Sandėliavimo liftas

Kardex Remstar Megamat RS 350.1.3050.6.5

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), A Spinner simultaneous turning center with three turrets and a comprehensive range of accessories, spare parts, and tooling is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, spindle nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27,102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, 80 bar coolant/high-pressure system, chip conveyor, fire extinguishing system, an extensive tooling package, and further spare parts. Documentation available. On-site inspection possible. Kedpfx Asua E Troaujlr

Būklė: naujas, Matmenys (I x P x A): 1.630 x 700 x 1.200 mm Svoris apie: 480 kg Bendra galingumo poreikis: 1,1 kW Lenkimas: 2 Lakšto storis: 3 mm Lakšto ilgis: 1050 mm Kodpfx Aasd Eqqqouolr Techniniai duomenys Lakštų valcavimo staklės Volelio skersmuo: 90 mm Valcavimo greitis: 6 m/min. • asimetrinis volelių išdėstymas • 2 volai varomi stabdžio varikliu • Galinio volelio nustatymas su rankenėle • Išskleidžiamas viršutinis volelis • Kūginio valcavimo įtaisas • Dvigubas pakojų jungiklis dešinės/kairės eigai • Apatinis ir galinis volai su vielos grioveliais • Veikimo instrukcija VOKIEČIŲ kalba PAPILDOMAI: grūdinti volai – 900 EUR

Būklė: naujas, The manufacturer Zambelli Metalltechnik GmbH & Co.KG will discontinue support for all paternoster and storage lifts as of 31.12.2023. The company will no longer provide support or spare parts for these devices in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time. Kjdpfx Aasiy Dw Hsuelr

Būklė: labai geros būklės (naudotas), 2 kėlimo sistemos, Kardex XP 500, apie 7,35 m aukščio, 240 arba 495 kg / lentyna, lentynos matmenys: apie 2,45 m x 81 cm – naudotos - : Kaina už vienetą iš vietos: 26.950 € (be PVM), išmontuotos, supakuotos ir pakrautos, papildomai apmokestinamas transportas ir sumontavimas! Kljdpjx Ry Ddjfx Aauor Gamintojas: Kardex Tipas: Shuttle XP-500-2450-813 Įrenginio numeris: 17001175/001 Pagaminimo metai: 2017 Leistina bendra apkrova: 2x33.500 kg Lentynos apkrova: light 240 kg / strong 495 kg Lentynų skaičius: bus pateikta vėliau Lentynos dydis: 2450 x 813 mm Įrenginio matmenys: Plotis: bus pateikta vėliau (turėtų būti apie 2,78 m) Gylis: bus pateikta vėliau (turėtų būti apie 2,92 m) Aukštis: apie 7.350 mm 3/N/PE400V, 17,0A, 5,6 kVA Būklė: gera – labai gera, iš viso mažai naudotas Prieinama: nuo apie 2026 m. sausio vidurio Vieta: 71063 Sindelfingen

Būklė: geras (naudotas), Gamybos metai: 2009, Elumatec SBZ 140 Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F fitting, 8-position tool changer Max. milling diameter: 80 mm Max. saw diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Ksdpox E Ahzefx Aauelr It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotary A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system with PC operation, color display, USB & network. Software: eluCam. Automatic material clamps; automatic positioning via locating pins Pendulum/shuttle processing (two working zones) to improve production throughput time. In addition to milling and drilling, also tapping, sawing, and profile processing—all with stationary clamped profiles. Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend verifying all relevant details. Financial information VAT/Margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Būklė: geras (naudotas), Gamybos metai: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Klsdpohrnbksfx Aausr Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Būklė: naudotas, Gamybos metai: 2004, Techninės detalės: Ratų skersmuo - maks.: 130 mm Ratų plotis: 25 mm Modulis - maks.: 3 Modulis - min.: 0,5 Valdymas: Siemens 840D Smuiginės ašies skersmuo: 85 mm Smūgių skaičius - be pakopų: 500 - 2500 smūg./min Eiga: 30 mm Bendras galios poreikis: 48 kVA Mašinos svoris apie: 11,5 t Kledpfx Aevi Ninoausr Reikalinga erdvė (IxPxA): 4,7 x 3,0 x 3,3 m Įranga: -Priešpriešinis laikiklis su antgaliu -Drožlių transporteriu -Hidrauliškai valdomomis priešpriešinio laikiklio svirtimi ir linijinėmis kreiptuvėmis detaluose.

Būklė: naujas, - Capacity 1070 x 2 mm Kjdpfxohc Uvms Aauelr - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. Kledpfxefz U S Eo Aauer By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: naujas, Gamybos metai: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roll diameter: 110 mm Lower roll diameter: 110 mm Bending roll diameter: 110 mm Total power requirement: 1.1 kW Machine weight: approx. 0.9 t Space required: approx. 2.5 x 0.6 x 1.1 m New machine Kljdpfx Asvx Uvxeauor Cone bending device, hardened and ground rolls, motorised bending roll stationary control panel, digital display for the right and left bending roll, digital display for the lower roll