Liepsnos pjaustymo mašina

FICEP 1201 FRC

Būklė: naudotas, Gamybos metai: 2016, mašinos/transporto priemonės numeris: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This advanced, CNC-controlled notching and cutting system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location via a pull-type clamp measuring carriage on the roller conveyor. A robotic arm equipped with cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The finished cut or notched components either fall into a collection tray or are pushed out of the system by the measuring arm. Thermal cutting units: The Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting with oxy-fuel and/or plasma. As the plasma power source, a Hypertherm HYPERFORMANCE PLASMA HPR 260 XD is used, suitable for material thicknesses up to 32 mm. Thicker materials or bevel cuts exceeding 32 mm are processed using the oxy-fuel cutting unit. Rjdstwm Ubjpfx Akzot Transport system: On the infeed side, ahead of the Ficep Flex FRC notching system, there is a chain drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. Subsequently, the profiles are transported on a sturdy roller conveyor into the machine using a clamp measuring carriage. The system is designed for profiles up to 12 m in length and thus features 12 m roller conveyors with a roller conveyor width of 1,300 mm on both the infeed and outfeed sides. For removal of finished components on the outfeed side, there are four chain drag transverse conveyors, each 6,450 mm long, installed after the notching system. Mitrol CNC control and Pegaso Software: The system is operated using a modern CNC control unit from Mitrol. This reliable CNC control is developed by Ficep’s in-house manufacturer Mitrol and includes Pegaso software with remote maintenance capability and a data transfer interface. Torit DCE Filter Unit: The dust extraction filter unit is supplied by Donaldson Torit DCE. Safety: via fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Būklė: geras (naudotas), Gamybos metai: 2007, BOHRMASCHINE Arbeitsbereich V630/1000M Min. / max. Höhe 10 – 450 mm Min. / max. Breite 60 – 1.050 mm Max. Positioniergewicht 9.000 kg Rsdpfx Asvpafyekzst Anzahl Bohraggregate 3x Automatischer Werkzeugwechsler 3x (je 5 Positionen) Höhenmessung Inklusive Breitenmessung Inklusive Maschinengewicht 12.000 kg Rollen-Vorschub-Messsystem Max. Vorschubgeschwindigkeit 42 m/min Minimale Einfuhrlänge 1.500 mm Bohraggregat VD40 Vorschub und Positionierung Servomotoren mit Servoumrichtern Spindeldrehzahl Stufenlos 100 – 2.500 min⁻¹ (Servoantrieb) Schmierung Innen, Luft/Öl-Nebelschmierung Werkzeugaufnahme SK 40 Bohrerdurchmesser Rohrbohrer 8 – 40 mm Bohrerdurchmesser Hartmetallbohrer 13 – 32 mm Gewindeschneiden M8 – M24 Anreißmarkierung möglich Ja, 3 Seiten SÄGEMASCHINE Sägemaschine VB1050 Schnittkapazität (H x B) 0° 500 x 1.130 mm Schnittkapazität (H x B) +/- 15° 500 x 1.060 mm Schnittkapazität (H x B) +/- 30° 500 x 925 mm Schnittkapazität (H x B) +/- 45° 500 x 725 mm Schnittkapazität (H x B) +/- 60° 500 x 470 mm Sägebandgeschwindigkeit stufenlos 40 – 120 m/min Sägebandantrieb 7,5 kW Sägebandabmessungen 9.550 x 54 x 1,6 mm Hydraulische Bandspannung 48.000 N Maschinengewicht +/- 8.500 kg

Būklė: geras (naudotas), Gamybos metai: 2012, CNC portalinis plazminio pjovimo staklė Gamintojas: Microstep Tipas: SPL PAA 9001.25 Pagaminimo metai: 2012 CNC valdymas Darbinis plotas: 2.500 x 9.000 mm 1 plazminis degiklis su Kjellberg HiFocus 280i srovės šaltiniu 2 autogeniniai degikliai su propanu Vibracinis tiekimo stalas Beuting Filtravimo įrenginys Donaldson DFPRO12 lauko montavimui 16426ä Rsdpfx Aju U Hm Aokzot

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Voortman V613 / VB1050 Split-System CNC-Bohr-/Sägelinie – Baujahr 2012. Drehspindel. Automatischer Werkzeugwechsler. 24 Meter Einlauf zur VB1050. 24 Meter Auslauf zur V613 CNC-Bohrlinie. 24 Meter Auslauf. Rollenbahnzuführung. VACAM CNC-Steuerung. Kurzstückausschleusung. Redpfx Asv U Ea Hekzst

Gamybos metai: 2013, būklė: geras (naudotas),  Plasma-Schneid- und Absaugtisch, Abmessungen 2.500 x 6.000 mm. Rjdpotp Dhpsfx Akzst  Portalbrücke.  Fahrwagen mit Servoantrieben (zur Positionierung der Portalbrücke in X-Richtung).  Maschinenfahrbahn, Länge 8 m.  HEB450-Profile für das Fundament der Maschinenfahrbahn, 8 m.  Plasma-Schneideinheit Hypertherm HPR 400XD, 1 Stk.  Fasen-Schneideinheit für Plasma, inkl. automatischem Höhenkontrollsystem.  Absauganlage Filtercube 4H für Plasma-Schneideinheit.  Autogen-Brennschneider, 3 Stk.  Automatisches Höhenkontrollsystem IHT M4000 CAP für Autogen-Schneideinheit, 3 Stk.  Brennerhalterung für Autogen-Brenner (motorbetrieben).  Brennerhalterung Single Drive für Autogen-Brenner, 2 Stk. (automatische Brennerpositionierung).  Laserpointer (zum Ausrichten und Positionieren des Brenners).  Computersteuerung (bestehend aus Industrie-PC und Bedienpult).  Steuerungssoftware 'VACAM Machine Edition' (inkl. VaCad- und VaNest-Software sowie Online-Support).  Automatische Verschachtelungssoftware Sigmanest „Powerpack“ (inkl. 3-tägiger Schulung für max. 3 Personen bei Voortman Holland (Reise-, Verpflegungs- und Übernachtungskosten nicht enthalten) und 1 Tag Online-Support).  Not-Aus mit Reißleine.  Baujahr: 2013.

Gamybos metai: 2009, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 120P1109, OFFER 21407 Motorized tank rotating device with rail-mounted undercarriage Redpfxohcnhmj Akzst Technical data: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per tank turning unit: 20,000 kg - Workpiece diameter approx.: 500 - 3,500 mm - Center distance of support rollers adjustable via trapezoidal spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-sided drive - Infinitely variable rotation speed control - Handheld remote control for forward and reverse - Drive: 400 V - Both units are mounted on rail undercarriages - Space requirement powered unit approx.: W 3,800 x H 1,150 x D 1,350 mm - Space requirement idler unit approx.: W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit approx.: 2,500 kg - Weight idler unit approx.: 1,800 kg

Būklė: naujas, The Jantar is the most popular model among Eckert machines due to its dynamics and efficiency. It is used by large industrial companies as well as medium-sized enterprises seeking an economical and reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be supplemented with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, as confirmed by hundreds of customers across Europe. Main features • Attractive price for a well-equipped base version • High-dynamic and precise cutting for 2D applications, pipes, and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Extensive database with predefined cutting parameters • Optional extension of the working area length Technical data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working lengths: Any length from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Rodpfjf Alb Aex Akzst Working height: 740–760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Būklė: naudotas, Gamybos metai: 2019, CNC portalo plazminio pjovimo staklė Gamintojas: Microstep Tipas: MasterCut Compact 4001.20Ptk Metai: 2019 CNC valdymas Darbinis plotas: 2 x 4 m Plazminis rotatorius „MasterCut“ su visiškai automatiniu palaikymu suvirinimo siūlių paruošimui 1 plazminis degiklis su Kjellberg HiFocus 280i maitinimo šaltiniu TEKA filtravimo sistema Rodpsxnmbnefx Akzet kod. ä16426

Būklė: geras (naudotas),

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 48 412 h, TRUMPF TruLaser 7040 Twin-head laser cutting machine Year of manufacture: 2012 Rodpovnra Hofx Akzst Power: 2 x 3200 W Operating hours: 48,412 h Machine weight: 16,000 kg Available from Q2 2025! Further information available on request.