Salės šildymas

Kampmann Tip 5000 2-Stufen 157000573036

Būklė: geras (naudotas), Heater blower, heating unit, heat exchanger, air heater, air warmer, duct air heater, duct-mounted air heater, heating coil Nedpsu Scqhsfx Ahcewl -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000, 2-stage, 157000573036 -Output: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Quantity: 2x air heaters available -Price: per unit -Dimensions: 800/710/H730 mm -Weight: 49 kg/unit

Gamybos metai: 1997, būklė: paruoštas naudoti (naudotas), Travel X/Y/Z: 1300mm/1100mm/1000mm, Table dimensions X/Y: 800mm/800mm, Number of pallets: 14, Maximum table load: 2200kg, Table indexing: 0.001°. Spindle speed: 7000rpm, Spindle power: 50HP, Tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, Weight: approx. 24000kg. An on-site inspection is possible. Nwodpfx Ahetx Dn Uecel

Būklė: naudotas, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right Nodpjrg Exrsfx Ahcswl 5th shaft: top 6th shaft: bottom 7th shaft: universal shaft

Būklė: paruoštas naudoti (naudotas), Guntner Cooler Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spacing: 7 mm Provision for electric heaters Number of fans: 2 x 660 mm Fan speed: 870/650 rpm Unit dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Capacity: 54.8 L Njdpfshz T Igex Ahcjwl Weight: 275 kg Stock quantity: 4 units Stock number: CH259 Condition: used We offer a wide range of other refrigeration equipment. Refrigeration units, compressors, coolers, condensers, chillers, cold rooms, refrigerated furniture and catering equipment, as well as machines and devices for restaurants and meat processing. Check our other listings or call us, as not everything is listed on Machineseeker.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys Šlifavimo/ruošinio skersmuo: iki maždaug 300 mm (kartais iki 350 mm) Šlifavimo ilgis/eiga: apie 550 mm (stalo eiga) Modulio diapazonas (dantų pjūklo diskų atšlifavimui): modulis min. apie 0,5 iki modulis maks. apie 25 Pjovimo griovelių skaičius: paprastai 1–99 vnt. (priklausomai nuo įrankių rinkinio) Šlifavimo disko skersmuo: apie 150–300 mm Nedpfx Ajxtiunshcjwl Šlifavimo disko apsukų skaičius: iki maždaug 2 700 aps./min Atstumas tarp centrų (ruošinio velenas): tipinis intervalas 400–800 mm Pakreipimo/pasukimo diapazonas: pvz., šlifavimo disko galva 0–15° Mašinos svoris ir užimama vieta: pvz., apie 4,2–4,9 t; plotas apie 3 × 2,6 × 2,3 m Elektros duomenys: darbo įtampa pvz., 380 V trifazė, valdymas 24 V, pagalbinė įtampa 220 V

Būklė: geras (naudotas), Tailstock Quill size: MT 2 Quill stroke: 30 mm Height adjustable Njdpfxodlp Txs Ahcswl Centre height: 250 - 285 mm Tiltable from -5° to +15° Base dimensions: 230 x 155 mm Weight: 27 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, For sale: Used Rilesa Unix drilling machine Njdpsu Shx Djfx Ahcowl - 4 top drilling units - 4 rear drilling units - Right and left operation

Būklė: geras (naudotas), Riello RL50 oil burner Capacity: approx. 15 kg/h Viewing by prior telephone arrangement only! Preferential sale to dealers, businesses, or for export. All information provided without guarantee; errors and prior sale excepted. Nwsdpfxspiqips Ahcsl The seller accepts no liability for typographical or data transmission errors. We can, of course, handle all necessary formalities. Loading available.

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software Nodpfx Ajxwaz Hjhcowl - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K

Būklė: labai geros būklės (naudotas), Gamybos metai: 1988, TECHNISCHE DATEN. Max. Spannlänge: 90 mm Werkzeug-Spannhöhe mit Kegelschaft: 50 mm Werkzeug-Spannhöhe mit Zylinderschaft: 45 mm Max. Drallwinkel: 45° Anzahl der Spannpositionen: 1 bis 99 Max. Verfahrweg Schlitten: 550 mm Max. Schleifscheibendurchmesser: 350 mm Min. Schleifscheibendurchmesser: 150 mm Schleifscheibendrehzahl (stufenlos): bis 2.700 U/min Schwenkbereich der Schleifspindelachse: 0° bis 15° Vorschubgeschwindigkeit Schleitschlitten (stufenlos): 0,05 bis 16 mm/min (bei 3. und 4. Achse: 0,05 bis 8 mm/min) Werkstückspindelaufnahme: ISO Kegel Nr. 40 Daten zur Schleifscheibe CBN- und Diamant-Topfscheibe: Ø200 mm → min. DFF: 66 (3. Achse), 76 (4. Achse) Njdpfxswwkacj Ahcewl Ø250 mm → min. DFF: 16 (3. Achse), 26 (4. Achse) CBN-ES Kegelscheibe: Ø200 mm → min. DFF: 50 (3. Achse), 60 (4. Achse) Ø250 mm → min. DFF: 0 (3. Achse), 10 (4. Achse)