Įpjovimo sistema

Ficep 1201 FRC

Sąlyga: geras (naudotas), Gamybos metai: 2016, FICEP 1201 FRC Bedpfjva Hfnox Agijcw Minimales Profil: 80 x 42 mm Maximales Profil: 1220 x 60 mm 1 x Autogen-Brenner 1 x HYPERTHERM HPR 260XD Plasmaschneidkopf Absauganlage

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off Bcodpjfg E Hlefx Agijw 5. Raise frame just above the material 6. Open vice

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Bodpfx Agsu Aa I Sjiecw Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Gamybos metai: 2009, Sąlyga: geras (naudotas), Lifting capacity: 30 t Bcodpfxjqiz N Ro Agijw Precision lift Lifting height: 9 meters

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Fervi T047/400VDA pavaros reduktorinis gręžimo-frezavimo staklės, sriegiklis, 400V 1,5 kW. NAUJA GAMYBA, atitinka CE standartus. Akcijos kaina – galiojimas ribotas, kol yra sandėlyje. Įrenginys tinkamas šioms operacijoms: frezavimui, gręžimui, sriegimui. Gręžimo į ketaus maks. diametras su išankstiniu skylimu: ø 40 mm. Gręžimo į plieną maks. diametras su išankstiniu skylimu: ø 32 mm. Frezavimo su keičiamomis plokštelėmis galvute maks.: ø 80 mm. Frezavimo galimybė: ø 25 mm. Sriegimo galimybė: ø 22 mm. Kūginis tvirtinimas: CM 4. Griebtuvo eiga: 130 mm. Griebtuvo diametras: ø 76 mm. Kolonos diametras: ø 115 mm. Galvos pasvirimas: ±60°. Veleno greičiai (12): 75 ÷ 3200 aps./min. Trifazis variklis: 400 V, 50 Hz, 1,1–1,5 kW. Stalo matmenys: 585 x 190 mm. Lizdo plotis: 12 mm. Bazės matmenys: 648 x 412 mm. Bendri išmatavimai: 740 x 790 x 1960h mm. Svoris: 390 kg. Bcsdeg Npiwspfx Agiew

Sąlyga: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) Bcsdpfx Agsd Iipmjijw - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Sąlyga: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm Bedpfjlgvkisx Agiscw

Sąlyga: naujas, Gamybos metai: 2025, RETRAKTABILE FLÜSSIG-LACKIERKABINE Retraktabile Lackierkabinen sind für die manuelle Lackieranwendung mit seitlicher Absaugung konzipiert, um beim Auftragen von Flüssiglacken entstehenden Overspray abzusaugen. Der Vorteil der retraktabilen Flüssig-Lackierkabinen besteht darin, dass sie Platz in der Werkstatt sparen. AUFBAU Bjdpfx Aovxfkaegiscw Die Konstruktion besteht aus einem Scherensystem-Gestell, gefertigt aus elektrogalvanisierten rechteckigen und runden Rohrprofilen und von außen mit PVC-Planenmaterial bespannt. Das Fahrwerk umfasst Industrie-Schwerlastrollen oder ein Schienen-Rad-System, welches je nach Einsatzort (innen/außen) und Kabinenlänge empfohlen wird. Ein Vorhangtor sorgt für das Abschließen der Kabine während des Lackiervorgangs. LÜFTUNGSSYSTEM Die seitliche Absaugung gewährleistet eine hocheffiziente Entlüftung während der Lackieranwendung. Die Filterwand ist modular aus verzinktem Stahlblech gefertigt, verfügt über Regalflächen und auf beiden Seiten über eine Notausgangstür. Der Absaugventilator sitzt auf der Filterwand, während der Elektromotor außerhalb des Luftkanals montiert ist – so gibt es keinen direkten Kontakt zwischen Motor und belasteter Luft, wodurch das Risiko von Funkenbildung eliminiert wird. FILTRATIONSSYSTEM Das Absaugfiltersystem arbeitet zweistufig mit 99,9 % Abscheidegrad und ist seitlich an der Filterwand positioniert. Ein Vorfilter am Vorhangtor gewährleistet während des laufenden Betriebs des Absaugventilators einen natürlichen Lufteinlass. Eine Kontrollleuchte am Bedienfeld signalisiert, wann die Filter gereinigt oder ersetzt werden müssen. Made in Türkiye CE-Kennzeichnung Wir bieten Ihnen die besten technischen Lösungen zu wettbewerbsfähigen Preisen. * Vertretungen in Frankreich und Deutschland. Kontaktieren Sie uns für weitere Informationen und Angebote.

Sąlyga: naudotas, Mitre Cold Circular Sawing Machine Automatic KALTENBACH Type KKS 400 NA Machine No. 101701 Year of Manufacture 1983 Saw Blade Diameter: 400 mm Cutting Capacity at 90° Round: Ø 130 mm Cutting Capacity at 90° Square: 120 x 120 mm Cutting Capacity at 90° Rectangle: 305 x 20 mm Cutting Capacity at 45° Round: Ø 130 mm Cutting Capacity at 45° Square: 110 x 110 mm Cutting Capacity at 45° Rectangle: 245 x 30 mm Clamping Range, Vice Feed: 30 to 140 mm Working Height: 1000 mm Mitre Cutting: 0 - 180° Feed Travel: 600 mm Saw Blade Speed: 10 + 20 m/min, 2 stages Motor Power: 1.7 and 2.6 kW Hydraulic Motor: 1.5 kW Electrical Connection: 380 Volt, 50 Hz - Hydraulic material vice feed with 1500 mm infeed roller conveyor on the left - Dual-stage feed travel up to 1200 mm (feed twice, then saw) - Hydraulic material clamping with vertical clamping cylinder - Mitre cut – saw angle adjusted manually - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for saw blade speed - Infinitely adjustable saw blade stroke - Coolant system with electric pump integrated in machine base - Hydraulic unit fixed on the base machine Bcedpjd N H A Nsfx Agijw - Piece counter with zero reset Space requirement of saw: 2600 x 1200 x 1900 mm Weight of saw: approx. 1400 kg In good condition

Sąlyga: labai geros būklės (naudotas), rida: 295 000 km, galia: 405 kW (550,65 AG), pirmoji registracija: 10/2015, kuro tipas: dyzelinas, ašių konfigūracija: 6x2, kuras: dyzelinas, stabdžiai: variklio stabdymas, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2015, veikimo valandos: 1 828 h, Įranga: elektriškai reguliuojamas veidrodis, oro kondicionavimas, priekabos jungtis,