Dyzeliniai krautuvai

Kalmar DCD200-12LB

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 2825, Gamybos metai: 2002, keliamoji galia: 20 000 kg, kėlimo aukštis: 4 070 mm, stiebo tipas: dupleksas, šakių laikiklio plotis: 250 mm, šakių ilgis: 2 400 mm, bendras ilgis: 6 020 mm, bendras plotis: 3 100 mm, darbinė masė: 31 200 kg, papildomos įrangos savybės: Warning triangle, Manual sliding cabin, Dual tread, Rear mud guards, Įranga: apšvietimas, Kalmar DCD200-12LB iš Uniktruck Ppedpfxequwnao Ah Hsl

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Available for sale are a Rehm Invertig Pro 350 AC/DC and a Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC - Standards: IEC 60 974-1, IEC 60 974-2 - Welding current range (TIG): 3–350A - Output voltage U₂ (at max. current): approx. 24V Ppedpjxddamsfx Ah Hol - Open-circuit voltage U₀: approx. 91V - Duty cycle (ED): 100% (for TIG at 350A) - Mains voltage/input: 3-phase, 400V, 50Hz - Protection class: IP 23S - Insulation class: S - Adjustable range: 3–350A (TIG for this AC/DC variant) - Duty cycle: 100% at 40°C, 350A (TIG), 100% ED - Input fuse: 32A (at 3x400V for 350 AC/DC variant) - Dimensions: Length 520mm, Width 360mm, Height 460mm - Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC - Standard: IEC 60 974-1 - Welding current range (TIG): 3–450A - Output voltage U₂ (at max. current): approx. 28V - Open-circuit voltage U₀: approx. 91V - Duty cycle (ED): 100% at 450A (TIG); lower for electrode welding (approx. 60%) - Mains/input: 3x400V, 50Hz - Protection class: IP 23S - Duty cycle: 100% ED, 450A (TIG) at 40°C - Electrode welding (stick): approx. 360A at 100% ED for electrode on 450 DC version - Power / Input fuse: 32A at 400V (3-phase) for 450 version - Dimensions: Length 520mm, Width 360mm, Height 460mm - Weight: approx. 28kg On-site inspection is possible.

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min Ppodex Eh Iqepfx Ah Hel - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 1 gebrauchte Haeger 412 Einpressmaschine für Blech-Befestigungselemente, Bolzen & Muttern, selbstklemmend, zu verkaufen. Mit Werkzeugen und J-förmigem Unterwerkzeug. Ppsdpjwbhipofx Ah Hsl

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1990,

Sąlyga: naujas, MEP SHARK 230-1 NC HS 5.0 Double-Column Metal Band Saw Article Number: SH230-1NCHS Motor Power: 2.2 kW Vice Opening: 235 mm Blade Dimensions: 2950x27x0.9 mm Weight: 1,000 kg Cutting Speed: 15 - 100 m/min (stepless) Cutting Capacity 0°: 230 / 230x230 mm Cutting Capacity 45° right: Cutting Capacity 45° left: Cutting Capacity 60° right: Pjdpfx Ahschhfuj Hjpl Cutting Capacity 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic double-column fully automatic band saw with both semi-automatic and fully automatic operating modes. Max. remnant length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled band saw with the new MEP 50 – Windows-based control system. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke: 500 mm, repeatable to saw any length. Simple programming – enter cutting length and quantity, then press "START". Electronic blade tension control. Automatic cutting load monitoring through a servo valve mounted directly on the cylinder. Rotation control of the blade with instant stop in the event of a jammed saw blade.

Sąlyga: naudotas, Gamybos metai: 2008, Used drilling center from CMA Type: TRD 40 CN 9000 Table length: 9000 mm Maximum capacity: 40 mm Ppsdpfxewc Ndws Ah Hjl Automatic tool changer Year of manufacture: 2008

Sąlyga: beveik kaip naujas (parodų įrenginys), stalo ilgis: 500 mm, stalo plotis: 300 mm, Surface grinding machine Ziersch Z35 - Demonstration machine, unused - Pjdpevvwf Djfx Ah Hopl Grinding range: 500mm x 350mm Dresser Permanent magnet Belt filter system with magnetic separator

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Presavimo jėga: 220 kN, darbo sritis kombinuotame režime X/Y: 2585 mm/1650 mm, darbo sritis presavimo režime: 3085 mm/1740 mm, darbo sritis lazerio režime X/Y: 3085 mm/1650 mm, didžiausias lakšto storis statybinis plienas/nerūdijantis plienas/aliuminis: 8 mm/6 mm/4 mm, didžiausias ruošinio svoris: 230 kg. Pozicionavimo greitis: 109 m/min, didžiausias taktų skaičius: 900 taktų/min, didžiausias ženklinimo našumas: 2800 taktų/min, įrankių vietos: 18, tikslumas: +/-0,1 mm. Staklių matmenys X/Y/Z: apie 8000 mm/9000 mm/2500 mm, svoris: apie 22 500 kg. Dokumentacija yra. Galimas apžiūrėjimas vietoje. Tikėtina, kad bus prieinama nuo 2025 m. lapkričio. Podjxddagjpfx Ah Hepl

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, veikimo valandos: 15 996 h, bendras svoris: 6 750 kg, įėjimo įtampa: 400 V, 1000 kN Max. stroke: 200 Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50 Hz Rated current: Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV (accident prevention regulations) inspection performed at regular intervals / maintenance always carried out regularly by Amada Pedjtwliwopfx Ah Hspl Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holders: 4 pcs UKB base for double V die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Other: Light curtain in need of repair (replacement value approx. €4,500) – included separately as a spare part (has been replaced) The machine can be inspected live under power in DE84051 Mettenbach by appointment. Sale only to businesses and under exclusion of any warranty!