Automatinis diskinis pjūklas aliuminiui

Kaltenbach SKL 400 NA

Sąlyga: naujas, Gamybos metai: 2025, Quick miter adjustment from 30° to 150°, stepless, with 0.5° accuracy according to the scale. The miter pivot point is at the intersection of the saw band and the material stop, so there is no change in length measurement. End stops at 30° & 45° left and 30° & 45° right. Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Ksdpfx Ahjbi S Dis Ejdw Cutting pressure reduction by the own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section via hydraulic damping cylinder. Standard equipment with coolant unit, which can optionally be supplemented with a micro-dosing system. Machine base with chip tray. Saw band drive with end-of-stroke switch. Precision saw band carbide-roller guides. Painted silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw band mounted on the machine, 4/6 TPI. Operating manual and spare parts list on CD-ROM. Special equipment: Hydraulic lifting of the saw frame. Execution: Manual Miter capacity: 30° left: Ø 130mm; square 120x120mm 45° left: Ø 200mm; square 180x180mm 90°: Ø 260mm; square 300x260mm 45° right: Ø 200mm; square 180x180mm 30° right: Ø 130mm; square 120x120mm Motor: [kW] 1.8 Saw band: [mm] 3350x27x0.9 Saw band speed: 35/75 m/min Working height: [mm] 900

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Koded N H A Njpfx Ah Eodw Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Sąlyga: naudotas, Gamybos metai: 1983, Saw blade diameter: 400 mm Kdodpfx Ahotqqrzo Esw Cutting diameter: 130 mm Stroke: 150 mm Cutting area, square: 120 x 120 mm Cutting area, flat: 300 x 40 mm Cutting area at 45°: round 130 mm Cutting area at 45°: square 110 x 110 mm Cutting area at 45°: flat 245 x 40 mm Mitre cuts: double-sided 90° Cutting speed: 13 / 25 m/min Control system: minipos 807 Total power requirement: 4.3 kW Machine weight approx.: 850 kg Machine dimensions (L x W x H): 1.20 x 1.20 x 1.82 m Accessories: Infeed and outfeed roller conveyors, each approx. 4000 mm long, NC stop, coolant system

Sąlyga: geras (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 400 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 145 mm, bendras ilgis: 850 mm, bendras aukštis: 1 800 mm, bendras plotis: 1 100 mm, bendras svoris: 700 kg, Semi-automatic cold circular saw, new saw blade Ø 400 mm, cutting capacity approx. Ø 145 mm, motor 3.0 / 4.0 kW, 2-speed 1420/2880 rpm, vertical clamp, 2 manual horizontal clamps, stops at 30°, 45°, 60°, and 90° on both sides, coolant system, dimensions 85x110x180 cm, weight approx. 700 kg. Kdjdpfx Aswp Ipxjh Esw

Sąlyga: paruoštas naudoti (naudotas), Saw blade diameter: 450 mm, cutting width: 4 mm, saw blade type: carbide-tipped (HM)/high-speed steel (HSS), bore: 50 mm, mounting bolts: 4, bolt circle diameter: 80 mm, bolt diameter: M12. Saw blade feed speed: 3.5 m/min, rapid return: 4.5 m/min, feed rate: 10 m/min / 20 m/min, cut length single stroke: 10 mm / 1000 mm, double stroke: 2000 mm, turntable rotation: +/-90°. Machine dimensions (X/Y/Z): approx. 2700 mm / 1450 mm / 1900 mm, weight: approx. 1500 kg. Documentation available. Inspection on site possible. Kdsdpfxov Hgkqo Ah Ejw