Juostinis pjūklas

Kaltenbach KBS 620 DG

Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: nepatikrintas, Kaltenbach KBS 620 DG — Horizontalus dvigubas kampinis juostinis pjūklas, 2005 metai SpecifikacijaVertė Pjovimo pajėgumas 90°: 620 x 350 mm Pjovimo pajėgumas 70°: 610 x 350 mm Pjovimo pajėgumas 60°: 570 x 350 mm Pjovimo pajėgumas 45°: 470 x 350 mm Pjovimo pajėgumas -45°: 430 x 350 mm Pjovimo kampų diapazonas: +60° / -45° (dvigubas kampas) Juostos matmenys: 6175 x 41 x 1,3 mm Juostų tipai: Bi-metal M2, M42, M51 Pjovimo greitis: 15–90 m/min (bežingsniškai reguliuojamas) Padavimo greitis: maks. 400 mm/min Konstrukcija: dvigubo stulpo, sunki plieninė konstrukcija Valdymas: NC valdomas kampo nustatymas Programinė įranga: Kaltenbach PROFICUT Gsdsyrgrpepfx Ap Ijuc Aušinimas: oro aušinimas + mikro alyvos tepimas Svoris: apie 2 600 kg Savybės: Tinka pjauti plienines profilius, vamzdžius ir plokštes. Hidraulinis prispaudimas po kampo nustatymo, bežingsniškai reguliuojamas juostos padavimas, NC valdomas ilgio matavimas.

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Gjdpfx Apsfxpbme Isuc

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Gusdpjt Hw Shefx Ap Iec Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced, CNC-controlled notching and cutting system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location via a pull-type clamp measuring carriage on the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The finished cut or notched components either fall into a collection tray or are pushed out of the system by the measuring arm. Gjdpfxstwm Ubs Ap Ijuc Thermal cutting units: The Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting with oxy-fuel and/or plasma. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD is used, suitable for material thicknesses up to 32 mm. Thicker materials or bevel cuts exceeding 32 mm are processed using the oxy-fuel cutting unit. Transport system: On the infeed side, ahead of the Ficep Flex FRC notching system, there is a chain drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported on a sturdy roller conveyor into the machine using a clamp measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a roller conveyor width of 1,300 mm on both the infeed and outfeed sides. For removal of finished components on the outfeed side, there are four chain drag transverse conveyors, each 6,450 mm long, installed after the notching system. Mitrol CNC control and Pegaso Software: The system is operated using a modern CNC control unit from Mitrol. This reliable CNC control is developed by Ficep’s in-house manufacturer Mitrol and includes Pegaso software with remote maintenance capability and a data transfer interface. Torit DCE Filter Unit: The dust extraction filter unit is supplied by Donaldson Torit DCE. Safety: via fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Gamybos metai: 2007, būklė: geras (naudotas), Danobat CNC Bohr-/Sägeanlage – Baujahr 2007 Einzelner rotierender Bohrspindel. 18 Meter Einlaufrollenbahnen. 12 Meter Auslaufrollenbahnen. Pinchereinheit für den Vorschub. Quertransfers am Einlauf. Quertransfers am Auslauf. Kapazität: 750 mm. Sägekapazität: Runde Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 520 mm. Rechteckige Schnittkapazität (ohne vertikale Spannbacken, Winkel 0 Grad): 700 mm x 500 mm. Maximale Kapazität mit vertikalen Spannbacken: 700 x 500 mm. Runde Schnittkapazität bei 45 Grad Drehung: 450 mm. Guodpeig T Amofx Ap Iec Rechteckige Schnittkapazität bei 45 Grad Drehung: 450 x 500 mm.

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 680 mm, bendras plotis: 2 350 mm, bendras aukštis: 1 350 mm, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 1 800 kg, Apvalaus plieno pjovimo diapazonas ties 45°: 300 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 325 mm, juostinio pjūklo ilgas: 4 400 mm, pjūklo juostos plotis: 34 mm, darbinio aukščio: 750 mm, pjovimo greitis: 150 mm/min, aukščio reguliavimo tipas: hidraulinis, Technical data: Clamping range for bundle clamping: Width: 0 – 300 mm Height: 5 – 300 mm Material feed: Single 0 – 600 mm Multiple 0 – 9999 mm Residual piece length: Manual: approx. 70 mm Automatic: approx. 300 mm Cutting speed: 15 to 150 m/min – AC drive Cutting pressure: infinitely variable, hydraulic Descent speed: 0 to 300 mm/min – stepless Bandsaw blade dimensions: 4400 x 34 x 1.1 mm Bandsaw blade tension: With torque wrench Machine weight: approx. 1800 kg (net) Machine dimensions (L x W x H): approx. 2680 x 2350 x 1350 mm Max. support load: Material weight max. 250 kg/m Working height: 750 mm With installation elements approx. 800 mm (option) Godeq Atyzspfx Ap Isuc Noise emission: 74 dB(A) Measured at the operator's workstation Including both pictured roller conveyors.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), A complete CNC double-gantry plasma cutting system by MicroStep, equipped with an oxy-fuel torch for nesting, bevel cutting, and pipe processing, is available. 1) Plasma cutting machine, max. processing length: 16,500 mm, max. processing width: 2,500 mm, max. processing width including nesting station: 3,700 mm, max. material thickness stainless steel/mild steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma power source. Gantry 2: fully automatic acetylene oxy-fuel torch, with provision for fitting a second torch carriage. Pipe cutting unit: pipe diameter range: 30 mm - 700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. 2) Donaldson Cyclopeel DFPRO 16 filter system, air flow: 16,000 m³/h, filter elements: 16. Documentation available. Inspection on site is possible. Expected to be available from late 2025/early 2026. Photos are from initial commissioning in 2014. Gujdjwmqwyopfx Ap Iec

Gamybos metai: 2000, būklė: geras (naudotas), didžiausias leistinas svoris: 5 400 kg, Strypo skersmuo (maks.): 40 mm, sienelės storis: 50 mm, mašinos/transporto priemonės numeris: 26130,

Būklė: naudotas, Gamybos metai: 2006, Webhöhe min. 80 mm, max. 1220 mm. Flanschhöhe min. 42 mm, max. 600 mm. U-Profile min. 80 mm, max. 1200 mm Flanschhöhe min. 45 mm, max. 300 mm. Winkelprofile min. 80 x 80 x 8 mm, max. 300 x 300 x 50 mm Flachstahl min. 100 mm, max. 1220 mm Quadratrohre min. 80 x 80 mm, max. 600 x 600 mm Rechteckrohre min. 80 x 40 mm, max. 1200 x 600 mm Maximales Positioniergewicht: 15.000 kg Maximales Liniengewicht des zu bearbeitenden Profils: 750 kg/m Max. Verfahrgeschwindigkeit: 30 m/min Anzahl Bohrspindeln: 3 - Zwei horizontale Bohraggregate mit einzelnem Spindel - Ein vertikales Bohraggregat mit einzelner Spindel Maximaler Bohrdurchmesser: 50 mm - mit Morsekegel Nr. 4 Maximale Bohrstärke: 75 mm Motorleistung pro Spindel (Wechselstrom): 15 kW Spindeldrehzahl (stufenlos programmierbar): 180–3000 U/min Positionierweg zur Anpassung an die Teilungslinie: - Vertikale Bohrspindel: 20–1200 mm - Horizontale Bohrspindeln: 10–600 mm WERKZEUGWECHSEL - Anzahl Werkzeugwechsler: 3 - Anzahl wechselbarer Werkzeuge: 6 - Werkzeugaufnahme ISO 45 Modell 1260 BH für Profile-Kaltsägeschnitte: - Sägeleistung 90°: min. 80 x 10 mm - Sägeleistung 90°: max. 1250 x 600 mm - Sägeleistung 45°: max. 800 x 600 mm - Sägeleistung 60°: max. 500 x 500 mm Gjdpfx Asx N Iclep Isuc - Sägebandantrieb 11 kW - Schnittgeschwindigkeit: 20–100 m/min - Sägebandabmessung: 67 x 1,6

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 84659300, Mašina susideda iš 3 darbo modulių: Godpfx Aexn Ifujp Ieuc 1. XSV šepečiai (12 besisukančių ir osciliuojančių šepečių) 2. XSV šepečiai (12 besisukančių ir osciliuojančių šepečių) 3. Volelinis šepetys Padavimo juosta 1350 mm.