001 Specifications Metric Saw capacity round 90°: 330 mm Saw capacity flat 90°: 330 x 330 mm Maximum saw speed: 12 - 120 m/min Saw blade dimension: 6830 x 41 x 1.3 mm Power: 7.5 kW Gisdpfxou R R Acs Abdol Dimensions (approx.): Length: 4600 mm Width: 2150 mm Height: 2310 mm Weight: 4300 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Sąlyga: labai geros būklės (naudotas), Tuscan LC38 x 3000mm CNC Drehmaschine Umlaufdurchmesser über Bett: 970 mm Umlaufdurchmesser über Planschlitten: 420 mm Spitzenhöhe: 490 mm Spitzenweite: 3000 mm 12-fach Duplimatic Revolver Reitstock Ausbohrstangenhalterung Gedpjvtw Imjfx Abdsil Ausbohrstange 2 x 3-Punkt-Feste Lünette 1 x Mitlaufende Lünette Fanuc OiTC Steuerung C-Achse & angetriebene Werkzeuge Seriennummer: LC223806086 Baujahr: 2010 /10

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm Gsdpsd Auacefx Abdoil » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: labai geros būklės (naudotas), Neu 2008 Giodpfxsrfx Tnj Abdjl Umlaufdurchmesser über Bett – 600 mm (Ø 23,62 Zoll) Drehdurchmesser × Bearbeitungslänge – Ø 300 × 600 mm (Ø 11,81 × 23,62 Zoll) Max. Drehdurchmesser – Ø 380 mm (Ø 14,96 Zoll) Max. Verfahrweg Z-/X-Achse – 600 / 240 mm (23,62 / 9,44 Zoll) Z-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min X-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min Spindelbohrung / Zugrohrdurchmesser – Standard: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04 Zoll); Option: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03 Zoll) Spindeldrehzahl – Standard: 8" Spannfutter 3.500 U/min; Option: 8" Spannfutter 4.500 U/min, 10" Spannfutter 3.500 U/min Spannfutter-Durchmesser – Standard: Ø 8"; Option: Ø 10" Hydraulischer Reitstock – Hub 465 mm (18,3 Zoll), MK 4 VDI-Werkzeugstationen – Option: 8, Standard: 10 Kühlschmierstoffanlage Späneförderer Anschlusswert – 208–220 Volt / 100 Ampere / 3 Phasen / 60 Hz Stellfläche (L × B × H) – 4.080 × 1.675 × 1.842 mm (160,62 × 65,94 × 72,51 Zoll) Gesamtgewicht (ca.) – 5.200 kg (11.440 lbs)

Sąlyga: naujas, Gamybos metai: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via frequency converter. The Turbo 60 is available in both dry and wet versions. It can be optimally linked with the ERBA YE-60 separation unit shown in the images. Technical Data: - Gross volume: 60 L - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilt motor, soundproof lid, or separation box Prices are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with accessories and options which are available at extra cost. Gijdpfx Aben Ut Ilodel If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations take place by means of telecommunication (email, telephone, messaging portal). As a first step, we will send you a non-binding quotation, which also includes our general terms and conditions (with imprint) and information about your right of withdrawal before any purchase or contract is concluded.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Machining Center – Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of manufacture: 1999 The machine can be inspected under power and in operation by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (like new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/Axis drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ballscrew diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Path measuring system: Giedpfx Aov Nxbyobdol - Input resolution: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine stations: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (fixture weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (like new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of technical details and equipment. - Subject to prior sale -

Sąlyga: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 105 mm, tekinimo skersmuo virš slankiojančio stalo: 560 mm, tekinimo skersmuo virš viršutinio vežimo: 356 mm, centro aukštis: 280 mm, tekėjimo ilgis: 1 500 mm, veleno greitis (maks.): 1 600 aps./min, veleno greitis (min.): 25 aps./min, lovos plotis: 350 mm, įvesties srovės tipas: trifazis, trijų žandikaulių griebtuvo skersmuo: 320 mm, Centro atstumas ----- 1500 mm Centro aukštis ----- 280 mm Sukimosi skersmuo ----- 560 mm Pagrindinio veleno pralaidumas ----- 105 mm Staklių lovos plotis ----- 350 mm Veleno greitis ----- 25-1600 aps./min Variklis ----- 7,5 kW KOMPLEKTACIJOJE * 3 ašių skaitmeninis atvaizdavimas SINO * Greitai keičiama įrankių laikiklis Multifix TOOC3, su 4 laikikliais * Elektrinis stabdis * Kojinis stabdis * Savicentruojantis 3 žnyplių griebtuvas Gijdpfoga Tvlex Abdjl * Nepriklausomas 4 žnyplių griebtuvas * Prispaudimo plokštė * Fiksuota ir sekama atrama (centravimo lunetos) * LED darbo lempa * Aušinimo sistema * Dėžė su įvairiais įrankiais

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending Gsdjd Ab H Hspfx Abdeil • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2017, veikimo valandos: 6 900 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 300 mm, Maksimalus ruošinio svoris: 500 kg Judėjimo eigos: X: 350 mm Y: 250 mm Z: 300 mm C: 360° Pagaminimo metai: 2017 Gedpfx Abov Ai Uksdeil 16 vietų RTC keitiklis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Gisdpew Ucyujfx Abdol Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.